• 대한한방내과학회지
• /
• 제21권1호
• /
• pp.7-12
• /
• 2000

Objectives : This studies were performed to investigate the correlation between the treatment effects and the changes of the thermal differences at the pre and post-treatment by using the digital infrared computer thermographic imaging (D.I.T.I) to the irritable colon syndrome 30 patients. Methods : The extracts of the gwakhyangjunggisan were administerd to the patients by oral method three times per day during four weeks. we selected the Chung-Wan($CV_{12}$), Chunchu($S_{25}$). Hapkok($LI_4$), Naegwan($P_6$), Yongdo($H_4$) acupoints and treated the patients two times per week during four weeks. One week later, we investigated the changes of the pressure pain around left side Pokkyol($SP_{14}$), the symptoms. and the skin temperature changes on Pokkyol($SP_{14}$) and Kimun($LR_{14}$) around, by using the D.I.T.I. Results : In the correlation between the severity of the pressure pain around left side Pokkyol($SP_{14}$) and the thermal differences on Pokkyol($SP_{14}$) and Kimun($LR_{14}$) around, before the treatment, the more the pain was severe, the more the skin temperature was differential significantly. In the correlation between the severity of the symptoms and the thermal differences on Pokkyol($SP_{14}$) and Kimun($LR_{14}$) around, before the treatment, the more the symptom was severe, the more the skin temperature was differential significantly. In the changes of the pressure pain around left side of Pokkyol($SP_{14}$), the improved were significantly higher than the unimproved. In the changes of the symptoms, the improved were significantly higher than the unimproved. In the correlation between the changes of the pressure pain around left side Pokkyol($SP_{14}$) and the changes of the thermal differences at the pre and post- treatment, the more the pain was improved, the more the thermal change was widened significantly. In the correlation between the changes of the symptoms and the changes of thermal differences at the pre and post-treatment, the more the symptom was improved. the more the thermal change was widened significantly. Conclusions : Above the results, the treatments was effective and the digital infrared computer thermographic imaging (D.I.T.I) was useful to prove the improvements of the pressure pain and the symptom with the irritable bowel syndrome patients.

• 한국식품영양과학회지
• /
• 제43권12호
• /
• pp.1881-1888
• /
• 2014

본 연구는 당근을 열처리법 중에서 열수침지, 과열증기 및 볶음 처리에 따른 이화학적 및 영양학적 특성을 분석한 논문으로 열처리가 당근에 미치는 영향을 비교하고자 하였다. 상품을 구매할 때 1차적인 구매요소인 색도 및 경도 측정과 추가적으로 pH와 조직 관찰 결과로 최적 조건 선정 후 영양학적 및 관능검사를 실시하였다. 열처리를 하지 않은 대조구에 비해 짧은 시간의 열처리에서는 더 진하고 선명한 색을 띠었으나, 장시간 동안 처리한 열처리 시료는 색의 침착을 보였다. 원물과의 색은 열처리 후 차이를 나타냈지만 열수 및 과열증기 2분 처리까지가 원물과 가장 유사한 색을 나타냈으며, 경도는 열처리 시간에 따라 감소 경향을 나타냈고 볶음 처리는 짧은 시간으로도 물성이 연화됐으며, 열수침지 및 과열증기 처리는 2분까지 원물에 가까운 경도를 유지했으나 처리 시간이 길어질수록 경도가 확실히 감소하였다. 비타민, 유리당 및 유기산의 경우 열수침지 처리에서 가장 큰 손실을 보였고, 과열증기, 볶음 처리 순으로 손실된 결과를 보였다. 특히 유기산에서 succinic acid는 열수침지 처리 시 큰 손실률을 보이며 감소된 결과를 나타냈다. Peroxidase activity 변화는 열수침지 및 과열증기 처리에서 볶음 처리보다 높은 불활성화를 보였다. 당근의 열처리 조건은 과열증기 처리법으로 2분 동안 처리하는 것이 다른 처리법에서 처리한 시간들에 비해 최적으로 나타났다. 식품마다 열처리 방법 별 각각의 최적 처리 시간을 가지고 있어, 높은 효율성이나 산업적으로 이용하려면 최적의 전처리 방법과 처리 시간을 산정하는 것이 중요하다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1967-1971
• /
• 2013

Aim of our study is finding adsorbents suitable for pre-concentration of chemical warfare agents (CWAs). We considered Tenax, bare silica and polydimethylsiloxane (PDMS)-coated silica as adsorbents for dimethyl methylphosphonate (DMMP) and dipropylene glycol methyl ether (DPGME). Tenax showed lower thermal stability, and therefore, desorption of CWA simulants and decomposition of Tenax took place simultaneously. Silica-based adsorbents showed higher thermal stabilities than Tenax. A drawback of silica was that adsorption of CWA simulant (DMMP) was significantly reduced by pre-treatment of the adsorbents with humid air. In the case of PDMS-coated silica, influence of humidity for CWA simulant adsorption was less pronounced due to the hydrophobic nature of PDMS-coating. We propose that PDMS-coated silica can be of potential importance as adsorbent of CWAs for their pre-concentration, which can facilitate detection of these CWAs.

