• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.72-77
• /
• 2007

This study was conducted to investigate the effect of functional cover film on oriental melon fruit quality under unheated plastic greenhouse cultivation in cold period. The 6 kind of films having different characteristics were covered at plastic greenhouses and oriental melon seedlings were cultivated at 2 regions of Seongju, respectively. The air-temperatures in plastic greenhouses of J-1 and J-2, having high infrared absorption rate, were about $2{\sim}5^{\circ}C$ higher than K-3. The contents of ${\beta}-carotene$ and sugar of fruit showed significant difference between functional and normal films. The sucrose, determining a sweetness during maturation, and soluble solids content of fruits cultivated in J-1, J-2, J-3, and K-1 were higher than those of K-2 and K-3. Ascorbic acid of fruits was highest in K-2 having low light transmission rate and thermo-keeping capacity. There was no significant difference in mineral content among all of cover films. These results indicated that the use of functional greenhouse covering films could improve fruit quality such as ${\beta}-carotene$ and sugar content of oriental melon.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.288-293
• /
• 2016

The study was performed to evaluate thermal insulation covering materials (TICMs) to protect peach trunks against freezing temperatures in winter season by investigating thermo-physical properties and practical thermal insulation effect of the TICMs which was made of white non-woven fabrics, yellow paper sheets, and waterproof fabric pads. Among the three TICMs, Waterproof fabric pad (double layer) possessed the best performance about thermal insulation rate and thermal resistance among three kinds of TICMs. Day thermal insulation effects of waterproof fabric pad, which prevent from temperature rise on the bark tissues of trunks during the day time, were $14.09^{\circ}C$. Night thermal insulation effects of them, which prevent from temperature decline on the bark tissues of trunks at night time, were $7.23^{\circ}C$. Waterproof fabric pad showed the highest day and night thermal insulation effects. Thus our results suggest that development of TICMs using waterproof fabric pad might be helpful to protect the bark tissues of trunks from freezing injury.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.314-319
• /
• 1972

N-Methyl-p-aminophenol was polymerized by oxidative couplng in the aqueous iron chelate solution in the presence of oxygen, and black precipitate of oligo-(N-methyl-p-aminophenol) was formed quantitatively. In this oxidative polymerization reaction, methyl group attached to N in the monomer was partly eliminated, and it was clarified by the infrared spectra from the fact that the absorption of ${\delta}\;asym\;CH_3\;1460\;cm^{-1}$ and ${\delta}\;sym\;CH_3\;1380\;cm^{-1}$ in acetone insoluble fraction was much weaker than that in acetone soluble fraction. From Thermo-gravimetric analysis, oligo-(N-methyl-p-aminophenol) showed about 40% weight loss at $600^{\circ}C$ and it was less heat-resistant than oligo (p-aminophenol) that methyl group was not contained. In pyrolysis of oligo-(N-methyl-p-aminophenol) in He atmosphere, monomer N-methyl-p-aminophenol and water were formed, and in the pyrolytic gases, $H_2,\;CO,\;CO_2$ were detected by gas chromatography. From the above facts, to the structural change on oligo-(N-methyl-p-aminophenol) when it was heat-treated, it was considered that original linear structure was partly degraded, and the most of the oligomer was to go in with melt polycondensation to form polymer, and heat-resistant cyclic structure was formed at a time.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.103-111
• /
• 2017

In this study, the thermomechanical stress and fatigue analysis of a high voltage and high current (3,300 V/1200 A) insulated gate bipolar transistor (IGBT) module used for electric locomotive applications were performed under thermal cycling condition. Especially, the reliability of the copper wire and the ribbon wire were compared with that of the conventional aluminum wire. The copper wire showed three times higher stress than the aluminum wire. The ribbon type wire showed a higher stress than the circular type wire, and the copper ribbon wire showed the highest stress. The fatigue analysis results of the chip solder connecting the chip and the direct bond copper (DBC) indicated that the crack of the solder mainly occurred at the outer edge of the solder. In case of the circular wire, cracking of the solder occurred at 35,000 thermal cycles, and the crack area in the copper wire was larger than that of the aluminum wire. On the other hand, when the ribbon wire was used, the crack area was smaller than that of the circular wire. In case of the solder existing between DBC and base plate, the crack growth rate was similar regardless of the material and shape of the wire. However, cracking occurred earlier than chip solder, and more than half of the solder was failed at 40,000 cycles. Therefore, it is expected that the reliability of the solder between DBC and base plate would be worse than the chip solder.

