• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.27-34
• /
• 2015

The correlation between crack propagation and localized recrystallization are compared in a series of cross section analyses on thermal cycled edgebond and underfilm material applied wafer level chip scale package (WLCSP) components with a baseline of no-material applied WLCSP components. The results show that the crack propagation distribution and recrystallization region correlation can explain potential degradation mechanisms and support the damage accumulation history in a more efficient way. Edgebond material applied components show a shift of damage accumulation to a more localized region, thus potentially accelerated the degradation during thermal cycling. Underfilm material applied components triggered more solder joints for a more wider distribution of damage accumulation resulting in a slightly improved thermal cycling performance compared to no-material applied components. Using an analysis on localized distribution of recrystallized areas inside the solder joint showed potential value as a new analytical approach.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.60-64
• /
• 2008

According to previous research, welding-induced stress in steel structures can significantly affect the fatigue behaviour; it produces initial damage of weldiug part of structure locally and residual stresses reduce the fatigue strength after welding precess. In this study, through continuum damage mechanics, we can estimate the weldiug damage using the stress and strain history during welding process and the effect of welding residual stress for assessment of fatigue life. The variation of welding-induced stresses and strains need be traced precisely in advance for a reliable weldiug damage assessment. In this study, a damage and fatigue analysis techniques for steel structures with welding-induced residual stress are presented. First, We calculate the history of temperature according with welding process. And residual stress with a welding thermal history was evaluated by non-linear thermal stress analysis. Secondly, welding damage and fatigue life are estimated with kinetic damage law.

• Computers and Concrete
• /
• 제2권3호
• /
• pp.189-202
• /
• 2005

This paper presents an analysis of some experimental results concerning micro-structural tests, permeability measurements and strain-stress tests of four types of High-Performance Concrete, exposed to elevated temperatures (up to $700^{\circ}C$). These experimental results, obtained within the "HITECO" research programme are discussed and interpreted in the context of a recently developed mathematical model of hygro-thermal behaviour and degradation of concrete at high temperature, which is briefly presented in the Part 2 paper (Gawin, et al. 2005). Correlations between concrete permeability and porosity micro-structure, as well as between damage and cracks' volume, are found. An approximate decomposition of the thermally induced material damage into two parts, a chemical one related to cement dehydration process, and a thermal one due to micro-cracks' development caused by thermal strains at micro- and meso-scale, is performed. Constitutive relationships describing influence of temperature and material damage upon its intrinsic permeability at high temperature for 4 types of HPC are deduced. In the Part II of this paper (Gawin, et al. 2005) effect of two different damage-permeability coupling formulations on the results of computer simulations concerning hygro-thermo-mechanical performance of concrete wall during standard fire, is numerically analysed.

• 한국융합학회논문지
• /
• 제12권7호
• /
• pp.235-241
• /
• 2021

헤어미용을 통한 외모 관리는 미용산업의 근간(根幹)을 이루면서 열을 이용한 퍼머넌트 웨이브는 헤어살롱에서 많이 시술되고 있지만, 열 퍼머넌트 웨이브 시술로 인한 모발 손상은 불가피한 현실이다. 따라서 모발 웨이브 형성력을 더욱 높일 수 있고 고객의 모발 손상을 최소화할 수 있는 열 퍼머넌트 웨이브에 대한 효율적인 방안을 제시할 목적으로 본 연구를 진행하였다. 후두부의 버진 헤어를 채취하여 thermal rod pretreatment and thermal permanent wave treatment를 한 후, Atomic Force Microscope를 통한 모발 거칠기 분석과 3D-image를 연구하였다. 연구 결과 평균 거칠기(Ra)와 십점 평균 거칠기(Rz) 모두 4구간이 각각 223nm와 853nm로 산출되면서 가장 높은 수치를 나타냈다. 실험 데이터의 표본이 적은 한계성을 지니고 있으나 본 연구를 통해 웨이브 형성력을 더욱 상승시킬 수 있으며, 고객 모발의 큐티클 보호와 함께 모발 손상을 최소화할 수 있는 열 퍼머넌트 웨이브에 대한 객관적인 방안 제시가 현실적으로 가능해질 것으로 판단한다.

• 해양환경안전학회지
• /
• 제26권4호
• /
• pp.317-326
• /
• 2020

본 연구에서는 LNG 추진선에서 배관의 파손으로 천연가스가 누출되었을 때 누출공의 크기별 플래시 화재, 과압, 복사열에 따른 피해범위를 ALOHA(Areal Location of Hazardous Atmospheres)를 이용하여 산출했다. 그리고 민감도 분석을 위해 환경 변수(풍속, 대기온도, 대기 안정도)와 공정 변수(배관 압력, 배관 길이)로 구분하여 다양한 시나리오별 피해영향범위를 분석했다. 그 결과 환경 변수에 따른 피해범위는 플래시 화재에 의한 피해범위가 가장 컸으며 다음으로 과압, 복사열 순서로 큰 피해범위를 나타냈다. 그리고 공정 변수에 따른 피해범위를 산출한 결과 배관의 압력과 길이, 누출공의 크기와 관계없이 플래시 화재에 의한 피해범위가 가장 컸으며, 환경 변수와 동일하게 과압, 복사열 순서로 높은 피해범위를 보였다. 또한 누출공의 크기가 클수록 환경 변수와 공정 변수가 피해범위에 큰 영향을 주었으며 제트 환재에 의한 피해범위는 환경 변수에 비해 공정 변수에 의한 피해범위가 더 큰 것을 알 수 있었다.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.343-348
• /
• 2015

