• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1995.03a
• /
• pp.121-134
• /
• 1995

대수층의 수리상수를 산출하기 위한 양수시험 분석에 이용되는 가장 기본적인 이론은 Theis 이론이다. Theis 이론에서는 지하수의 흐름은 2차원의 방사상 흐름이다. 그러나, 1차 공극으로 이루어진 충적층 대수층이나 사암과 같은 다공질 대수층과는 달리 기반암내에 발달되어 있는 균열 대수층은 균열(fractures), 열극(fissures) 또는 단층과 같은 2차 공극으로 이루어져 있다. (중략)

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.4 no.1
• /
• pp.11-19
• /
• 2008

Groundwater flow in confined aquifer and heat transport in underground geologic media are using same governing equation(line source) like well fuction. Therefore the conventional slope method using only later data obtained from in-situ thermal response test to determine the thermal conductivity of vertical geothermal heat exchanger(GHEX) is basically identical with one of Theis straight line method of aquifer test under artesian condition. In case that the pumping rate(Q, $m^3$/d) and drawdown(s,m) which are used for input data of existing hydrogeologic computer programs for aquifer test are replaced and converted to supplying heat energy per unit length of bore hole(Q/L,w/m or Kcal/h.m) and temperatures (T,$^{\circ}C$)measured at in and out-let of GHEX as in put data respectively, thermal conductivity around geothermal heat exchanger can be easily estimated without any special modification of the existing hydrogeologic computer program. Two numbers of time series temperature variation data obtained from in situ geothermal response test are analized using Theismethods(standard curve and straight line method) by using existing aquifer test program and conventional Slope method proposed by ASHRAE. The results show that thermal conductivity values estimated by two straight methods are identical and the difference of estimated values between standard curve methods and Slope method are also within acceptable ranges. In general,the thermal conductivity estimated from Theis straight linemethod gives more accurate value than the one of Slope method due to that Slope method uses only visual matching otherwise Theis method uses automatic curve matching estimation with reducing RSS.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.139-145
• /
• 2009

An analytical solution of groundwater flow is applied to design soil vacuum extraction for removing volatile organic compounds from the unsaturation zone. The governing equation of gas or vapor flow in porous media is nonlinear in that gas density depends on gas pressure. A linear equation suggested by researcher is similar to that of groundwater flow. The pressure drawdowns of confined and leaky aqufiers are calculated using Massmann's field data, and the pressure drawdowns are compared. A solution of Theis equation calculated by Massmann is modified using GASSOLVE9 program in this paper. The pressure drawdown using Hantush's analytical solution for leaky aquifer also compared to that of Massmann. Hantush's analytical solution gives good approximations to pressure drawdown.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.250-254
• /
• 2003

본 연구에서는 여러가지 해석해를 이용하여 균열암반 대수층에서 얻어진 양수시험자료를 해석하였다. 균열암반 대수층의 수리적 특성을 연구해 본 결과, 1.3차원에서 2.9차원까지 다양한 분포 차원을 나타나며, 양수시험 자료중 52%에 해당하는 자료가 1차원과 2차원 사이의 분할 유동차원을 보여준다. 이에 대하여 6.3%만이 Theis 이론에 맞는 2차원의 방사상 흐름을 보여준다 2∼3차원의 대수층이 암반대수층에서 나타나기는 어려우며, 만약 2차원 이상으로 해석되는 경우는 다른 방향으로 해석하는 것도 검토해야 한다. 즉, Leaky, constant head boundary, no flow boundary 등을 고려해야 한다.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2004.10a
• /
• pp.27-28
• /
• 2004

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.24-31
• /
• 2000

Soil air permeability and influence of radius in air injection/extraction tests were estimated. These are important factors in the determination of optimal design for SVE or bioventing system. For evaluation of the effects of air leakage from the ground surface on those factors, Theis (1935) and Hantush (1960) methods were used in the data analysis. The air permeability of the studied area was in the range of 1.64$\times$$10^{-7}$~5.66$\times$$10^{-6}$ $\textrm{cm}^2$, and this result would be used for the design of SVE or bioventing system.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.493-496
• /
• 2003