• Clean Technology
• /
• v.13 no.4
• /
• pp.266-273
• /
• 2007

The adsorption properties of the activated carbon-based adsorbents were studied to remove COS emitted from $SO_2$ catalytic reduction process on the integrated gasification combined cycle (IGCC) system in this work. Transition metal supported catalysts and mixed metal oxide catalysts were used for the $SO_2$ catalytic reduction. The mechanism of COS produced from the $SO_2$ reduction and the COS concentration s according to the reaction temperature were investigated. In this study, an activated carbon and a modified activated carbon doped with KOH were used to remove the very low concentration of COS effectively. The adsorption rate and the breakthrough time of COS were measured by a thermo gravity analyzer (TGA, Cahn Balance) and a fixed bed flow reactor equipped with GC-pulsed flammable photometric detector (PFPD), respectively. It was confirmed that the COS breakthrough time of the activated carbon doped with KOH was longer than that of an activated carbon. In conclusion, the modified-activated carbon having a high surface area showed a high adsorption rate of COS produced from the $SO_2$ reduction.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.417-422
• /
• 2003

The objective of this study was to assess the regime of heat shock protein and leaf temperature caused by high temperature stress in chinese cabbage grown in alpine region. In monsoon period, high temperature and heavy rain have caused a stress condition for the cultured higher plants. Chinese cabbages were grown in different altitude, i.e. 600 m and 1,100 m. It was demonstrated that heat shock protein (Hsp 90) in alpine chinese cabbage leaf was actively expressed by high temperature and surplus nitrogen application. As a results of thermo-graphically observed leaf temperatures, chinese cabbage grown in high altitude region were ranged from 20.5 to $24.3^{\circ}C$ while in low altitude from 24.0 to $31.5^{\circ}C$. Furthermore, analysis of assimilated nutrients indicated that total nitrogen content was higher in plant grown under high temperature than under low temperature.

• Korean Journal of Clinical Laboratory Science
• /
• v.45 no.1
• /
• pp.37-42
• /
• 2013

The cells are concentrated approximately 20-fold by cytocentrifugation. This study evaluated the nucleated cell number for cells recovered on slide by using Cytospin-3 (Thermo Shandon Ltd. UK) and Cytopro-7620 (Wescor Inc., USA) cytocentrifuges to hematocytometer cell count of $0{\sim}5WBCs/{\mu}L$ of hematocytometer in the cerebrospinal fluid cell count. One hundred forty eight samples of $0{\sim}5WBCs/{\mu}L$ on hematocytometer, were cytocentrifuged by Cytospin-3 and Cytopro-7620 instruments. The nucleated cell number for cells recovered on slide was counted after Wright stain. The nucleated cell number for cells recovered on slide was 0~40 cells in the 44 samples of $0WBC/{\mu}L$, and 3~95 cells in the 31 samples of $1WBC/{\mu}L$. It was observed that the nucleated cell number for cells recovered on slide was 13~100 cells in the 44 samples of $2WBCs/{\mu}L$, and more than 100 cells in the 29 samples of $3{\sim}5WBCs/{\mu}L$, respectively. In addition, extremely normal lymphocyte, monocyte and polymorphonuclear neutrophil were observed in the 143 samples of $0{\sim}5WBCs/{\mu}L$. Macrophage and eosinophil were also rarely observed. The nucleated cell number for cells recovered on slide was 20 cells, which were regarded as $1WBC/{\mu}L$ in body fluid cell count. However, in this study, we made alterations to report nucleated cell percentage as 0% without preparing the cytocentrifuged slide at $0WBC/{\mu}L$ by using the cell yield in a comparison between the value of $0{\sim}5WBCs/{\mu}L$ and nucleated cell number for cells recovered on slide.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.139-144
• /
• 2007

