• 제목/요약/키워드: Thermal Event

검색결과 143건 처리시간 0.029초

퍼지-랜덤 변수를 이용한 실시간 제어 시스템의 성능 및 신뢰도 평가기법 연구 (Evaluation of the Performance and Reliability of a Real-Time System Using Fuzzy-Random Variables)

  • 민병조;이석주;김학배
    • 제어로봇시스템학회논문지
    • /
    • 제6권6호
    • /
    • pp.433-440
    • /
    • 2000
  • To flexibly evaluate performance and reliability of a real-time system which is intrinsically characterized by stringent timing constraints to generate correct responses, we propose fuzzyrandom variables and build a discrete event model embedded with fuzzy-random variables. Also, we adapt fuzzy-variables to a path-space approach, which derives the upper and lower bounds of reliability by using a semi-Markov model that explicitly contains the deadline information. Consequently, we propose certain formulas of state automata properly transformed by fuzzy-random variables, and present numerical examples applying the formulas to RTP(Rapid Thermal Process) to show that a complex system can be properly evaluated based on this model by computer simulation.

  • PDF

Acoustic Emission 파형분류에 의한 플라즈마 용사 코팅재의 인장해석 (Tensile Analysis of Plasma Spray Coating Material by Classification of AE Signals)

  • 김귀식;오명범
    • 한국해양공학회지
    • /
    • 제15권4호
    • /
    • pp.60-65
    • /
    • 2001
  • Thermal spray coating is formed by a process in which melted particles flying with high speed towards substrate, then crash and spread on the substrate surface cooled and solidified in a very short time, Stacking of the particles makes coating. In this study, the exfoliation of $Al_2$O$_3$ and Ni-4.5wt.%Al thermally sprayed coating which were deposited by an atmospheric plasma spray apparatus are investigated using an AE method. A tensile test is conducted on notch specimens in a stress range below the elastic limit of substrate. The wave forms of AE generated from the three coating specimens can be classified by FFT analysis into two types which low frequency(type I waveform is considered to corresponds exfoliation of coating layers and type II waveform corresponds the plastic deformation of notch tip or the resultant fracture of coating. The fracture of the coating layers can estimate by AE event and amplitude, because AE features increase when the deformation generates.

  • PDF

전기적 방법을 이용한 전력용 콘덴서 열화특성 연구 (A Study on the Aging Characteristics of Power Capacitors using Electrical Methods)

  • 김은식;김영욱;김종서;윤철섭;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.199-202
    • /
    • 1998
  • Power capacitors are highly reliable equipment due to their completely enclosed configuration. Aging diagnosis system using partial discharge(PD) and acoustic emission(AE) is being highlighted as a research area for degradation of power capacitors. Their dielectric strength can be however reduced due to some stresses such as over-voltage or thermal degradation of the insulation material during their long period of operation. In this paper, it has been developed to express the AE of the EVENT(average amplitude) and HIT(pulse count) according to the source location. And real time measurement of PD signals for aging diagnosis of power capacitors.

  • PDF

Proposal of CPC Function Improvement

  • Lee, Byung-Il;Kim, Jong-Jin;Baek, Seung-Su;Kim, Hee-Cheol;Lee, Sang-Yong
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1995년도 추계학술발표회논문집(2)
    • /
    • pp.562-567
    • /
    • 1995
  • The concept of VLDT (Variable Low DNBR Trip), a new CPC trip function, was proposed and applied to the events of increase in secondary heat removal, such as an excess feedwater event anti an IOSGADV (Inadvertent Opening S/G Atmospheric Dump Valve). Major assumption used in this study was no time delay to LOOP (Loss of Offsite Power) after turbine trip. In case of using this VLDT function, safety criterion of DNB would not be violated under the same condition as previous analysis without any change in thermal margin.

  • PDF

나노제너레이터의 연구소개 및 최근 기술동향 (Introduction to research and current trend about nanogenerator)

  • 김상우;김성수;윤홍준;류한준
    • 진공이야기
    • /
    • 제1권4호
    • /
    • pp.14-20
    • /
    • 2014
  • Since recent electronics technologies have been developed and they tend to spend huge amount of electrical power, self-powered electronics have been paid attention worldwide. To realize self-powered electronics, energy harvesting technology, which generally converts ambient energy into electrical energy, has to be introduced. Among numerous energy sources, mechanical, thermal, and electrostatic event would be of broad interest in field of energy harvesting. Here, this article introduces the promising alternative energy concepts of nanogenerator including piezoelectric, triboelectric, and hybrid types. With these nanogenerators, we are able to apply onto not only self-powered system, but expect these open green energy market.

