• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.70-77
• /
• 2013

Recently the radiant panel heating and cooling system has been regarded as an alternative of low temperature heating and high temperature cooling by applying the renewable energy sources to the heating and cooling of buildings. Especially this system can be used as HVAC system alternatives in super high-rise buildings for energy saving and thermal comfort. Also it can be possible to reduce the plenum space because the minimum ventilation air will be supplied into the space. This study focused on the evaluation the basic characteristics of thermal output in prefabricated steel wall panel system for radiant heating and cooling. In order to evaluate the thermal output according to both various supply water temperatures and supply water flow rates, three-dimensional dynamic heat transfer analysis was performed. As results, for the heating mode, thermal output increased by 26% with the supply temperature increasing by $5^{\circ}C$. The surface temperature of panels range within $1{\sim}3^{\circ}C$. For the cooling mode, thermal output decreased by 18.2% with the supply temperature increasing by $2^{\circ}C$. The surface temperature of panels range within $0.5{\sim}1^{\circ}C$ and it was shown the even temperature distribution.

• Fashion & Textile Research Journal
• /
• v.1 no.2
• /
• pp.160-165
• /
• 1999

The thermal properies of the pure linen fabrics available in the market and linen blended woven fabrics were measured at the moisture content of 0%, 20%, 40% and 60% using KES-F7 system (Thermo Iabo II type). The experimental properties were statistically analyzed by the rate of water absorbent. The main results were as follows; There is a positive correlation between the thermal insulation value (TIV) and thickness of pure linen fabrics and linen blended woven fabrics by water absorption. Whereas an negative correlation exists between the TIV and cover factor. There is a high positive correlation among the thermal conductivity (k), thickness and weight of pure linen fabrics and linen blended woven fabrics by water absorption. Wherase a high negative correlation exist between the k and air' permeability (Ap). There is a high positive correlation between the feeling of warmth/coldness and bulk density of pure linen and linen blended woven fabrics by water absorption. Wherase a high negative correlation exists between the feeling of warmth/coldness and porosity. There is a negative correlation between TIV and $q_{max}$ of pure linen fabrics and linen blended woven fabrics. The higher the rate of water absorbent, the lower the TIV. This means that TIV decreases by water absorption. As for the thermal property by rate of water absorbent $q_{max}$ and k increase by water absorption and reach max-value at 60% rate of water absorbent. The TIV decreases by water absorption and has +value at 0% rate of water absorbent, whereas it has -value with a feeling of coldness at 20%, 40%. and 60% rate of water absorbent.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.45-55
• /
• 2003

This study was performed to find ways to improve the wearing comfort of high school boys' summer uniforms. The subjects were 640 boy students of high schools in Cheongju and Ansung city. The data was collected self-administered questionnaires to measure the actual wearing condition and the wearing satisfaction. Factor analysis, t-test, and F-test were used for data analysis. The results were as fellows: 1) Most students were wearing shirts made of polyester/rayon blended fabrics and pants made of wool/polyester blended fabrics. 2) Most students were wearing round neckline T-shirts or running shirts as underwears of the shirts, and trunks as pants. 3) About a half of respondents had altered their summer uniforms, and main alteration of their uniforms was focused on making their pants narrow. 4) The wearing satisfaction of uniforms were classifies into three factors: aesthetic, moving function, thermal comfort wearing sensation. 5) They evaluated the wearing sensation of school uniforms of shirts and pants with low satisfaction. 6) There were partially significant differences in three factors of the wearing satisfaction according to the uniform's fabrics, the wearing of underwear and the alteration of uniform.

• The Korean Journal of Community Living Science
• /
• v.18 no.1
• /
• pp.39-53
• /
• 2007

The purpose of this study was to determine the characteristics of an experimental protective clothing material with regard to comfort and isolation from the hazardous heavy metals produced in municipal waste incineration. An analysis was conducted on the total concentrations of heavy metals in some parts such as surface, middle layer, and interior for the treated fabric, and the untreated one, and working clothes. We conclude that the processed fabric with charcoal for working clothes showed the least exposure to heavy metals of the three. Working clothes worn by workers during waste incineration were much more contaminated than the untreated and treated materials. The material of working clothes could be chosen according to the function with regard to its original chemical characteristics, which are the proper results of the dyeing process. The processed fabric material has high degrees of moisture regain, thermal insulation, water vapor penetration, and antibacterial function; consequently, it is much more comfortable to wear. The fabric material proposed in this research contributed much more to blocking heavy metal concentrations (such as Cd, Pb, Cu, Cr, Zn, Mn) than did the fabric of working clothes at present. Consequently, we strongly suggest that the material of working clothes be upgraded by adopting the above-mentioned charcoal-processed fabric. Materials of working clothes must be improved to increase comfort and prevent harmful gas, flying dust, and heavy metals from permeating the fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1115-1124
• /
• 2000

The purpose of this study was 1) to determine physical properties, and subjective evaluation of sensation of sports socks with various type of fiber content and fabric structure, and 2) to develop regression equations for predicting each sensation from physical properties of socks. Thirty healthy male students participated in the wear test with ten replications. The ANOVA, Duncans multiple test, and multiple regression, and paired-t test were used in the statistical analysis, using an SAS package. The results of this study are as follows: 1. 100% cotton socks had higher absorbency and wickability among five different socks. Comfort sensation, tactile sensation and fit sensation of socks were significantly influenced by types of fiber content. People felt that polypropylene socks were less comfortable & slightly tighter, and cotton socks were drier than the other socks. Terry socks were warmer than single jersey socks. 2. The results of the regression analysis showed that tactile sensation of socks after exercise can be predicted from the cube of moisture permeability($R^2$=0.99), and fit sensation can be predicted from drop absorbency, moisture permeability, wickability in wale and weight($R^2$=-0.98).

