• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.489-497
• /
• 2020

The Li-ion battery is considered to be one of the potential power sources for electric vehicles. In fact, the efficiency, reliability, and cycle life of Li-ion batteries are highly influenced by their thermal conditions. Therefore, a novel thermal management system is highly required to simultaneously achieve high performance and long life of the battery pack. Basically, thermal modeling is a key issue for the novel thermal management of Li-ion battery systems. In this paper, as a basic study for battery thermal modeling, temperature distributions inside the simple Li-ion battery pack (comprises of nine 18650 Li-ion batteries) under a 1C discharging condition were investigated using measurement and computational fluid dynamics (CFD) simulation approaches. The heat flux boundary conditions of battery cells for the CFD thermal analysis of battery pack were provided by the measurement of single battery cell temperature. The temperature distribution inside the battery pack were compared at six monitoring locations. Results show that the accurate estimation of heat flux at the surface of single cylindrical battery is paramount to the prediction of temperature distributions inside the Li-ion battery under various discharging conditions (C-rates). It is considered that the research approach for the estimation of temperature distribution used in this study can be used as a basic tool to understand the thermal behavior of Li-ion battery pack for the construction of effective battery thermal management systems.

• 신재생에너지
• /
• 제10권4호
• /
• pp.36-46
• /
• 2014

Low-grade heats are wasted even though an amount of their energy is huge. In the small and medium industrial complex sites, large amount of low-grade thermal energy generated during the manufacturing process is wasted if it is not used directly for building heating or air-conditioning. In order to utilize this waste thermal energy more efficiently, organic Rankine cycle (ORC) was adopted. The range of operating temperature of ORC was set to $60^{\circ}C$ from $30^{\circ}C$ applicable low-temperature waste heat. A study was conducted to select an appropriate organic working fluid based on these operating conditions. More than 60 working fluids were screened. Eleven working fluids were selected based on the requirements as working fluid for ORC such as environmentally friendly, safety, and good operation on the expander. Finally, six working fluids were selected by considering the operating temperature ranges. Then, a cycle analysis was conducted with these six working fluids. As a results, R-245fa and R-134a appeared as appropriate working fluids for ORC operating at low-temperature condition based on the system efficiency and the turbine output power.

• 대한물리치료과학회지
• /
• 제9권2호
• /
• pp.151-157
• /
• 2002

This study examined the changes in body temperature through conductive heat applied to the body and clarified the influences of body fluid on the thermal effects. Body fluid was measured using the Segmental Bioelectrical Impedance Analysis method. The subjects consisted of 13 men and 14 women. TBW was 37.56 (4.35 L for men and 29.93 (3.12 L for women, with the former being significantly (p<0.01) higher. The amount of body fluid in the right and left legs was 6.46 (0.83 L and 6.39 (0.86 L for men and 4.78 (0.49 L and 4.78 (0.49 L for women, respectively, with men's values being significantly (p<0.01) higher than women's on both the right and left sides. The maximal change in the surface temperature was 33.93 (0.61(C at the start of a warm bath to 3407 (0.61(C after 14 min for men. In contrast, the maximal change was 33.38 (0.99(C at the start to 33.73 (0.86(C after 18 min for women. For the other sites, the maximal temperature in Depths 1 and 2 was attained earlier for men than for women. The decrease in body temperature after the end of warming was more remarkable for men. Men had fluid with a higher conductivity than women, indicating influences of body fluid on the changes in body temperature. There were few changes in body composition with a partial bath having a crossed effect, indicating that this is a safe therapeutic method for elderly people.

• 한국지반공학회논문집
• /
• 제28권12호
• /
• pp.5-15
• /
• 2012

본 연구에서는 일련의 현장 열응답 시험결과를 동일한 지중열교환기와 지반 조건에 대한 CFD(Computational Fluid Dynamics) 수치해석 결과와 비교하고 역해석을 통해 지반의 열전도도를 평가하였다. 총 6개의 보어홀을 원주에 소재하고 있는 시험시공 현장에 설치하였으며 순환 파이프의 형상과 그라우트 재료에 대한 수직 밀폐형 지중열교환기의 성능을 비교하기 위해 일반적인 U형 순환 파이프와 새롭게 개발된 3공형 순환 파이프를 보어홀 내 시공하였다. 수치해석은 CFD 해석 프로그램인 FLUENT를 적용하여 3차원 열전달 거동 해석을 수행하였으며 각각의 보어홀에 대해 시간에 따른 순환수의 유입, 유출 온도 차이와 지반의 깊이별 온도변화를 User Define Function (UDF)을 이용하여 실제 조건을 모사하였다. 주어진 보어홀 조건과 실내시험을 통해 시험시공 현장의 열 물성을 입력치로 적용하여 수치 해석을 수행하였으며, 현장 열응답 시험에서 측정된 시간에 따른 유입, 유출 순환수의 온도 변화를 모사하였다. 수치해석 결과, 지반의 열전도도를 3W/mK로 적용하였을 때 보다 4W/mK일 때 현장 열응답 시험과 유사한 결과를 얻었다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1556-1568
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect stress conditions, mechanical behaviors and thermal-hydraulic performance of the fuel assembly. This paper is the Part II work of a two-part study devoted to analyzing the complex unique mechanical deformation and thermal-hydraulic characteristics for the typical plate-type fuel assembly under irradiation effect, which is on the basis of developed and verified numerical thermal-fluid-structure coupling methodology under irradiation in Part I of this work. The mechanical deformation, thermal-hydraulic performance and Mises stress have been analyzed for the typical plate-type fuel assembly consisting of support plates under non-uniform irradiation. It was interesting to observe that: the plate-type fuel assembly including the fuel plates and support plates tended to bend towards the location with maximum fission rate; the hot spots in the fuel foil appeared at the location with maximum thickness increment; the maximum Mises stress of fuel foil was located at the adjacent location with the maximum plate thickness increment et al.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.513-514
• /
• 2006