• 유기물자원화
• /
• 제10권1호
• /
• pp.87-95
• /
• 2002

슬러지의 용해율 증가 및 생분해율 향상을 위해 전처리 방법별 처리조건 및 회분, 연속실험을 실시하였다. 용해효과실험에서 SCOD 기준 용해율 효과는 온도무고정 초음파처리(35분)가 가장 높고, 다음으로 알칼리처리(pH13), 열처리($200^{\circ}C$, 30min), 온도고정 초음파처리(60분)순서였다. 초기 회분실험에서 적정 혼합비율은 가스생성량을 기준하여 종오니 : 기질비가 4 : 6일 때(유기물 부하량$3.48kg/m^3{\cdot}day$) 가장 효과적이었다. 회분실험에서 가스발생량은 열처리($200^{\circ}C$, 30min)가 가장 높고, 다음으로 초음파처리(온도 무조정), 알칼리처리(pH9), 초음파처리(온도조정)순서였다. 연속실험은 회분실험에서 가장 효과적인 열처리($200^{\circ}C$, 30min) 시료를 이용하였다. pH는 열처리 (pH 7.2~7.3)가 무처리 (pH 6.9~7.0)시료에 비해 다소 높은 값을 나타내었다. HRT가 길수록 유출수의 pH가 상승하는 경향을 나타내고 있고, 이는 유기물부하의 감소에 따른 생성유기산의 농도저하와 유기산의 가스로의 전환에 의해 생성된 $N_2$가스의 완충작용에 기인한다고 생각된다. 반응조내의 SCOD 농도는 전처리 시료가 무처리에 비해 약 2.5배 높고, 또 HRT는 짧을수록 높았다. 용해성 단백질 및 탄수화물 농도도 전처리 시료가 무처리 시료에 비해 각각 2배 및 3.3배 높았다. 가스 생성량은 열처리시료가 무처리 시료에 비해 약 2배 높아, 열처리가 소화효율 향상에 효과적임을 알 수 있었다. 가스 생성량은 HRT 7day일 때 가장 유리했다. 그러나 HRT 2.5day 일 때 가스 생성량은 무처리 시료에 비해서도 낮은 값을 나타내어 혐기성 세균이 고농도로 축적된 유기산의 저해를 받았기 때문이라고 생각된다.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.70-74
• /
• 2012

In thermal barrier coating (TBC) systems, the life of the coating depends on thermally grown oxide (TGO) layer because most of the failure of TBCs occurs when TGO growth increases. In order to inhibit TGO growth, process was additionally carried out before the heat treatment of the TBC coating layer at $1200^{\circ}C$ in air. In the additional process, heat treatment in vacuum furnace of < $10^{-5}$ torr was conducted for 7 h and 14 h before the heat treatment. The area and length of TGO, as well as the crack length in the TBC were characterized using a scanning electron microscope (SEM). The TGO thickness and crack of specimens pre-heat treated in vacuum furnace were reduced by 45% compare to those heat treated in furnace. Consequently, pre-heat treatment in a vacuum furnace process lead to effective inhibition of growth of the TGO.

• 한국축산식품학회지
• /
• 제30권4호
• /
• pp.641-648
• /
• 2010

The objective of this study was to evaluate the pre-heating treatment effects on the antioxidant properties of ethanolic garlic and onion extracts. Garlic and onion with or without heating ($100^{\circ}C$, 30 min) were extracted with ethanol, and the total phenolic content, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability, iron chelating ability, reducing power, and antioxidant activity in a linoleic acid emulsion system were evaluated. Garlic (41%) had a higher drying yield than onion (11%). Regardless of pre-heating, ethanol extracts of onion resulted in an approximately 25-fold higher yield than those of garlic. Thermal treatment before extraction decreased the levels of ethanol-soluble phenolics for both garlic and onion. Regardless of pre-heating, the radical scavenging abilities of ethanol extracts from garlic were greater than the ethanol extracts from onion. The iron chelating abilities of ethanol extracts from fresh and heated garlic were 85 and 81% at 10 mg/mL, respectively, whereas those of onion extracts were 10 and 9% at the same concentration, respectively. However, no differences in reducing power between garlic and onion extracts were observed. Both garlic and onion inhibited the formation of hydroperoxide in linoleic acid emulsion systems when ethanol was used as a solvent. Overall, garlic extracts had greater antioxidant activity than onion extracts, and the antioxidant activity of garlic and onion extracts were not significantly affected by thermal treatment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.665-667
• /
• 2005

VIATRON TECHNOLOGIES has developed FE-RTP system that enables LTPS LCD and AMOLED manufacturers to produce poly-Si films at low cost, high throughput, and high yield. The system employs sequential heat treatment methods using temperature control and rapid thermal processor modules. The temperature control modules provide exceptionally uniform heating and cooling of the glass substrates to within ${\pm}2^a\;C$. The rapid thermal process that combines heating with field induction accelerates the treatment rates. The new FE-RTP system can process $730{\times}920mm$ glass substrates as thin as 0.4 mm. The uniform nature of poly-Si films produced by FE-RTP resulted in AMOLED panels with no laser-Muras. Furthermore, FE-RTP system also showed superior performances in other heat treatment processes involved in poly-Si TFT fabrications, such as dopant activation, gate oxide densification, hydrogenation, and pre-compaction.

