• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.251-272
• /
• 2017

In this paper, the thermo-mechanical vibration characteristics of functionally graded (FG) nanobeams subjected to three types of thermal loading including uniform, linear and non-linear temperature change are investigated in the framework of third-order shear deformation beam theory which captures both the microstructural and shear deformation effects without the need for any shear correction factors. Material properties of FG nanobeam are assumed to be temperature-dependent and vary gradually along the thickness according to the power-law form. Hence, applying a third-order shear deformation beam theory (TSDBT) with more rigorous kinetics of displacements to anticipate the behaviors of FG nanobeams is more appropriate than using other theories. The small scale effect is taken into consideration based on nonlocal elasticity theory of Eringen. The nonlocal equations of motion are derived through Hamilton's principle and they are solved applying analytical solution. The obtained results are compared with those predicted by the nonlocal Euler-Bernoulli beam theory and nonlocal Timoshenko beam theory and it is revealed that the proposed modeling can accurately predict the vibration responses of FG nanobeams. The obtained results are presented for the thermo-mechanical vibration analysis of the FG nanobeams such as the effects of material graduation, nonlocal parameter, mode number, slenderness ratio and thermal loading in detail. The present study is associated to aerospace, mechanical and nuclear engineering structures which are under thermal loads.

• 한국융합학회논문지
• /
• 제11권5호
• /
• pp.139-144
• /
• 2020

본 연구에서는 드럼자체와 브레이크에 대한 시뮬레이션 해석을 하였으며 열해석 결과와 구조 해석을 통한 내구성을 고찰하여 그 해석 결과를 얻었다. 브레이크 실린더로 인하여 힘을 받는 라이닝,라이닝의 확장으로 인하여 힘을 받는 드럼 내부, 축의 회전으로 인하여 힘을 받는 드럼에 대한 열응력 및 구조 해석을 통하여 어느 부분에 등가응력과 변형량이 큰지를 확인하였다. 본 연구 결과를 종합하여 브레이크 디스크설계에 응용한다면 열변형 방지 및 그 내구성을 증대시키는데 활용성이 클 것으로 사료된다. 본 연구 결과는 실제적으로 드럼 브레이크에서의 열응력에 견딜 수 있는 내구성 있는 설계에 유용하게 적용할 수 있다. 계절별 기차선로 이음새에서의 내구성 해석을 적용함으로서 본 연구 결과가 미적인 설계에 응용되는 융합 연구에 유리하다고 보여진다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2574-2581
• /
• 1993

A Shadow mask in C. R. T. (Cathod Ray Tube) undergoes a temperature increase due to impinging electron beams emitted from guns, and thermal deformation from such temperature rise may cause the electron beams to island on the panel, and thus give rise to depolarization. Hence the analysis of temperature distribution for a shadow mask is an important procedure for designing the shadow mask. In this paper, we are concerned with nonlinear finite element analysis of the temperature distribution on a shadow mask. First of all, we replace shadow mask, containing numerous apertures of a slit type, by an orthotropic shell without apertures, and calculate the apparent thermal conductivities. Because of thermal radiation, which is one of the major heat transfer mechanism for shadow masks, the resulting finite element equation is nonlinear and solved by the Newton method. Finally numerical examples are illustrated for a 21" FST(Full Square Tube) shadow mask, and followed by discussion.sion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.521-522
• /
• 2009

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1205-1214
• /
• 1999

A new quadrilateral plane stress element is developed for efficient and accurate analysis of thermal stress problems. It is convenient to use the same mesh and the same shape functions for thermal analysis and stress analysis. But, because of the inconsistency between deformation related strain field and thermal strain field, oscillatory responses and considerable errors in stresses are resulted in. To avoid undesired oscillations, strain approximation is enhanced by supplementing several assumed strain terms based on the variational principle. Thermal deformation is incorporated into the generalized mixed variational principle for displacement, strain and stress fields, and basic equations for the modified enhanced assumed strain method are derived. For the stress approximation of bilinear elements, the $5{\beta}$ version of Pian and Sumihara is adopted. The numerical results for several problems show that the present element behaves well and reduces oscillatory responses. it also results in almost the same magnitude of error as compared with the quadratic element.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.228-234
• /
• 2013