The Effect Analysis for Rain Attenuation of VSAT

  • Tak, Hong-Sung;Wook, Shin-Gang
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.65.4-65
    • /
    • 2001
  • In case of data transmission using the upper 10GHz frequency, rain results in attenuation of radio waves. And the most serious atmospheric effect in a satellite link is the rainfall. The attenuation of rainfall very seriously affects the quality of transmission line. Because the rain increases thermal noise and interference, and decreases the amplitude of the signal. KOWACO manages the VSAT system instead of VHF network for communication of rain and water-level data from 1998. The purpose of this system is to monitor the change of water-level and rain data during a flood duration. VHF system acquires the data by a call per a hour. But the satellite network obtains the data whenever event data occur. Thus the satellite network is more powerful than the VHF system. In study ...

  • PDF

열 하중에 의한 AP/HTPB 복합추진제의 발화특성 모델링 연구 (Time to ignition analysis of AP/HTPB composite propellant)

  • 정태용;김형원;도영대;유지창;여재익
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.279-282
    • /
    • 2008
  • 고체 로켓 추진제로 널리 사용되는 물질은 AP/HTPB 복합추진제이다. 고체 로켓 주위에 열 하중이 가해진다면(화재 등) 추진제가 발화할 수 있고, 사고의 원인이 된다. 본 연구에서는 AP/HTPB 복합추진제의 주위에 열 하중을 가함으로써 AP/HTPB의 발화특성을 확인해 보았다.

  • PDF

500MW 표준석탄화력발전소의 환경안전우선 설비운영개념 도입방안 고찰 (Study of the Environment Priority Facility Operation Concept of 500MW Standard Coal Thermal Power Plant)

  • 이갑주;정진도;김산
    • 대한안전경영과학회지
    • /
    • 제24권2호
    • /
    • pp.1-9
    • /
    • 2022
  • In korea, 500MW standard coal fired power plants were designed and operated for the initial base load, so facility stability was prioritized from facility problem to treatment, but now we needed to research for minimizing greehouse gas emissions at the operation of coal fired power plants. research on various facilities and technologies was actively conducted to reduce environment pollutants was drastically reduced, but research and attempts on coping measures in the event of a reduction facility problem were in sufficient. this study considered investigated ways to minimized pollutants by quickly responding to logic development and application of the load runback concept in case of serious problems with environmental pollutant reduction facilities such as NOx reduction selective catalytic reduction facilities, SOx reduction wet flue gas desulpherisation facilities, and TSP(Total Suspended Particles) collection low temperature electric precipitator.

LPG 충전시설에 대한 신뢰도 분석과 정량적 위험성 분석에 관한 연구 (A Study on Reliability Analysis and Quantitative Risk Analysis for Liquefied Petroleum Gas Station)

  • 김인원;진상화;김태우;김인태;여영구
    • 한국가스학회지
    • /
    • 제5권4호
    • /
    • pp.40-48
    • /
    • 2001
  • 본 연구에서는 LPG 충전소에 대하여 Fussel-Vesely 중요도와 RDF 및 RIF 중요도를 수행하여 위험성 등급(Risk Rank)을 설정하였다 설정된 위험성 등급에서 위험성이 가장 큰 장치 및 설비에 대하여 정량적 위험성 분석을 수행하였다. LPG 충전소에 대한 중요도 분석결과 외부사고가 가장 위험하다고 확인되었으며, ekda 으로 구조물 결함과 파이프 배관의 부식의 위험등급이 높았다. 정량적 위험성 분석 결과로는 LPG 충전소 저장탱크의 완전히 파열하였을 경우에 대한 BLEVE의 경가 발생하였을 경우에 복사열에 의해 공정 설비에 손해를 입히기에 충분한 거리는 46.3m로 분석되었다.

  • PDF

정지기상위성 자료를 이용한 정량적 황사지수 개발 연구 (The Study on the Quantitative Dust Index Using Geostationary Satellite)

  • 김미자;김윤재;손은하;김금란;안명환
    • 대기
    • /
    • 제18권4호
    • /
    • pp.267-277
    • /
    • 2008
  • The occurrence and strength of the Asian Dust over the Korea Peninsular have been increased by the expansion of the desert area. For the continuous monitoring of the Asian Dust event, the geostationary satellites provide useful information by detecting the outbreak of the event as well as the long-range transportation of dust. The Infrared Optical Depth Index (IODI) derived from the MTSAT-1R data, indicating a quantitative index of the dust intensity, has been produced in real-time at Korea Meteorological Administration (KMA) since spring of 2007 for the forecast of Asian dust. The data processing algorithm for IODI consists of mainly two steps. The first step is to detect dust area by using brightness temperature difference between two thermal window channels which are influenced with different extinction coefficients by dust. Here we use dynamic threshold values based on the change of surface temperature. In the second step, the IODI is calculated using the ratio between current IR1 brightness temperature and the maximum brightness temperature of the last 10 days which we assume the clear sky. Validation with AOD retrieved from MODIS shows a good agreement over the ocean. Comparison of IODI with the ground based PM10 observation network in Korea shows distinct characteristics depending on the altitude of dust layer estimated from the Lidar data. In the case that the altitude of dust layer is relatively high, the intensity of IODI is larger than that of PM10. On the other hand, when the altitude of dust layer is lower, IODI seems to be relatively small comparing with PM10 measurement.