이 연구는 우리나라 균열암반 대수층의 수리적 특성을 해석ㆍ평가하기 위하여 양수시험 해석해(Theis, 1935; Cooper-Jacob, 1946; Papadopulos-Cooper, 1967; Hantush, 1962a,b; Moench, 1985; Hantush-Jacob, 1955) 및 일반화 방사상 유동 모델을 이용하여 균열암반 대수층(화강암, 화산암, 변성암, 백악기퇴적암, 제3기 퇴적암에 굴착된 100개 조사공)에서 수행되어진 양수시험으로부터 얻은 122개의 양수시험자료(수위강하 자료)를 분석하였다. AQTESOLV 전산프로그램을 이용한 양수시험자료 분석에 의하면, 122개 자료중 86개(71%)의 자료들이 이 연구에 사용된 해석해와 일치하며, 양수시험자료 해석해 중에 누수(leaky) 및 경계조건(boundary condition)을 고려한 해석해들이 53개(43%)로 가장 많이 나타났다. 그러므로, 양수시험자료의 해석은 균열암반 대수층의 수리지질학적 특성에 적합한 개념모델의 설정이 중요하다. 일반화 방사상 유동(GRF)모델을 적용해보면, 122개의 자료중 77개(63%)의 자료들이 Barker(1988)의 표준곡선에 의한 차원(1.1차원-2.9차원)을 보여준다. 이중 44.2%에 해당하는 39개 자료가 1.1차원과 1.9차원 사이의 분할 유동차원을 보여주는 반면에 26개(6.5%)만이 Theis 이론에 맞는 2차원의 방사상 흐름을 보여주며, 38개(49.3%)는 2.1차원에서 2.9차원에 속한다. 따라서 우리나라 균열암반 대수층에서 지하수 유동은 대부분 분할차원의 유동을 보여주는 것으로 평가된다.

• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.219-229
• /
• 1994

Since groundwater flow in fractured rocks is controlled by the distribution of fractures irregu1arly developed in space, it is not possible to understand the hydraulic characteristics of fractured aquifers using Theis equation which is applicable only to homogeneous isotropic confined aquifer. This study deals with the theoretical background of the fractal groundwater flow model with leakage, the methodology of calculation of the hydraulic parameters, and the application of the developed model to field data. From the result of the application of the fractal model to two field data in Hongcheon and Yusung areas, we obtained a good match between theoretical curves and observed curves, with the same hydraulic parameters at the pumping well and the observation well. In the two pumping test analyses, we have determined 1.9 of the fractal dimension. This means that the dimension of groundwater flow at these two sites is slightly smaller than radial flow.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.177-185
• /
• 2005

Data from 122 pumping tests were obtained from 100 boreholes in granites, volcanic rocks, metamorphic rocks, and Cretaceous and Tertiary sedimentary rocks, and then were analyzed using AQTESOLV. Results from 86 of the 122 tests ($71\%$) have an analytical solution corresponding to Theis (1935), Cooper-Jacob (1946), Papadopulos-Cooper (1967), Hantush (1962), Moench (1985), or Hantush-Jacob (1955), whereas the remaining 36 results ($29.5\%$) do not correspond to any of the analytical methods. Of the 86 results, only 17 match the Theis and Cooper-Jacob methods, indicating that the basic methods fer pumping test analysis are useful far only $14\%$ of the total data. This suggests that analytical solutions derived using leaky boundary conditions are appropriate for the analysis of pumping test data in fractured aquifers in this study. Furthermore, the results show the importance of carefully selecting an appropriate model for the analysis of pumping test data. Results from the 122 pumping tests were also analyzed using the GRF model. Using the Barker method, the results show that 77 of the 122 tests ($63\%$) have dimensions ranging between 1.1-2.9. Of these 77 solutions, ($39(44.2{\%})$) have a fractional dimension of 1.1-1.9, ($26(6.5{\%})$) show 2-dimensional radial flow also applicable to the Theis method, and ($38(49.3{\%})$) have dimensions of 2.1-2.9. The results show that groundwater flows according to a fractional flow dimension in fractured aquifers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.2
• /
• pp.38-45
• /
• 1995

The diagnosis and monitoring system of abnormal cutting condition is necessary to realize precision machining proces and factory automation, which are final goal of metal cutting in order to develop this system, theimage processing technique has been investigated in machining process. In theis paper, the measurement system of tool wear using computer vision is designed to detect the wear pattern by non-contact and direct method and get the realiable wear information about cutting tool. We measured the area of the side and front part of the diamond core dril which is used in 40kHz ultrasonic vibration machine.