• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.143-146
• /
• 2008

In this study the thermal impact characteristics by forest fire are extensively investigated using temperature controlled ovens. The test conditions for thermal impact damage are simulated according to the characteristics of natural forest fire. The test pieces are suspension porcelain insulators made by KRI in 2005 for transmission lines. In the thermal impact cycle tests with $300\;^{\circ}C$ thermal impact gradient (-70 to $230\;^{\circ}C$), cycling in 10 minute periods, no critical failures occurred in the test samples even with long cycle times. But in tests with thermal impact gradient from room temperature to $200-600\;^{\circ}C$, cycling in 10 to 30 minute periods, there were critical failures of the porcelain insulators according to the thermal impact gradient and quenching method. In the case of thermal impact by forest fire, it was found of that duration time is more important than the cycling time, and the initiation temperature of porcelain insulator failures is about $300\;^{\circ}C$, in the case of water quenching, many cracks and fracture of the porcelain occurred. It was found that the thermal impact failure is closely related to the displacement in the cement by thermal stress as confirmed by simulation. It was estimated that the initiation displacement by the thermal impact of $300\;^{\circ}C$ is about 0.1 %. Above 1% displacement, it is expected that the most porcelain insulators would fail.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.226-241
• /
• 2000

Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estonia(Kuraray Co.. Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer's instructions, rectangular tensile test specimens measuring $1.5{\times}2.0{\times}4.5mm$ were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at $25^{\circ}C$ for 10 days, and another group was subjected to thermal cycling($10,000{\times}$) in water($5/55^{\circ}C$). All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey's test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn: 1. Both in drying condition and thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were at to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05) 4. The aliphatic C=C absorbance peak of Estonia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.427-437
• /
• 2000

Recently the 2nd generation laboratory composite resins were introduced. Although the mechanical properties of these composite resins have been improved, there were some disadvantages such as discoloration, low abrasion resistance and debonding between metal and resin. The purpose of this study was to evaluate the tensile bond strength between non-pecious dental alloy(verabond) and four veneering reinforced composite resins ; Targis(Ivoclar Co., U.S.A.), Artglass(Kulzer CO., Germany), Sculpture(Jeneric Pentron Co., U.S.A.), and Estonia(Kurary Co., Japan). All test metal specimens were polished with #1,000 SiC paper, and sandblasted with $250{\mu}m$ aluminum oxide. After then. according to manufacturer's instructions metal adhesive primer and veneering resins were applied. All test specimens were divided into two groups. One group was dried in a desiccator at $25^{\circ}C$ for 3 days, the other group was subjected to thermal cycling($2,000{\times}$) in water($5/55^{\circ}C$). Tensile bond strength was measured using Instron Universal Testing machine and the fractured surface was examined under the naked eyes and scanning electron microscope. Within the limitations imposed in this study, the following conclusions can be drawn: 1. In no-thermal cycling groups, there were no significant differences between Estenia and VMK68 but there were significant differences between Targis, Artglass, Sculpture and VMK68(p<0.05). 2. In no-thermal cycling resin groups, the highest tensile bond strength was observed in Estenia and there were significant differences between Estenia and the other resins(p<0.05). 3. Before and after thermal cycling, there were significant differences in tensile bond strength of Targis and Artglass(p<0.05). The tensile bond strength of Artglass was decreased and that of Targis was increased. 4. In no-thermal cycling groups, Artglass showed mixed fracture modes(95%), but after thermal cycling, Artglass showed adhesive fracture modes(75%).

• 구강회복응용과학지
• /
• 제37권3호
• /
• pp.101-110
• /
• 2021

목적: 본 연구에서는 3D 프린팅 레진과 임시 수복용 레진의 열순환 처리에 따른 전단결합강도의 변화를 연구하고자 하였다. 연구 재료 및 방법: DLP 방식을 이용하여 3D 프린팅 레진으로 표본을 제작하였다. 표본은 상부에 부착한 임시 수복용 레진(PMMA, bis-acryl resin) 및 열순환 처리 횟수(대조군, 2,000, 3,000, 5,000회)에 따라 8개의 군으로 분류하였다. 만능 재료시험기 상에서 결합된 표본들의 전단결합강도를 측정하였다. 결과: 열순환 처리의 횟수가 증가함에 따라 3D 프린팅 레진에 대한 PMMA와 bis-acryl resin의 전단결합강도는 PMMA에서 3,000회와 5,000회 간을 제외하고 모두 감소하였다. PMMA 그룹에서는 3,000회 미만의 열순환 처리 횟수 간에서 유의한 전단결합강도의 차이를 보였으며(P < 0.05), 3,000회 이상의 열순환 처리 횟수 간에는 유의한 차이를 보이지 않았다(P > 0.05). Bis-acryl resin 그룹에서는 대조군과 2,000회 간, 대조군과 3,000회 간, 대조군과 5,000회 간의 열순환 처리에는 유의한 전단결합강도의 차이가 있었으며(P < 0.05), 2,000회와 3,000회 간, 3,000회와 5,000회 간에는 유의한 차이가 없었다(P > 0.05). 결론: 3D 프린팅 레진에 대한 임시 수복용 레진의 전단결합강도는 열순환 처리를 한 경우 결합강도가 낮아지는 경향을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.975-976
• /
• 2007

