• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1874-1889
• /
• 2022

In this study, we evaluate the thermal-hydraulic performance and economics of Printed Circuit Heat Exchanger (PCHE) according to the channel types and associated shape variables for the design of recuperators with Sodium-cooled Fast Reactors (SFRs). To perform the evaluations with variables such as the Reynolds number, channel types, tube diameter, and shape variables, a code for the heat exchanger is developed and verified through a comparison with experimental results. Based on the code, the volume and pressure drop are calculated, and an economic assessment is conducted. The zigzag type, which has bending angle of 80° and a tube diameter of 1.9 mm, is the most economical channel type in a SFR using CO₂ as the working fluid. For a SFR using N₂, we recommend the airfoil type with vertical and horizontal numbers of 1.6 and 1.1, respectively. The airfoil type is superior when the mass flow rate is large because the operating cost changes significantly. When the mass flow rate is small, volume is a more important design parameter, therefore, the zigzag type is suitable. In addition, we conduct a sensitivity analysis based on the production cost of the PCHE to identify changes in optimal channel types.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.23-28
• /
• 1996

The potential for the RELAP5/MOD3.2 was assessed for the loss-of-RHR event during the mid-loop operation and the predictability of major thermal-hydraulic phenomena was also evaluated for the long term transient. The analysis results of the typical two cases(cold leg opening case and pressurizer opening case) were compared with experimental data which was conducted at ROSA-IV/LSTF in Japan. As a result, it was shown that tile code was capable of simulating the thermal-hydraulic transport process with appropriate time step during the reduced inventory operation with the loss-of- RHR system.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.522-531
• /
• 2002

In order to study the thermal-hydraulic behavior of the cable-in-conduit-conductor (CICC), a numerical model has been developed. In the model, the high heat transfer approximation between superconducting strands and supercritical helium is adopted. The strong coupling of heat transfer at the front of normal zone generates a contact discontinuity in temperature and density. In order to obtain the converged numerical solutions, a moving mesh method is used to capture the contact discontinuity in the short front region of the normal zone. The coupled equation is solved using the finite element method with the artificial viscosity term. Details of the numerical implementation are discussed and the validation of the code is performed for comparison of the results with thse of GANDALF and QSAIT.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.284-292
• /
• 2015

A numerical calculation with the commercial computational fluid dynamics code CFX-14.0 was conducted for a test facility simulating the Canadian deuterium uranium moderator thermal-hydraulic. Two kinds of moderator thermal-hydraulic tests at Stern Laboratories Inc. were performed in the full geometric configuration of the Canadian deuterium uranium moderator circulating vessel, which is called a calandria tank, housing a matrix of horizontal rod bundles simulating calandria tubes. The first of these tests is the pressure drop measurement of a cross flow in the horizontal rod bundles. The other is the local temperature measurement on the cross section of the horizontal cylinder vessel simulating the calandria system. In the present study, the full geometric details of the calandria tank are incorporated in the grid generation of the computational domain to which the boundary conditions for each experiment are applied. The numerical solutions are reviewed and compared with the available test data.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.426-441
• /
• 2003

A reactor inlet header break experiment, B9401, performed in the RD-14M multi channel test facility was analyzed using RELAP5/MOD3.2 and RELAP5/CANDU[1]. The RELAP5 has been developed for the use in the analysis of the transient behavior of the pressurized water reactor. A recent study showed that the RELAP5 could be feasible even for the simulation of the thermal hydraulic behavior of CANDU reactors. However, some deficiencies in the prediction of fuel sheath temperature and transient behavior in athe headers were identified in the RELAP5 assessments. The RELAP5/CANDU has been developing to resolve the deficiencies in the RELAP5 and to improve the predictability of the thermal-hydraulic behaviors of the CANDU reactors. In the RELAP5/CANDU, critical heat flux model, horizontal flow regime map, heat transfer model in horizontal channel, etc. were modified or added to the RELAP5/MOD3.2. This study aims to identify the applicability of both codes, in particular, in the multi-channel simulation of the CANDU reactors. The RELAP5/MOD3.2 and the RELAP5/CANDU analyses demonstrate the code's capability to predict reasonably the major phenomena occurred during the transient. The thermal-hydraulic behaviors of both codes are almost identical, however, the RELAP5/CANDU predicts better the heater sheath temperature than the RELAP5/MOD3.2. Pressure differences between headers govern the flow characteristics through the heated sections, particularly after the ECI. In determining header pressure, there are many uncertainties arisen from the complicated effects including steady state pressure distribution. Therefore, it would be concluded that further works are required to reduce these uncertainties, and consequently predict appropriately thermal-hydraulic behaviors in the reactor coolant system during LOCA analyses.