In this paper, arc Zn thermal spray coating was carried out on the SS400 steel, and then various electrochemical characteristics and surface damage behavior of Zn thermal spray coating layer were analyzed. As the results, the potential of Zn thermal spray coating layer presented driving voltage above 300 mV compare to that of SS400 steel. The passivity characteristic in anodic polarization curve was not presented. It was adequate to as sacrificial anode material. In the surface damage after galvanostatic experiments, uniform corrosion tendency of Zn thermal spray coating layer was clearly observed with acceleration of the dissolution reaction. In conclusion, Zn thermal spray coating could be determined to represent the corrosion protection effect by stable sacrificial anodic cathodic protection method in seawater because it had sufficient driving voltage and uniform corrosion damage tendency for the SS400 steel.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.837-843
• /
• 1998

This paper presents the thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the secondary piping of LMFR using Green's function method and standard FEM. The thermohydraulic loading conditions used in the present analysis are simplified sinusoidal thermal loads and the random type data thermal load. The thermomechainical fatigue damage was evaluated according to ASME code subsectionNH. The analysis results of fatigue for the sinusoidal and random load cases show that fatigue failure would occur at a geometrically discontinuous location during 90,000 hours of operation The fracture mechanics analysis showed that the crack would be initiated at an early stage of the operation. The fatigue crack was evaluated to propagate up to 5 ㎜ along the thickness direction during the first 944 and 1083 hours of operation for the sinusoidal and the random loading cases, respectively.

• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.566-584
• /
• 2001

In this paper, the progressive deformation and the creep-fatigue damage for the conceptually designed reactor internals of KALIMER(Korea Advanced Liquid MEtal Reactor) are carried out by using the elastic analysis method in the RCC-MR code for normal operating conditions including the thermal load, seismic load (OBE) and dead weight. The maximum operating temperature of this reactor is 53$0^{\circ}C$ and the total service lifetime is 30 years. Thus, the time- dependent creep and stress-rupture effects become quite important in the structural design. The effects of the thermal induced membrane stress on the creep-fatigue damage are investigated with the risk of the elastic follow-up. To calculate the thermal stress, detailed thermal analyses considering conduction, convection and radiation heat transfer mechanisms are carried out with the ANSYS program. Using the results of the elastic analysis, the progressive deformation and creep-fatigue damages are calculated step by step using the RCC-MR in detail. This paper ill be a very useful guide for an actual application of the high temperature structural design of the nuclear power plant accounting for the time-dependent creep and stress-rupture effects.

• 한국화재소방학회논문지
• /
• 제30권5호
• /
• pp.116-123
• /
• 2016

화재모델링을 이용한 목표 대상물의 열적 손상에 대한 정량적 위험성 평가방법이 검토되었다. 이를 위해 대표적인 화재모델로서 FDS가 사용되었으며, 특정 구획 내에서 화원 면적 변화에 따른 전기 케이블의 열적 손상과 관련된 확률이 평가되었다. 보수적 관점에서 적용되고 있는 '최대 손상임계 초과확률'과 손상시간의 정보가 포함된 '손상확률'이 체계적으로 비교되었다. 목표 대상물이 표면온도 및 열유속에 대한 최소 손상기준에 도달하는 순간에 열적 손상이 발생된다는 가정이 적용된 최대 손상임계 초과확률에 비해 본 연구에서 제안된 손상확률은 정량적 화재 위험성을 보다 현실적으로 평가할 수 있음을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.7-12
• /
• 2000

The automatic turbine startup system provides turbine control based on thermal stress. During the startup, control system monitors and evaluates main components of turbine using damage mechanism and life assessment. In case of valve chest, the temperature of inner/outer wall is measured by thermo-couples and the safety of these values are evaluated by using allowable ${\Delta}T$ limit curve during the startup. Because allowable ${\Delta}T$ limit curve includes life assessment, it is possible to apply this curve to turbine control system. In this paper, low cycle fatigue damage and combined rupture and low cycle fatigue damage criterion proposed for yielding the allowable ${\Delta}T$ limit curve of CV(control valve) chest. To calculate low cycle fatigue damage, the stress analysis of valve chest has peformed using FEM. Automatic turbine startup to assure service life of CV was achieved using allowable ${\Delta}T$ limit curve.