This study focuses on development of a finite element model for analysis of thermal characteristics of a direct-connection spindle of a machining center by joint simulation of heat transfer and thermal deformation. Two finite element analyses were carried out procedurally for heat transfer, first, to identify temperature distribution of components of the spindle and then for thermal deformation to identify their structural behavior based on the temperature distribution. It was assumed that the heat transfer between a component revolving and the surrounding air is identical to that between a flat plate and the running air on it and the heat transfer is based on a uniform surface heat flux for turbulent flow. The results from the analyses were compared with those from experiments to validate the finite element model.

• Composites Research
• /
• 제30권6호
• /
• pp.410-415
• /
• 2017

본 연구에서는 탄소섬유강화 복합재의 제작 시 열 잔류응력으로 인한 변형을 유한요소 프로그램 ABAQUS에서 User Subroutine을 이용한 유한요소 해석을 통해 예측한다. 탄소섬유강화 복합재의 변형에 영향을 주는 다양한 요인 중 온도구배, 제품 형상, 적층각 및 적층순서, 수지의 화학수축, 열 잔류응력을 고려한 복합재 성형을 해석하였다. 같은 형상의 실제 모델과 해석 모델의 결과를 비교한다. 또한 해석 결과를 분석하여 실제 제작의 오차에 적용하여 실제 제작에서의 성형 완성도를 높이는데 목적이 있다.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.143-150
• /
• 2016

In shipbuilding, hull assemblies are manufactured by welding. The thermal deformation caused by the welding produces shape deformation. Counter-deformed design methods have been used in shipyards to cope with the weld-induced deformation of ship assembles. Finite element methods (FEMs) are frequently used to estimate welding distortion in the counter-deformed design. For the estimation of welding distortion, producing uniform rectangular elements is required to enter thermal loads on the welding line and obtain accurate analysis results. In this paper, a new automatic mesh generation method is proposed for prediction of welding deformation in FEM. Meshes are constructed for test cases to demonstrate the feasibility of the proposed mesh generation method.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1712-1721
• /
• 2004

A method of measuring the thermal diffusivity of semi-infinite solid material at room temperature using photothermal displacement is proposed. In previous works, within the constant thickness of material, the thermal diffusivity was determined by the magnitude and phase of deformation gradient as the relative position between the pump and probe beams. In this study, however, a complete theoretical treatment of the photothermal displacement technique has been performed for thermal diffusivity measurement in semi-infinite solid materials. The influence of parameters, such as, radius and modulation frequency of the pump beam and the thermal diffusivity, was studied. We propose a simple analysis method based on the zero -crossing position of real part of deformation gradient and the minimum position of phase as the relative position between two beams. It is independent of parameters such as power of pump beam, absorption coefficient, reflectivity, Poisson's ratio, and thermal expansion coefficient.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.138-143
• /
• 2005

The important problem in the high speed spindles is to reduce and minimize the thermal effect by the motor and ball bearings. Thermal characteristics according to the bearing preload and hollow shaft cooling are studied for the spindle with the oil mist lubrication and high frequency motor. Temperature distribution and thermal deformation according to the spindle speed, preload and flow rate are measured by thermocouple and gap sensor. Temperature distribution and thermal deformation are analyzed by using the finite element method. The results of analysis are compared with the measured data. This paper show that the suitable preload and hollow shaft cooling are very effective to minimize the thermal effect by the motor and ball bearings. This study indicates that temperature distribution and thermal deformation of the high speed spindle system can be estimated reasonably by using the three dimensional model through the finite element method and supports thermal optimization and more effective cooling method.