Thermal and mechanical stresses, caused by repetitive start and stop and load fluctuation during long time operation, on winding stator bars are one of the main causes for electrical degradation of insulating materials. To understand the degradation process, we manufactured bar specimens with the same processes that make generator winding stator bars and the specimens were subjected to various degrees of thermal cycling. Measurements of the insulation properties, such as dissipation factor, tip-up and partial discharge, for un-aged specimens and for specimens aged by thermal cycling at 50, 100, 250, 500 and 1000 thermal cycles were performed. Finally all specimens were tested to obtain electrical breakdown voltages. In this paper we present the data and electrical degradation analysis results obtained during this program.

• 한국식품위생안전성학회지
• /
• 제1권2호
• /
• pp.157-162
• /
• 1986

공시균의 생육과 aflatoxin 생성에 미치는 temperature cycling의 영향을 조사하기 위해 temperature cycling($28^{\circ}C$에서 12시간, $7^{\circ}C$에서 12시간) aflatoxin 최대 생성 온도인 $28^{\circ}C$ 및 temperature cycling 할 때에 동일한 input를 가지는 $17.5^{\circ}C$의 세 가지 온도 시험구로 나누어 실험하였다. 그 결과 SLS 배지에서 temperature cycling을 행함으로써 $28^{\circ}C와\;17.5^{\circ}C$에서 일정하게 배양하는 것보다 공시균의 aflatoxin 생성이 증가하였다. 공시균의 aflatoxin 생합성은 색소 생성과는 밀접한 관계가 있는 반면 지질 생성과는 상반된 현상을 보였으며, 지방산 조성과는 뚜렷한 연관성을 보이지 않았다.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.27-32
• /
• 2010

Cu pillar 범프와 Sn 패드로 구성된 플립칩 접속부를 형성한 후, Sn 패드의 높이에 따른 Cu pillar 플립칩 접속부의 열 싸이클링 및 고온유지 신뢰성을 분석하였다. Cu pillar 플립칩 접속부를 구성하는 Sn 패드의 높이가 5 ${\mu}m$에서 30 ${\mu}m$로 증가함에 따라 접속저항이 31.7 $m{\Omega}$에서 13.8 $m{\Omega}$로 감소하였다. $-45^{\circ}C{\sim}125^{\circ}C$ 범위의 열 싸이클을 1000회 인가한 후에도 Cu pillar 플립칩 접속부의 접속저항의 증가가 12% 이하로 유지되었으며, 열 싸이클링 시험전과 거의 유사한 파괴 전단력을 나타내었다. $125^{\circ}C$에서 1000 시간 유지시에도 Cu pillar 플립칩 접속부의 접속저항의 증가가 20% 이하로 유지되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.997-998
• /
• 2013

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.419-424
• /
• 2006

In this study, a thermal control system which applied a Peltier device for the polymerase chain reaction(PCR) machine is to be designed. Here in order for it to easily follow the characteristics of the thermal cycle existing for gene amplification of the PCR sample, a PCR control board utilizing a thermal sensor, a Peltier, and a 8 bit microprocessor is made up. Especially a fuzzy type PD control algorithm is applied periodically in time response, and control system is implemented. For that matter, the characteristic data of subject system is obtained and analysed to begin with. Based on this analysed data, the proposed control algorithm is applied and an evaluation of the performance of the whole system take place through the PC.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3190-3194
• /
• 2010

Mixed electrolytes formed by the combination of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide (BMP-TFSI) ionic liquid and standard liquid electrolyte are prepared and characterized. Linear sweep voltammetry measurements demonstrate that these mixed systems exhibit a wide electrochemical stability window, allowing them to be suitable electrolyte for carbonaceous anode-based lithium-ion batteries. Lithium-ion cells composed of graphite anode and $LiCoO_2$ cathode are assembled using the mixed electrolytes, and their cycling performances are evaluated. The cell containing proper content of BMP-TFSI shows good cycling performance comparable to that of a cell assembled with organic electrolyte. The presence of BMP-TFSI in the mixed electrolyte contributes to the reduction of the flammability of electrolyte solution and the improvement of the thermal stability of charged $Li_{1-x}CoO_2$ in the electrolyte solution.