• Elastomers and Composites
• /
• 제48권4호
• /
• pp.276-281
• /
• 2013

acrylic polyol로 개질한 polyester형 polyurethane foam을 quasi prepolymer법으로 제조하였다. 열적 및 동적 기계적 성질은 thermal gravimetric analysis 및 dynamic mechanical analysis에 의하여 분석하였다. 또한 유리전이온도는 differential scanning calorimeter로 측정하였다. Acrylic polyol 함량이 증가함에 따라 TGA에 의해 측정한 열적 안정성은 약간 감소하였다. 그리고 acrylic polyol 함량이 증가함에 따라 저장 탄성률은 증가한 반면에 tan delta 값은 감소하였다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 국제학술대회
• /
• pp.386-393
• /
• 2005

The calcination characteristic of waste eggshell were examined by thermal gravimetric analysis (TGA), qualitative and quantitative analysis by X-ray fluorescence, and microstructural analysis by scanning electronic microscopy(SEM). The calcined sample was lager grain and pore size.

• 한국연소학회지
• /
• 제16권3호
• /
• pp.21-26
• /
• 2011

Thermal analyses are conducted to measure chemical kinetic parameters of an unknown liquid fuel with various components. Thermal Analyses are divided into two different methods such as TGA(Thermo-Gravimetric Analysis) and DSC(Differential Scanning Calorimety). Non-isothermal experimental results are analyzed by adopting TGA and they are filtered by Freeman-Carroll method. As a results of the analysis, chemical parameters of the activation temperature and the reaction order are measured to be 6128.2 K and 1.4, respectively. Furthermore, the chemical kinetic parameters are obtained by a variety of mathematical processing methods. It has been found that they show a little difference depending on the processing method.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.32-40
• /
• 2019

During the manufacturing process of a printed circuit board(PCB), fumes and mists are generated as the ink dries on the PCB surface. The generated fumes and mists are deposited in the dryer wall and the exhaust duct. Deposited fumes and mists may present a fire hazard if the dryer temperature control system fails. In this study, the thermal stability of the fumes and mists deposited in the dryer and ducts has been analyzed by experimental methods such as thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), auto ignition temperature (AIT), and multiple mode calorimetry(MMC). According to the experimental analyses, experimental samples are likely to generate gas at the temperature ($180{\sim}240^{\circ}C$) that deviates from the normal operating temperature ($150{\sim}156^{\circ}C$). It has been shown that the thermal stability is degraded when the temperature is deviated from the normal operating temperature. In the end, engineering and management safety measures of accidental prevention have been suggested.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.421-424
• /
• 2011

본 연구에서는 열분석법을 이용하여 혼합 액체연료의 수치해석에 필요한 여러 가지 인자를 측정하였다. 이러한 열분석법에는 열중량 분석방법(TGA, Thermo-Gravimetric Analyzer)과 시차 주사열량 측정법(DSC, Differential Scanning Calorimetry)이 있다. 열중량 분석방법을 통한 비등온 실험(non-isothermal experimental) 결과를 토대로 Freeman Carroll의 수학적인 후처리 방법을 이용하여 미지의 액체연료의 구성 성분에 대한 동역학적 변수인 활성화 온도와 반응차수로 각각 6128.2 K와 1.4를 얻었다. 그 외 다양한 수학적 처리 방법에 따른 동역학적 변수의 값을 구해보았고, 계산 결과는 처리방법에 따라 약간의 차이를 보였다.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.313-322
• /
• 2014

난연제 가운데 가장 많이 사용되는 할로겐 함유 난연제는 사용상 환경적인 제한을 받고 있어서 비할로겐타입인 인계에 기초한 난연제가 각광을 받고 있다. 난연제는 수지에 가해지는 경우에 흔히 열분해와 기계적 특성저하를 일으킨다. 물성의 열화를 최소화하고 충분한 난연성을 얻기 위한 시도로 새로운 난연제에 대한 연구를 수행하였다. 본 연구에 있어서는 diaryl alkyl phosphate esters, aromatic phosphate esters 및 phosphonium nitron 난연제 등 세가지 형태의 비할로겐 인계에 기초한 난연제를 합성하여 GC, IR 및 TGA 등으로 합성 및 열적 특성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1062-1067
• /
• 2007

In this paper, we have investigated thermal properties of semiconductive shield materials for power cables. EEA (Ethylene Ethyl Acrylate) was used for base polymer and TGA (Thermal Gravimetric Analysis) and AFM (Atomic Force Microscope) were investigated with various carbon black and CNT (carbon nanotube) contents. When CNT reinforced composites and conventional composite were investigated with TGA, we knew that thermal properties of CNT reinforced composite were better than them of conventional composite. To investigate roughness, we used AFM. Before and after aging, AFM was applied and after aging, roughness was increased. As a result, suitable CNT and CB(carbon black) content is CNT:CB=50:50.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.403-408
• /
• 1996

석탄화력발전소 폐기물인 석탄회와 요오드화 세슘의 반응특성을 DTA(Differential Thermal Analysis), TGA(Thermo-Gravimetric Analysis) 장치를 이용하여 분석하였다. 본연구에 사용된 석탄회는 85%의 실리카와 알루미나를 함유하고 있으며 Si/Al 몰비는 2.1 이었다. DTA와 TGA의 열분석 결과 CsI의 분해, 석탄회와 기체상 세슘의 반응 등으로 이루어져 있다. 석탄회와 CsI의 혼합물은 94$0^{\circ}C$ 이상에서 Pollucite 가 형성되었다. 반응생성물들의 SEM 분석결과 표면이 거칠며 bulky한 crystal 형태로서 구형의 석탄회와는 매우 다른 형상을 보였다. 석탄회는 요오드화세슘의 고정화를 위해서 적합한 알루미노규산염 원료물질들 중의 하나임을 확인하였다.

• Applied Microscopy
• /
• 제50권
• /
• pp.12.1-12.11
• /
• 2020

Hot stage microscopy (HSM) is a thermal analysis technique that combines the best properties of thermal analysis and microscopy. HSM is rapidly gaining interest in pharmaceuticals as well as in other fields as a regular characterization technique. In pharmaceuticals HSM is used to support differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA) observations and to detect small changes in the sample that may be missed by DSC and TGA during a thermal experiment. Study of various physical and chemical properties such sample morphology, crystalline nature, polymorphism, desolvation, miscibility, melting, solid state transitions and incompatibility between various pharmaceutical compounds can be carried out using HSM. HSM is also widely used to screen cocrystals, excipients and polymers for solid dispersions. With the advancements in research methodologies, it is now possible to use HSM in conjunction with other characterization techniques such as Fourier transform infrared spectroscopy (FTIR), DSC, Raman spectroscopy, scanning electron microscopy (SEM) which may have additional benefits over traditional characterization techniques for rapid and comprehensive solid state characterization.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.389-392
• /
• 1997

Glutaronitrile(GN) was introduced to diglycidyl ether of bisphenol A(DGEBA)/ 4,4'-methylene dianiline(MDA) system to improve toughness. Effects of GN contents on thermal decomposition of epoxy resin system were investigated. To study the characteristics of thermal decomposition, thermo-gravimetric analysis(TGA) and Kissinger equation were used. Thermal degradation temperatures were about 365$^{\circ}C$ regardless of GN contents. Activation energies of thermal decomposition in epoxy resin system were almost constant below 10 phr and decreased above 15 phr.