• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.56-62
• /
• 1998

Polysilicon resistors with high thermal stability have been fabricated by a new mixed process using POCl$_{3}$ doping and arsenic implantation. Varous temeprature coefficients, which range form 510 ppm/.deg. C to -302 ppm/.deg. C, were shown from the fabricated polysilicon resistors with sheet resistance of 58~107 .ohm./sq in the operating temeprature of 27~150.deg. C. The temperature coefficient of the polysilicon resistor by the mixed technology was about 4.3 times as low compared to the conventional polysilicon resistor using POCl$_{3}$ doped single process with the same sheet resistance of 75.ohm./sq. In addition, the mixed technology can be applied to obtain nearly zero temperature coefficient for polysilicon resistors which are reliable and insensitive to temperature.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.422-429
• /
• 2023

High-strength low-alloy steel is one of the widely used materials in onshore and offshore plant engineering. We investigated the alloying effect of solute atoms in α-Fe based alloy using ab initio calculations. Empirical equations were used to establish the effect of alloying on the Vicker's hardness, screw energy coefficient, and edge dislocation energy coefficient of the steel. Screw and edge energy coefficients were improved by the addition of V and Cr solute atoms. In addition, the addition of trace quantities of V, Cr, and Mn enhanced abrasion resistance. Solute atoms and contents with excellent mechanical properties were selected and their thermal conductivity and thermal expansion behavior were investigated. The addition of Cr atom is expected to form alloys with low thermal conductivity and thermal expansion coefficient. This study provides a better understanding of the state-of-the-art research in low-alloy steel and can be used to guide researchers to explore and develop α-Fe based alloys with improved properties, that can be fabricated in smart and cost-effective manners.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.261-264
• /
• 2002

Interfacial evaluation, damage sensing and cure monitoring of single carbon fiber/thermosetting composite with different curing processes was investigated using electro-micromechanical test. After curing, residual stress was monitored by measurement of electrical resistance (ER) and then it was compared to correlate with various curing processes. In thermal curing, curing shrinkage appeared significantly by matrix shrinkage and residual stress due to the difference in thermal expansion coefficient (TEC). The change in electrical resistance (ΔR) on thermal curing was higher than that on ultraviolet (UV) curing. For thermal curing, apparent modulus was the highest and reaching time until same strain was faster. So far thermal curing shows strong durability on the IFSS after boiling test.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1205-1215
• /
• 1992

본 연구에서는 1차원 상변화문제를 확장하여 사각형 주형내에서의 접촉열저항 을 고려한 2차원 상변화문제를 해석하고자 한다.즉 고상/액상 경계면인 상변화면을 추적하기 위하여 온도수식법(temperature formulation method)을 적용시 나타나는 복 잡성을 극복하기 위하여 제시된 엔탈피법을 이용하여 순수물질의 경우 뿐만 아니라 2상영역이 존재하는 합금에서의 온도분포, 상변화면의 이동속도 및 총응고에 소요되는 시간등의 열적특성을 해석하며, 또한 이러한 열적특성에 영향을 미치는 매개변수를 도출하고자 주형의 형상, 주형 외벽에서의 열전달계수, 접촉 열전달계수, 주형의 열전 도계수 및 주물의 초기온도등의 변화에 따른 효과를 고찰한다.

• 한국재료학회지
• /
• 제4권2호
• /
• pp.206-212
• /
• 1994

여러가지 화학 조성을 갖는 aluminium titanate mullite복합제는 $AI_2O_3$분말을 알콜 분산용액에서 $Si(OC_2H_5)_4$과 $Ti(OC_2H_5)_4$의 단계적인 가수 분해로 합성되었다. Mullite함량이 20-50vol%인 소결체($1600^{\circ}C$/2h)는 비교적 높은 강도와 낮은 열팽창 계수를 갖는 aluminium titanate를 개발할 수 있는 가능성을 보였다. 이와 같은 결과는 mullite로 인한 aluminium titanate의 입자 크기의 억제와 미세균열에 의하여 얻어졌다. aluminium titanate의 함량이 70-80vol% 복합재료는 우수한 열충격 저항성을 지녔으며 상온 강도는 31-45MPa이었다. 열충격 저항성, 영률, sound velocity화 열팽창 계수가 연구되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1581-1583
• /
• 1999

