• 교육시설
• /
• 제15권5호
• /
• pp.13-20
• /
• 2008

The sense of place at school environment becomes more important as children increasingly spend more time in school and children's attachment to the environment affects the cognition development of children. The goal of this research is to identify characteristics that enhance the sense of place for children in outdoor space and check the possibilities of forming it in the school environments. Through the analysis of design document and design report for schematic design of elementary school which is executed through Korean Institute of Educational Facilities between 2002-2005, 47cases from 32elementary schools are analyzed. As a result it is found that designers tend to orient towards the visual aspects compared to other invisible aspects such as thermal comfort and participation of children, which is extracted as a key characteristics of forming a sense of place for children. More attention is required to enhance the sense of place in school environment to support the child development in everyday space.

• 천문학회지
• /
• 제47권6호
• /
• pp.259-277
• /
• 2014

G192.8-1.1 has been known as one of the faintest supernova remnants (SNRs) in the Galax until the radio continuum of G192.8-1.1 is proved to be thermal by Gao et al. (2011). Yet, the nature of G192.8-1.1 has not been fully investigated. Here, we report the possible discovery of faint non-thermal radio continuum components with a spectral index ${\alpha}{\sim}0.56(S_{\nu}{\propto}{\nu}^{-{\alpha}})$ around G192.8-1.1, while of the radio continuum emission is thermal. Also, our Arecibo $H_I$ data reveal an $H_I$ shell, expanding with an expansion velocity of $20-60km\;s^{-1}$, that has an excellent morphological correlation with the radio continuum emission. The estimated physical parameters of the $H_I$ shell and the possible association of non-thermal radio continuum emission with it suggest G192.8-1.1 to be an~0.3 Myr-old SNR. However, the presence of thermal radio continuum implies the presence of early-type stars in the same region. One possibility is that a massive star is ionizing the interior of an old SNR. If it is the case, the electron distribution assumed by the centrally-peaked surface brightness of thermal emission implies that G192.8-1.1 is a "thermal-composite" SNR, rather than a typical shell-type SNR, where the central hot gas that used to be bright in X-rays has cooled down. Therefore, we propose that G192.8-1.1 is an old evolved thermal-composite SNR showing recurring emission in the radio continuum due to a nearby massive star. The infrared image supports that the $H_I$ shell of G192.8-1.1 is currently encountering a nearby star forming region that possibly contains an early type star(s).

• 한국융합학회논문지
• /
• 제12권7호
• /
• pp.235-241
• /
• 2021

헤어미용을 통한 외모 관리는 미용산업의 근간(根幹)을 이루면서 열을 이용한 퍼머넌트 웨이브는 헤어살롱에서 많이 시술되고 있지만, 열 퍼머넌트 웨이브 시술로 인한 모발 손상은 불가피한 현실이다. 따라서 모발 웨이브 형성력을 더욱 높일 수 있고 고객의 모발 손상을 최소화할 수 있는 열 퍼머넌트 웨이브에 대한 효율적인 방안을 제시할 목적으로 본 연구를 진행하였다. 후두부의 버진 헤어를 채취하여 thermal rod pretreatment and thermal permanent wave treatment를 한 후, Atomic Force Microscope를 통한 모발 거칠기 분석과 3D-image를 연구하였다. 연구 결과 평균 거칠기(Ra)와 십점 평균 거칠기(Rz) 모두 4구간이 각각 223nm와 853nm로 산출되면서 가장 높은 수치를 나타냈다. 실험 데이터의 표본이 적은 한계성을 지니고 있으나 본 연구를 통해 웨이브 형성력을 더욱 상승시킬 수 있으며, 고객 모발의 큐티클 보호와 함께 모발 손상을 최소화할 수 있는 열 퍼머넌트 웨이브에 대한 객관적인 방안 제시가 현실적으로 가능해질 것으로 판단한다.

• 한국주조공학회지
• /
• 제18권5호
• /
• pp.481-487
• /
• 1998

Shell sand is widely used to make a complex shape castings due to its good collapsibility. When molten metal is poured into the mold, various gases are generated by the thermal decomposition of binder in the shell core. Casting defects such as blow hole and blister come from these gases. If it is possible to predict the evolution of gas quantitatively, it may provide effective solutions for minimizing the casting defects. To examine the gas evolution by shell core quantitatively, casting experiment and calculation were carried out. Gas pressure and gas volume evolved by shell core were measured in the experiment, and temperature distribution in the shell core was obtained by heat transfer analysis. From the result above, prediction on the gas volume evolved during pouring was tried. As forming pressure of the shell core increased and forming temperature decreased, the gas evolution increased. There was a close relationship between the calculated gas volume evolved and the measured one.