A CFD analysis for a thermal mixing experiment during steam jet discharge was performed to develop the analysis methodology for the thermal mixing between steam and subcooled water and to find the optimized numerical method. In the CFD analysis, the steam condensation phenomena by a direct contact was modelled by the so-called condensation region model. The comparison of the CFD results with the test data showed a good agreement as a whole, but a small temperature difference was locally found at some locations. However, the commercial CFD code of CFX4.4 together with the condensation region model can simulate the thermal mixing behaviour reasonably well when a sufficient number of mesh distribution and a proper numerical method are adopted

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.122-129
• /
• 2004

Finite element analysis was performed to analyze structural safety of a new heavy-duty direct injection diesel engine. A half section of the in-line 6-cylinder engine was selected as a computational domain. A mapping method was used to project heat transfer coefficients from CFD results of engine coolant flow onto the FE model. The accurate setting of thermal boundary condition on the FE model was expected to result in improved prediction of temperature, cylinder bore distortion, and stresses. Characteristics of high cycle fatigue were investigated by assuming the engine was operated under the following five loading conditions repeatedly; assembly force, assembly force with thermal loading, alternating maximum gas pressure loading at each cylinder combined with assembly force and thermal loading. Distribution of fatigue safety factor was calculated by using it Haigh diagram in which the maximum and the minimum stresses were selected from the five loading cases.

• 한국산학기술학회논문지
• /
• 제5권5호
• /
• pp.371-376
• /
• 2004

본 논문은 열평형 기술을 활용하여 다단계 조절이 가능한 유니베이커 오븐에 대하여 CFD(computational fluid dynamics) 해석을 수행하여 오븐내부의 열유동분포와 속도를 파악함으로서 오븐 내부의 열평형을 이룰 수 있는 최적 위치를 예상함으로서 유니베이커 오븐의 설계 자료로 이용하고자 한다.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.14-20
• /
• 2015

Without electirc power to cool down the hot reactor core, passive systems utilizing natural circulation are becoming a big specialty of recent neculear systems after the severe accident in Fukusima. When we consider the natural circulation in a pool, thermal mixing phenomena may start from single phase circulation and can continue to two phase condition. Since the CUPID code, which has been developed for two-phase flow analysis, can deal with the phase transition phenomena, the CUPID would be pertinent to natural convection problems in single- and two-phase conditions. Thus, the CUPID should be validated against single- and two-phase natural circulation phenomena. For the first step of the validation process, this study is focused on the validation of single-phase natural circulation. Moreover, the CUPID code solves the fluid properties by the relationship to pressure and temperature from the steam table considering non-condensable gas effects, so that the effects from variable properties are included. Simple square thermal cavity problems are tested for laminar and turbulent conditions against numerical and experimental data. Throughout the investigation, it is found that the variable properties can affect the flow field in laminar condition, but the effect becomes weak in turbulence condition, and the CUPID code implementing steam table is capable of analyzing single phase natural circualtion phenomena.

• Advances in nano research
• /
• 제16권4호
• /
• pp.341-352
• /
• 2024

This study investigates the heat and mass transfer characteristics of a MoS₂ nanoparticle suspension in ethylene glycol over a porous stretching sheet. MoS₂ nanoparticles are known for their exceptional thermal and chemical stability which makes it convenient for enhancing the energy and mass transport properties of base fluids. Ethylene glycol, a common coolant in various industrial applications is utilized as the suspending medium due to its superior heat transfer properties. The effects of variable thermal conductivity, variable mass diffusivity, thermal radiation and thermophoresis which are crucial parameters in affecting the transport phenomena of nanofluids are taken into consideration. The governing partial differential equations representing the conservation of momentum, energy, and concentration are reduced to a set of nonlinear ordinary differential equations using appropriate similarity transformations. R software and MATLAB-bvp5c are used to compute the solutions. The impact of key parameters, including the nanoparticle volume fraction, magnetic field, Prandtl number, and thermophoresis parameter on the flow, heat and mass transfer rates is systematically examined. The study reveals that the presence of MoS₂ nanoparticles curbs the friction between the fluid and the solid boundary. Moreover, the variable thermal conductivity controls the rate of heat transfer and variable mass diffusivity regulates the rate of mass transfer. The numerical and statistical results computed are mutually justified via tables. The results obtained from this investigation provide valuable insights into the design and optimization of systems involving nanofluid-based heat and mass transfer processes, such as solar collectors, chemical reactors, and heat exchangers. Furthermore, the findings contribute to a deeper understanding of stretching sheet systems, such as in manufacturing processes involving continuous casting or polymer film production. The incorporation of MoS₂-C₂H₆O₂ nanofluids can potentially optimize temperature distribution and fluid dynamics.