• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1089-1093
• /
• 1994

Polyesters containing enaryloxynitriles moiety have been newly prepared from p-bis[1-[4-(3-hydroxypropyl)phenoxy]-2,2-dicyano vinyl]benzene (3) and common diols with terephthaloyl chloride. The copolyesters have a good solubility in common organic solvents as well as polar aprotic solvents. They undergo a curing reaction at around 350 $^{circ}C$ and show a 50-60${\%}$ of residual weight at 500 $^{circ}C$. The enhanced thermal stabilities were due to the intramolecular cyclization or intermolecular cross-linking reaction of the dicyanovinyl group incorporated into polyester by copolymerization.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1293-1302
• /
• 2018

Nanocrystalline (NC) Ni electrodeposits (EDs) with a mean grain size of $34{\pm}12nm$ has been investigated, from room temperature to $800^{\circ}C$ under a purge gas of argon, by both non-isothermal and isothermal differential scanning calorimetry measurements, in combination with characterization of temperature-dependent microstructural evolution. A significant exothermic peak resulting from superimposition of recrystallization and surface oxidation occurs between 340 and $745^{\circ}C$ at a heating rate of $10^{\circ}C/min$ for the NC Ni EDs. The temperatures for recrystallization and oxidation increase with increasing the heating rate. In addition, recrystallization leads to a profound brittle-ductile transition of the Ni EDs in a narrow range around the peak temperature for the recrystallization.

• 공업화학
• /
• 제26권1호
• /
• pp.23-28
• /
• 2015

옻나무에서 추출한 우루시올은 우수한 열안정상과 항균성을 나타내며, 이러한 특성을 기능성 패키징에 응용하기 위하여 폴리우루시올(YPUOH) 분말을 제조하였다. 제조한 YPUOH 분말과 저밀도 폴리에틸렌(LDPE)을 twin screw extruder system을 이용하여 다른 세 가지 조성의 LDPE/YPUOH 복합필름을 제조하였다. 기능성 패키징 소재로서의 응용 가능성을 알아보기 위하여 LDPE/YPUOH 복합필름에 대한 모폴로지, 열적 특성, 항균 특성, 배리어 특성을 조사하였다. LDPE와 YPUOH의 상호작용은 약하지만, 잘 분산된 복합필름 제조가 가능하였으며, YPUOH의 도입에 따라 열안정성은 증가하였다. YPUOH 분말의 우수한 항균특성은 제조한 LDPE/YPUOH의 복합필름에서도 E. coli에 대하여 99.9%의 우수한 항균활성(R)을 확인할 수 있었다. 또한, LDPE/YPUOH 복합필름의 수분에 대한 배리어 특성은 YPUOH의 함량이 증가함에 따라 향상되었으며, 이는 YPUOH가 수분에 대한 배리어성 필러로서 작용하며, 또한 복합필름의 표면 특성을 소수성으로 변화시켜주는 것에 기인한다. 저함량의 YPUOH 도입에 따른 LDPE의 내열성, 항균 특성, 수분에 대한 배리어 특성의 향상은 옻 추출물로 제조한 YPUOH가 패키징 소재의 기능성 필러로서 응용 가능성이 높다는 것을 의미한다.

• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.262-268
• /
• 2005

[ $Zn(BH_4)_2$ ](8.4 wt% theoretical hydrogen storage capacity powders have been successfully synthesized by mechanochemical reaction from mixtures of $ZnCl_2$ and $NaBH_4$ powders in a 1:2 molar ratio in different times. $$ZnCl_2+2NaBH_4{\rightarrow}Zn(BH_4)_2+2NaCl$$ (1) $Zn(BH_4)_2$ powders were characterized by X-ray diffractometry(XRD), and Furier Transform Infrared spectrometry(FT-IR). The thermal stabilities of $Zn(BH_4)_2$ powders were studied by Differential scanning calorimetry(DSC), Thermogravimetry analysis(TGA), and Mass spectrometry(MS). $Zn(BH_4)_2$ can be tested for hydrogen evolution without further purification. The reaction to yield hydrogen is irreversible, the other products being compounds of Zn, and borane. $Zn(BH_4)_2$ thermally decomposes to release borane and hydrogen gas between about 85 and 150$^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.4041-4048
• /
• 2011

High molecular weight tetrasulfonated poly(arylene biphenylsulfone ether) (TsPBPSEH) copolymers containing up to four pendant sulfonate groups per repeat unit were synthesized via aromatic nucleophilic displacement condensation from 4,4'-bis(4-chloro-3-sulfonatophenylsulfonyl)biphenyl-2,2'-disulfonate (SBCSBPD), 4,4'-dichlorodiphenylsulfone (DCDPS) and 4,4'-(hexafluoroisopropylidene)diphenol (6F-BPA). The synthesized copolymers were structurally characterized using $^1H$ NMR and FT-IR techniques. They were analytically pure, amorphous and were readily soluble in a wide range of organic solvents. Electrolyte membranes were successfully cast using the synthesized polymers with various sulfonation levels and N-methyl-2-pyrrolidinone. This new class of polymer membranes exhibited elevated thermal and physical stabilities and reduced swelling at high temperatures. An increase of acidic functional groups in the copolymer yielded high ion exchange capacity and moderate ionic conductivity values even at higher temperatures, which makes them potential ion conducting candidates.