• 소성∙가공
• /
• 제7권3호
• /
• pp.282-290
• /
• 1998

In bulk metal forming processes prediction of tool life is very important for saving production cost and achieving good material properties. Generally the service life of tools in metal forming process is limited to a large extent by wear, fracture and plastic deformation of tools. In case of hot and warm forging processes tool life depends on wear over 70%. In this study finite element analyses are con-ducted to warm and hot forging by adopting suggested wear model. By comparison of simulation and eal profile of die suggested wear model. By comparison of simulation and real profile of die suggested model is verified.

• 소성∙가공
• /
• 제7권3호
• /
• pp.274-281
• /
• 1998

The service life of tools in metal forming process is to a large extent limited by wear, fatigue fracture and plastic deformation. In elevated temperature forming processes wear is the predominant factor for tool operating life. To predict tool life by wear Achard's model is generally applied. Usually hardness of die is considered to be a function of temperature. But hardness of die is a function of not only tem-perature but also operating time of die. To consider softening of die by repeated operation it is necessary to express hardness of die by a function of a function of temperature and time. By experiment of reheating of die softening curve was obtained and applied to suggest modified Archard's Model in which hardness is a function of main tempering curve.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.31-38
• /
• 2003

Line heating is an effective and economical process for forming flat metal plates into three-dimensional shapes for plating of ships. Because the nature of the line heating process is a transient thermal process, followed by a thermo elastic plastic stress field, predicting deformed shapes of plate is very difficult and complex problem. In this paper, neural network model o3r solving the inverse problem of metal forming is proposed. The backpropagation neural network systems for determining line-heating positions from object shape of plate are reported in this paper. Two cases of the network are constructed-the first case has 18 lines which have different positions and directions and the second case has 10 parallel heating lines. The input data are vertical displacements of plate and the output data are selected heating lines. The train sets of neural network are obtained by using an analytical solution that predicts plate deformations in line heating process. This method shows the feasibility that the neural network can be used to determine the heating-line positions in line heating process.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3923-3927
• /
• 2010

대전롤러는 감광체의 표면과 접촉된 상태로 회전하면서 드럼 표면을 대전시켜야 하므로 접촉이 잘 되도록 적당한 도전성을 갖는 탄성체로 만들어 진다. 또한 그 롤러 표면은 코팅을 하게 되는데 코팅제의 종류나 코팅 방식에 따라서 대전특성이나 화상특성이 달라지고, 또한 환경의 변화에 따라 화상특성이 달라진다. 본 연구에서는 고품질의 화상형성을 얻을 수 있는 대전 롤러의 제조를 위하여 적합한 도전성 탄성체 롤러를 개발하였다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.926-934
• /
• 1991

The effect of aggregates on the forming and sintering behaviors of BaTiO3 was studied. Aggregates and deaggregates of fine crystallite were obtained by thermal decomposition of oxalate coprecipitates and subsequently crushing them with a press, respectively. Large voids formed by packing of aggregates were not easily eliminated despite the successive destruction of aggregates with increasing forming pressure. As a result, compacts of aggregates showed inhomogeneity with larger mid-pore size and broader pore size distribution with respect to those of deaggregates. This inhomogeneity caused differential shrinkage and consequental internal stress, which retarded densification. The differential sintering increased the size of mid-pores in the initial stage, and formed duplex structure composed of dense region with abnormally grown grains and porous region with fine grains. The driving force of this abnormal grain growth shown in the specimens of aggregates was attributed to the minimization of the elastic strain energy due to internal stress.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.525-531
• /
• 2014

A cowl cross is a part of the car's instrument panel used to maintain the rigidity of the vehicle body side. The application of laser welding has the benefits of speed and thermal deformation compared to arc welding. An ultra-high strength steel sheet is used to reduce the weight of the vehicle body parts. Generally, formability of such a steel sheet is poor because its elongation is very low. For this reason, a method for cold forming of an ultra-high strength steel sheet is required. This paper describes how to improve the formability and weldability of the ultra-high strength steel sheet. Mechanical tests of this material were also performed to evaluate the welding properties of $CO_2$ (GMAW) and those of laser welding.