• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.287-289
• /
• 1999

This paper proposes mechanism analysis in thermal overload relay. Overload protection performance is closely connected with mechanism of thermal overload relay. In shortage of analytical technique, we have experienced many difficulties in development of thermal overload relay. We applied analytical results to develop optimum thermal overload relay.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.193-204
• /
• 1998

Numerical analysis was performed with multicomponent transport properties and detailed reaction mechanisms for axisymmetric 2-D CH$_{4}$ jet diffusion flame. Calculations were carried out twice with the $C_{2}$-Thermal Mechanism including $C_{2}$ and thermal NO reactions and the $C_{2}$-Full Mechanism including prompt NO reactions in addition to the above $C_{2}$-Thermal NO mechanism. The results show that the flame structures such as flame temperature, major and minor species concentration are indifferent to respective mechanisms. The production path of Thermal NO is dominant comparing with that of Prompt NO in total NO production of pure CH$_{4}$ jet diffusion flame. This is because thermal NO mechanism mainly contributes to positive formation of NO in the whole flame region, but Prompt NO mechanism contributes to negative formation in the fuel rich region. In addition, 0$_{2}$ penetration near the nozzle outlet affects the flame structures, especially N0$_{2}$ formation characteristics.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.434-439
• /
• 2010

A compliant mechanism is a mechanism that produces its motion by the flexibility of some or all of its members when input force or thermal load is applied. Whereas the topology optimizations based on homogenization and SIMP parameterization have been successfully applied for compliant mechanism design, ESO approach has been hardly considered yet for the optimization of these types of systems. In this paper, traditional ESO method is adopted to achieve the optimum design of a compliant mechanism for thermal load, since AESO method cannot consider the effect of both heat conduction and convection. Sensitivity number, a criterion for element removal in traditional ESO, was newly defined for input thermal loading. The procedure has been tested in numerical applications and compared with the results obtained by other methods to validate these approaches.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.13-18
• /
• 2002

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2453-2458
• /
• 2007

The performance of polysilicon thin film transistor (p-Si TFT) has an important role in the operation of active matrix liquid crystal displays. To fabricate the p-Si TFTs that have uniform characteristics, understanding of the recrystallization mechanism of silicon is crucial. Especially, the analysis of the transient temperature variation and the liquid-solid interface motion is required to find the mechanism. The thermal conductivity is one of the most important parameters to understand the mechanism. In this work, a KrF eximer laser beam was irradiated to amorphous silicon thin films. We measured the transient reflectivity at the wavelength of 633 nm. We carried out the numerical simulation of one dimension conduction equation so that we determined the most well-fitted thermal conductivity by comparing the numerically obtained transient reflectivity with the experimentally measured one. The experimentally determined thermal conductivity of amorphous silicon thin films is 1.5 W/mK.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권3호
• /
• pp.207-216
• /
• 2013

This paper, we classified LED failure mechanisms that occur due to the delamination and analyzed each of the mechanism that gives the LED PKGs the effect. Usually, the LED is composed of several materials which are LED chips, gold wire, phosphor, epoxy resin, adhesive, reflector and lead frame. These different materials are usually delaminated in trouble conditions which are huge temperature difference, hot and humid or mechanical shocked. When the components are delaminated, a luminance will be lost and moisture be absorbed easily, a thermal resistance be increased attendantly. In this paper, we experimented to investigate failure mechanism of the thermal resistance and failure mechanism of the decrease of luminance that occur due to the delamination. A thermal shock test was performed to reproduce this phenomena by subjecting samples to a cold-hot cyclling process between $-30^{\circ}C$(15min) and $110^{\circ}C$(15min). The samples were inspected at 200, 600 and 1,000 cycles. We measured feature of LED using the spatial analyzer, optical microscope, thermal resistance, photometer, scanning electron microscope (SEM). As a result, the progression of the crack and the thermal resistance and decrease in luminance are proportional to number of thermal shock.