• Corrosion Science and Technology
• /
• 제5권2호
• /
• pp.69-76
• /
• 2006

Premature cracking of the epoxy coatings applied on ship's ballast tanks(BT) can lead to damage of ship's hulls. To avoid this, it's important to have clear understanding of the underlying mechanism and primary factors of the coating crack. In this study, the efforts were made to clarify the integrated effects of main factors, i.e., initial coating shrinkage, thermally induced strain, steel-structural strain and the intrinsic coating flexibility at the initial and after aging, to the early cracking phenomena of epoxy coating in the ship's ballast tank. The coating crack is caused by combination of thermal stress, structural stress, and internal stresses which is closely related to chemical structures of the coatings. On the other hand, thermal stresses and dimensional stabilities would rarely play a major role in coating crack for ballast tank coatings with rather large flexibility. Crack resistance of the coatings at early stages can be estimated roughly by measuring internal stress, FT-IR and $T_g$ value of the coatings. A new screening test method was also proposed in this study, which can be possibly related to the long-term resistance of epoxy-based paints to cracking.

• 공업화학
• /
• 제4권3호
• /
• pp.488-496
• /
• 1993

천연 제올라이트는 공업적으로 그 용도가 매우 다양하여 최근에 연구의 초점이 되어왔다. 여러 종류의 국내산 천연 제올라이트 중에서 clinoptilolite는 가장 각광을 받는 천연 제올라이트 중의 하나이다. 그러나 clinoptilolite와 구조가 유사한 heulandite가 clinoptilolite와 공존할 가능성이 항상 내포되어 있다. 그러나 heulandite는 열적으로 매우 불안정하기 때문에 공업적으로 이용되는데 많은 제한을 받아왔다. 본 논문에서는 이온교환 및 열처리가 국내산 천연 제올라이트인 huelandite의 열적 안정성에 미치는 영향에 관하여 논하고자 한다. 2종류의 이온교환을 실시한 후 여러 온도에서 열처리를 수행하였다. X-ray, IR 및 AA 흡광 분석을 실시한 결과 $Na^+$이온으로 이온교환할 때 heulandite의 열적 안정성의 향상을 가져오는 것을 알 수 있었다.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.891-896
• /
• 2007

Waterborne polyurethane dispersions (WPUD) were prepared by poly(ethylene glycol) adipate as the polyester type, ${\alpha},{\omega}-hydroxyalkyl$ terminated polydimethylsiloxane (PDMS-diol) as the polysiloxane type, hexamethylene diisocyanate, and isophorone diisocyanate, dimethylol propionic acid. The effects of PDMS-diol contents on the particle size, thermal and surface properties of WPUD were investigated. The structures of the synthesized WPUD were confirmed using by FT-IR. The surface, thermal and mechanical properties were investigated by measuring the contact angles, DSC, TGA and UTM. As PDMS-diol contents increased, the particle size, the contact angle, and the elongation was increased, while the tensile strength was decreased. Also the thermal stabilities of the synthesised WPUD were increased as PDMS-diol contents increased.

• 공업화학
• /
• 제3권2호
• /
• pp.280-287
• /
• 1992

테레프탈산, 비페닐 디카르복시산과 히드로퀴논을 용액중합하여 전방향족 액정 폴리에스테르를 합성하고 테레프탈산과 비페닐 디카복시산의 몰비가 액정중합체의 열적성질, 열안정성 및 메소상의 구조에 미치는 영향을 DSC, TGA, 편광현미경 및 X선회절기로 조사하였다. 본 연구에서 합성한 중합체는 모두 열방성 액정중합체였고 네마틱 액정상을 나타내었으며, 용융온도 및 등방화온도는 중합체중의 비페닐렌구조가 증가함에 따라 약간씩 증가하였다. 또한 중합체의 열안정성은 중합체중의 비페닐렌구조가 증가함에 따라 개선되었으며, 비페닐렌구조를 가지는 중합체의 결정도는 상당히 높아서 약 33%정도로 나타났다.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.114-128
• /
• 2007

Polyimides are one of the most important classes of polymers used in the microelectronics and photoelectronics industries. Because of their high thermal stability, chemical resistance, and good mechanical and electric properties, polyimides are often applied in photoresists, passivation and dielectric films, soft print circuit boards, and alignment films within displays. Recently, fully aliphatic and alicyclic polyimides have found applications as optoelectronics and inter layer dielectric materials, due to their good transparencies and low dielectric constants $(\varepsilon)$. The low molecular density, polarity and rare probability of forming inter- or intra-molecular charge transfers, resulting in lowering of the dielectric constant and high transparency, are the most striking characteristics of aliphatic polyimide. However, the ultimate end use of polyimides derived from aliphatic monomers is in their targeted applications that need less stringent thermal requirements. Much research effort has been exerted in the development of aliphatic polyimide with increased thermal and mechanical stabilities, while maintaining their transparencies and low dielectric constants, by the incorporation of rigid moieties. In this article, the recent research process in synthesizing fully aliphatic polyimides, with improved dimensional stability, high transparency and low $\delta$values, as well as the characterizations and future scope for their application in micro electric and photo-electronic industries, is reviewed.