• 유기물자원화
• /
• 제9권1호
• /
• pp.90-98
• /
• 2001

혐기성소화공정에서 슬러지의 용해가 전체 반응속도를 제한하고 있다. 용해율 향상을 위해 산(pH1.5, 3, 4, 5) 및 알칼리처리(pH9, 10, 13), 열처리(50, 100, 150, $200^{\circ}C$) 및 초음파처리(400W, 20kHz, 15, 20, 25, 30. 35, 40, 50, 60min)가 각 조건에서 실시되어 아래의 결과를 얻었다. 용해효과는 SCOD기준으로 무처리에 비해 산처리는 효과가 매우 낮았고, 알칼리처리는 pH13에서 986%, 열처리는 $200^{\circ}C$에서 959%, 초음파처리는 처리시간 35분에서 온도고정의 경우 802%, 온도 무고정의 경우 1123%의 높은 효과를 나타내어, 초음파처리가 가장 효과적이었다. VS/SS비율은 전처리에 따른 용해율과 정의 상관성을 가져, 용해율 효과의 지표로써 이용 가능했다. 총가스발생량은 열처리 $200^{\circ}C$가 무처리에 비해 1.8배, 열처리 $150^{\circ}C$가 1.4배, pH9의 알칼리처리가 1.2배, 온도 무고정 초음파 90분처리가 1.3배의 가스증산 효과를 나타내어, 열처리의 경우가 가장 효과적이었다. 또한 초음파처리의 경우, 온도고정보다 무고정의 경우가 저온 열처리의 동시효과가 있어 보다 효과적이었다.

• 한국환경농학회지
• /
• 제35권2호
• /
• pp.128-136
• /
• 2016

BACKGROUND: Hydrothermal carbonization reaction is the thermo-chemical energy conversion technology for producing the solid fuel of high carbon density from organic wastes. The hydrothermal carbonization reaction is accompanied by the thermal hydrolysis reaction which converse particulate organic matters to soluble forms (hydro-thermal hydrolysate). Recently, hydrothermal carbonization is adopted as a pre-treatment technology to improve anaerobic digestion efficiency. This research was carried out to assess the effects of hydro-thermal reaction temperature on the methane potential and anaerobic biodegradability in the thermal hydrolysate of organic sludge generating from the wastewater treatment plant of poultry slaughterhouse .METHODS AND RESULTS: Wastewater treatment sludge cake of poultry slaughterhouse was treated in the different hydro-thermal reaction temperature of 170, 180, 190, 200, and 220℃. Theoretical and experimental methane potential for each hydro-thermal hydrolysate were measured. Then, the organic substance fractions of hydro-thermal hydrolysate were characterized by the optimization of the parallel first order kinetics model. The increase of hydro-thermal reaction temperature from 170℃ to 220℃ caused the enhancement of hydrolysis efficiency. And the methane potential showed the maximum value of 0.381 Nm³ kg^-1-VS_added in the hydro-thermal reaction temperature of 190℃. Biodegradable volatile solid(VSB) content have accounted for 66.41% in 170℃, 72.70% in 180℃, 79.78% in 190℃, 67.05% in 200℃, and 70.31% in 220℃, respectively. The persistent VS content increased with hydro-thermal reaction temperature, which occupied 0.18% for 170℃, 2.96% for 180℃, 6.32% for 190℃, 17.52% for 200℃, and 20.55% for 220℃.CONCLUSION: Biodegradable volatile solid showed the highest amount in the hydro-thermal reaction temperature of 190℃, and then, the optimum hydro-thermal reaction temperature for organic sludge was assessed as 190℃ in the aspect of the methane production. The rise of hydro-thermal reaction temperature caused increase of persistent organic matter content.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.705-710
• /
• 2001

So for the quartz-glassy crucible wastes which was used for pulling up silicon-single-crystal ingot have simply reused for refractory raw-materials, or exhausted. This study is concerned on the advanced recycling-technology that is obtained by the proper micro-particle preparation process in order to fabricate fine amorphous silica filler for EMC (Epoxy Molding Compound). Therefore, this paper will deal with the physical, chemical and thermal pre-treatment process for efficient impurity removal and with the proper micro-particle process for producing the amorphous silicafiller. In view of the results, if the chemical, physical and thermal pre-treatment process for efficient elimination of impurity was passed, the purity of wasted fused glassy crucible is almost equal to the its of first anhydrous quartz glass. Thus, it was understood that this wasted fused glassy crucible was sufficient value of recycling, though it was damaged. When the ingot was fabricated, Phase transformation of crystallization by heat treatment (heat hysteresis phenomenon) was not changed. So, it was understood that as fused silica in the amorphous state, as It is, recycling possibility was very high