Epoxy Compound has been used as insulation material in cable accessories. During the applying voltage to cable, heat shock is induced to accessory by the temperature difference between atmosphere and conductor. In this study, crack resistance, thermal and mechanical properties were evaluated about conventional epoxy compound and rubber toughened epoxy compound. Because rubber absorbs the stress caused by heat shock, crack resistance of rubber toughened epoxy compound is high. In the case of low thermal expansion coefficient, the compound shows high crack resistance because of low volumetric change.

• 에너지공학
• /
• 제24권4호
• /
• pp.71-80
• /
• 2015

PVC 프레임의 취약한 강도를 보완하기 위해 사용되는 철재 보강재는 상대적으로 높은 열전도 특성으로 인해 PVC 프레임의 전체적인 열 성능을 떨어뜨리는 역할을 한다. 본 연구는 철재 보강재의 타공을 통해 표면적을 줄임으로서 전열 면적의 감소를 통한 열저항 특성을 개선하고, 감소된 만큼 두께를 높임으로서 타공으로 인한 강도 저하를 보완하였다. 이에 대한 성능을 평가하기 위해 PVC frame, PVC frame + original steel stiffener, PVC frame + 30% perforated steel stiffener, PVC frame + 50% perforated steel stiffener, PVC frame + 65% perforated steel stiffener 등 5개의 시험체를 구성하였으며, 시험 방법은 수식과 시뮬레이션에 의한 방법을 적용하였다. 시험 결과 PVC frame + 65% perforated steel stiffener이 열저항 특성과 강도특성에서 가장 높은 것으로 평가되었다.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.981-988
• /
• 2010

The effects of Cr and Al contents in Fe-Al and Fe-Cr alloys on oxidation resistance, hardness, and the thermal expansion coefficient were investigated. Fe-Al and Fe-Cr alloys above 10wt.%Al and 20wt.%Cr contents have a high oxidation resistance. The hardness of the Fe-Al and Fe-Cr alloys increased with an increase in Al and Cr contents due to solid solution or formation of an intermetallic compound. The coefficients of thermal expansion of the Fe-Al alloys were higher than those of the Fe-Cr alloys because the coefficient of thermal expansion of Al was higher than that of Fe and Cr.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.23-29
• /
• 2013

In recent years, development of energy conversion systems using hydrogen as an energy source has been accelerated globally. Even though hydrogen is an environment-friendly energy source, safety and effectiveness issues in storage, transportation, and usage of hydrogen should be clearly resolved in every application. Therefore, sensors for detecting hydrogen leakage, especially for fuel cell electric vehicles, should be designed to have much higher resolution and accuracy in comparison with conventional gas sensors. In this study, we conducted to determine the design parameters for the semiconductor hydrogen sensor with optimized sensing conditions under the thermal distribution characteristic and thermal transfer characteristic. The heat generation study on power supply voltage was studied for correlation analysis of thermal energy according to the power supply voltage variation from 1.0 voltage to 10.0 voltage every 0.5 voltage. And we studied for the temperature coefficient of resistance with hydrogen sensor.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.212-215
• /
• 2002

Interfacial evaluation and damage sensing of the carbon fiber/epoxy-amine terminated (AT)-polyetherimide (PEI) composites were performed using micromechanical test and electrical resistance measurement. As AT-PEI content increased, the fracture toughness of epoxy-AT-PEI matrix increased, and thus their interfacial shear strength (IFSS) was improved due to the improved toughness. After curing process, the changes in electrical resistance (ΔR) with increasing AT-PEI contents increased gradually because of the changes in thermal expansion coefficient (TEC) and thermal shrinkage of matrix. Matrix fracture toughness was correlated to the IFSS, residual stress and electrical resistance. The results obtained from the electrical resistance measurement during curing process, reversible stress/strain, and durability test were consistent with modified matrix toughness properties.