• Journal of Korea Multimedia Society
• /
• v.10 no.6
• /
• pp.786-798
• /
• 2007

As we go about our daily lives, people often collect surrounding information and adapt to the situation. Computer development trends show that one wants computers to work like human beings, i.e. computers can sense its context and adapt corresponding to context changes. To implement this expectation, a context aware service layer is needed. In this layer, sensors capture its environment and send this information to the service center. Considering received information as its context, the service center seeks the suitable operation according to the context. Tills paper presents a context aware service which is applied in controlling air-conditioner. The air-conditioner includes sensors which are installed at some special positions in a room. Each of these sensors gathers comfort-influenced information like temperature, humidity and sends them to air-conditioner. The air-conditioner adapts its operation to the environment according to the sensed information. To control the air-conditioner effectively, we use a genetic algorithm which is suitable in adaptation issues. The simulation shows that the room condition can be maintained at a comfortable level by using context-aware services in the operation of the air-conditioning system.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.96-102
• /
• 2012

The minimum airflow of VAV terminal boxes is a key factor for comfort, indoor air quality(IAQ) and energy cost. If the minimum airflow is not reasonable, it would waste energy and make IAQ problems. There are two types of VAV terminal box control logic. One is the single maximum, another is the dual maximum control logic. Dual maximum control logic is more efficiency way to reduce the energy consumption. It has a minimum airflow set point and a heating maximum set point. It allows the minimum airflow set point to be much lower than single maximum control logic. A building simulation was conducted to evaluate the energy consumption and the IAQ according to the control logic of the V AV terminal box. In the simulation, dual maximum control logic can save the energy up to 6.5% compared to the single maximum control logic.

• International Journal of High-Rise Buildings
• /
• v.5 no.2
• /
• pp.87-94
• /
• 2016

High-rise as a building typology is gaining popularity in Asian mega-cities, due to its advantages in increasing volumetric density with limited land resources. Numerous factors contribute to the formation of high-rise urban form, from economical and institutional, environmental to socio-political. Environmental concerns over the impact of rapid urbanization in developing economies demand new thought on the link between urban environment and urban form. Outdoor and indoor climate, pedestrian comfort, and building energy consumption are all related to and impacted by urban form and building morphology. There are many studies and practices on designing individual "green" high-rise buildings, but far fewer studies on designing high-rise building clusters from the perspective of environmental performance optimization.. This paper focuses on the environmental perspective, and its correlation with the evolution of the high-rise urban form. Previous studies on urban morphology in terms of environmental and energy performance are reviewed. Studies on "parameterizing" urban morphology to estimate its environmental performance are reviewed, and the possible urban design implications of the study are demonstrated in by the author, by way of a microclimate map of the iconic Shanghai Xiao Lujiazui CBD. The study formulates the best-practice design guidelines for creating walkable and comfortable outdoor space in a high-rise urban setting, including proper sizing of street blocks and building footprint, provision of shading, and facilitating urban ventilation.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.130-138
• /
• 2005

Recently, as people are interested in the quality of life and well-being trend, the consumer's demand on a healthy residence is rapidly increasing. To offer heathy residential environment to consumers, it is necessary to investigate the quality of design regardings health. The purposes of this study are to arrange the elements of interior design for the healthy apartment and to present the essential points of design to make a proposal for the newly built healthy apartment. It is believed that the accumulated data will be the basic information to develop more healthy apartment in the future. Questionnaire was delivered and analyzed. Also, checklist were checked by visiting model house. Through the comparison and analysis between consumer's demand and the condition of the model house, this research suggests what the healthy apartment should be replenish. The result of this study are as following. In spite of the demand of improvement on sanitation, health diagnosis program, thermal comfort, sound comfort were high but the evaluation of the present apartments shows not that high. Consumer's demands like above are reflected on latest apartments but those are not reached enough to the consumer's demand.

• Fashion & Textile Research Journal
• /
• v.3 no.3
• /
• pp.265-270
• /
• 2001

Korea and Japan, neighboring two nations, have similar cultural background and complicated relations in terms of their culture and constitution. In this study, clothing microclimate and subjective sensation of Korean and Japanese subjects for Hanbok, traditional costumes of Korea, were assessed and investigated differences between them. The results of the study were as follows. For Hanbok, the temperature within clothing at the chest have significant correlations with the variables of race and elapsed time with p<0.001. At the thigh, correlations with elapsed time were significant (p<0.001). For the humidity within clothing at the chest of Hanbok, correlations with variables of race were significant (p<0.001). At the thigh, correlations with race and elapsed time were significant(p<0.001). For Hanbok, Korean group reported 'slightly warm' whereas Japanese group reported 'hot' in the thermal sensation. For the humid sensation, Korean group reported 'neutral' and Japanese group reported 'humid'. For the comfort sensation, Korean group reported 'slightly uncomfortable' and Japanese group reported 'uncomfortable'. Japanese group reported high relation with comfort sensation and humidity of microclimate.