Radiotherapy which is the most effective for orbit lymphoma has been used increasingly due to the increase of orbit or ocular adnexal tumor patients. Curative effects and convalescence have been being more satisfied thanks to remarkable development of cancer chemotherapy and medical treatments, but side effects such as cataract, dry eye and retinopathy still break out. Thus, in this study, a Lens Shielding Device (LSD hereafter) was designed to prevent occurring of cataract due to radiation therapy for orbit lymphoma and its efficacy through dosimetry were evaluated. And in this paper, its manufacturing process was also explained. LSD is composed of a cover body covering the lens and a side fixing part supporting the cover body. To measure radiation, the patient therapy conditions were simulated and the measurement of the radiation was conducted with Thermo Luminescence Detector (TLD) and Markus chamber. The average TLD value was 5.7% and the TLD value and Markus chamber value were acquired as 4.2% and 5.1% respectively at 6 mm depth where zero lens center was located. Only 1.5Gy ($300Gy{\times}\;5%$) or 5% of total 30Gy with 9 MeV electron beam is estimated to affect on patient's lens. That is smaller dose than the threshold value of cataract (2GY) or the value (5Gy) that was reported to cause cataract in clinical conditions. Thus, these findings suggest that LSD be very useful for prevention of cataract during radiotherapy for malignant lymphoma of orbit and ocular adnexa. Furthermore, it might be possible to reduce patient's discomfort caused by alien substances and to make it easier to fix the device with customized manufacturing manners.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.231-237
• /
• 2014

The supercritical fluids (SCFs) have been widely used for material synthesis and processing due to their remarkable properties including low viscosity, high diffusivity and low surface tension. Carbon dioxide is one of the suitable solvents in SCFs processes in terms of its advantages such as easy processibility (with low critical temperature and pressure), inexpensive, nonflammable, nontoxic, and readily available. However, it has generally low solubility for high molecular weight polymers with the exception of fluoropolymers and siloxane polymers. Therefore, hydrocarbon solvents and hydrochlorofluorocarbons have been used for various SCFs process by its high solubility for high molecular weight polymers. In this report, a PMMA/clay nanocomposites were fabricated by using supercritical fluid process. The $Na^+$-MMT(montmorillonites)was modified by a fluorinated surfactant which is able to enhance compatibility with the chlorodifluoromethane(HCFC-22) and thus, improve dispersability of the clay in the polymer matrix. The PMMA/fluorinated surfactant modified clay nanocomposite shows enhanced mechanical and thermal properties which characterized by X-raydiffraction(XRD), Thermo gravimetric analysis(TGA), Dynamic mechanical analysis (DMA) and Transmission electron microscopy (TEM).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.817-822
• /
• 2017

The braking system is one of the most important components in vehicles and machines. It must exert a reliable braking force when they are brought to a halt. Generally, frictional heat is generated by converting kinetic energy into heat energy through friction. As the kinetic energy is converted into heat energy, high temperature heat is generated which affects the mechanical behavior of the braking system. Frictional heat affects the thermal expansion and friction coefficient of the brake system. If the temperature is not controlled, the brake performance will be decreased. Therefore, it is important to predict and control the heat generation of the brake. Various numerical analysis studies have been carried out to predict the frictional heat, but they assumed the existence of boundary conditions in the numerical analysis to simulate the frictional heat, because the simulation of frictional heat is difficult and time consuming. The results were based on the assumption that the frictional heat is different from the actual temperature distribution in a rotating brake system. Therefore, the reliability of the cooling effect or thermal stress using the results of these studies is insufficient. In order to overcome these limitations and establish a simulation procedure to predict the frictional heat, this study directly simulates the frictional heat generation by using a thermal-structure coupling element. In this study, we analyzed the thermo-mechanical behavior of a brake model, in order to investigate the thermal characteristics of brake systems by using the Finite Element method (FEM). This study suggests the necessity to directly simulate the frictional heating and it is hoped that it can provide the necessary information for simulations.