• 한국잠사곤충학회지
• /
• 제34권1호
• /
• pp.49-56
• /
• 1992

반응개시제로 potassium persulfate를 사용하여 견섬유에 MAA를 처리하였을 때의 반응 mechanism을 구명하기 위하여, 열분석과 일련의 기구분석을 행하였으며, 이 중 열분석에 의해 얻어진 결과는 다음과 같다. Differential scanning calorimeter 관찰로부터는 metharcrylamide에 의한 가공견섬유는 견 fibroin과 methacrylamide polymer의 열분석에 의한 peak가 뚜렷하게 분리되어 나타났으며, 가공율이 증가함에 따라 두 peak가 모두 고온측으로 이동하는 것으로 나타났다. 가공견섬유의 흡습율은 가공율이 증가함에 따라 증가하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.155-164
• /
• 1998

Numerical analysis was performed with multicomponent transport properties and detailed reaction mechanisms for axisymetric 2-D CH4 jet diffusion, partial premixed, premixed flame. Calculations were carried out twice with C2-Full Mechanism including prompt NO reaction in addition to the above C2-Thermal NO Mechanism. The role of thermal NO mechanism and prompt NO mechanism on each flame's NO production is investigated by using the numerical result. The NOx production of each flame were evaluated Quantitatively in terms of the NOx emission index

• 폴리머
• /
• 제25권6호
• /
• pp.866-875
• /
• 2001

본 연구에서는 고온 산화분위기 하에서 탄소/탄소 복합재료의 열적 향상을 위해 사용된 tetraethylorthosilicate(TEOS)의 첨가량에 따른 복합재료의 kinetic parameter에 기초한 열분해 메카니즘 및 열안정성을 열중량분석기(TGA)를 사용하여 고찰하였다 TEOS를 함유한 탄소/탄소 복합재료의 kinetic parameter, 즉 열분해 활성화 에너지 ($E_d$), 반응차수(n), 지수앞 인자 (A)는 각각 136 kJ/mol, 0차, 및 2.3$\times$$10^9s^{-1}$을 나타내었으며, 특히 IPDT 및 $E_d$로부터 살펴본 복합재료의 열안정성은 탄소/탄소 복합재료에 TEOS가 첨가되면 크게 향상되었는데, 이는 산소에 대한 산화방지막, 즉 $SiO_2$의 형성으로 인한 복합재료 표면에서의 카본 활성종에 산소의 침투를 방해하여 TEOS를 함유한 복합재료가 이를 함유하지 않은 것에 비하여 표면 산화 속도가 감소되어 열안정성이 증가하였다고 사료된다.

• 항공우주시스템공학회지
• /
• 제17권2호
• /
• pp.94-102
• /
• 2023

큐브위성용 태양전지판 분리장치는 열선 또는 저항소자의 발열로 나일론선을 절단하여 구조물의 구속을 해제하는 나일론선 절단방식 구속분리장치가 주로 적용되고 있다. 일반적으로 태양전지판 조립체의 발사하중을 고려한 구조해석을 수행하여 구속분리장치의 설계가 이루어지고 있으나, 발사 이후 궤도 열환경에 대한 구속분리장치의 열적 검토 및 분석사례는 전무한 실정이다. 따라서, 본 논문에서는 현재 개발중인 큐브위성 STEP Cube Lab-II에 적용되는 나일론선 절단 기반 구속분리장치의 열적 안정성 평가를 수행하고자 한다. 위성이 POD (Picosatellite Orbital Deployer)에서 사출되고 태양전지판이 전개되기까지의 분리장치 온도 분포를 검토하여 분리장치의 허용온도 범위 내에서 안정적인 구속 분리가 될 수 있도록 분리장치에 대한 궤도 열해석을 수행하였다. 또한, 열해석 결과를 기반으로 열진공시험을 수행하여 분리장치의 설계를 검증하였다.