• 에너지공학
• /
• 제13권1호
• /
• pp.51-59
• /
• 2004

국내에 설치 운영중인 원전 훈련용 시뮬레이터의 핵 증기공급 계통 열수력 프로그램은 1980련 전후에 외국 벤더들이 개발하여 공급한 것으로 이들 열수력 프로그램은 핵 증기공급 계통 열수력 현상을 실시간으로 모의하기 위해 과도하게 단순화된 모델을 채택하고 있다. 그 결과 원자로 냉각계통에 복잡한 이상유동이 발생하는 사고를 모의하는 경우 정확도가 떨어질 수 있어 부정적인 훈련(Negative training)을 초래할 가능성이 있다. 이와같은 문제를 해결하기 위해 전력연구원에서는 RETRAN-3D코드를 기본으로 시뮬레이터용 핵 증기공급 계통 열수력 프로그램 ARTS코드를 개발하였다. RETRAN-3D코드를 기본으로 하는 ARTS코드는 거의 대부분의 사고를 실시간으로 모의할 수 있으며 계산의 건전성도 보장된다. 그러나, 대형냉각재 상실사고나 저압 저유속 상태의 장기 과도현상 등을 모의하는 경우에 발생하는 계산실패나 실시간 계산 지체등의 가능성이 있다. 이 경우 이를 자동으로 대체 보완할 수 있는 보조계산체계를 개발했다. 특히, ARTS코드의 실시간 계산 및 건전성 문제가 예상되는 대형냉각재 상실사고를 주모의 대상으로 간주했다. 계산 결과는 코드의 정확도, 실시간 계산능력, 건전성 및 운전원 교육등에서 최종안정성평가보고서 및 ANSI/ANS-3.5-1998$^{[1]}$ 시뮬레이터 소프트웨어 기준을 만족하는 것으로 평가되었다

• Nuclear Engineering and Technology
• /
• 제22권1호
• /
• pp.12-19
• /
• 1990

1981년 6월 9일 고리 1호기 원자력발전소에서 발생한 외부 전원 상실사고 자료를 근거로 RELAP5/MOD2코드모델 평가를 하였다. 계산된 주요 열ㆍ수력학 변수를 실측자료와 비교 분석하였으며 증기발생기의 Nodalization 민감도 분석이 수행되었다. 계산된 열ㆍ수력학 변수는 실측치와 비교적 잘 일치하고 있으며, 이러한 유형의 사고 분석에 RELAP5/MOD2가 적합하다는 것을 보였다. 그러나 가압기 압력과 수위변동에서는 상당한 차이를 보였으며 높게 계산되었다. 이러한 사실은 RELAP5의 수직관에서의 층류 열전달 모델에 기인하는 것으로 해당모델의 개선을 요하고 있다는 것을 알았다. 그리고 증기발생기의 Nodalization 연구를 통하여 수위변동을 잘 예측하기 1위해서는 증기발생기 증기 Dome와 Downcomer사이에 압력을 전달시켜주는 유로를 모델링 하여야 한다는 것을 알았다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1540-1555
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect its stress conditions, mechanical behavior and thermal-hydraulic performance. A reliable numerical method is of great importance to reveal the complex evolution of mechanical deformation, flow redistribution and temperature field for the plate-type fuel assembly under non-uniform irradiation. This paper is the first part of a two-part study developing the numerical methodology for the thermal-fluid-structure coupling behaviors of plate-type fuel assembly under irradiation. In this paper, the thermal-fluid-structure coupling methodology has been developed for plate-type fuel assembly under non-uniform irradiation condition by exchanging thermal-hydraulic and mechanical deformation parameters between Finite Element Model (FEM) software and Computational Fluid Dynamic (CFD) software with Mesh-based parallel Code Coupling Interface (MpCCI), which has been validated with experimental results. Based on the established methodology, the effects of non-uniform irradiation and fluid were discussed, which demonstrated that the maximum mechanical deformation with irradiation was dozens of times larger than that without irradiation and the hydraulic load on fuel plates due to differential pressure played a dominant role in the mechanical deformation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.103-106
• /
• 2002

This paper presents an effective numerical method for analyzing three-dimensional unsteady conjugate heat transfer problems of a curved pipe subjected to infernally thermal stratification. In the present numerical analyses, the thermally stratified flows in the pipe are simulated using the standard $k-{\varepsilon}$turbulent model and the unsteady conjugate heat transfer is treated numerically with a simple and convenient numerical technique. The unsteady conjugate heat transfer analysis method is implemented in a finite volume thermal-hydraulic computer code based on a non-staggered grid arrangement, SIMPLEC algorithm and higher-order bounded convection scheme. Numerical calculations have been performed far the two cases of thermally stratified pipe flows where the surging directions are opposite each other i.e. In-surge and out-surge. The results show that the present numerical analysis method is effective to solve the unsteady flow and conjugate heat transfer in a curved pipe subjected to infernally thermal stratification.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.518-531
• /
• 1995

단일수로 해석 모형을 다수로 해석 모형으로 대체할 경우 얻을 수 있는 열적 여유도 향상에 대한 연구를 수행하였다. 이를 위하여 17$\times$17 국산핵 연료 장전 노심에 적용할 수 있는 새로운 임계열속 상관식을 개발하였으며, 여기에 사용된 부수로 국부 조건은 다수로 해석 코드인 TORC로 계산하였다. 그리고, 고온부구로 DNBR 분석을 위하여 전 노심에 대한 단일단계 해석 모형을 개발하였다. 분석 결과 다수로 해석 모형인 TORC/KRB-1 체제를 사용할 경우 단일수로 해석 모형인 PUMA/ERB-2 체제에 비하여 약 5% 이상의 열적 여유도를 회복할 수 있는 것으로 나타났다. 이러한 열적 여유도의 증가는 두 코드간의 고온부수로 국부조건 예측 성능 차이와 임계열속 상관식의 특성 차이에서 기인한 것이다.