• 한국전자파학회논문지
• /
• 제16권12호
• /
• pp.1222-1228
• /
• 2005

본 논문은 MWO(Microwave Oven)의 동작 주파수로 사용되는 2.45 GHz 대역에서, 전자파 잔향실 내의 전기장특성 향상 및 시험 공간 확장에 관한 연구이다. 잔향실 내부에서의 전자기장 균일성을 확보하기 위하여, Sch-roeder 방식의 Quadratic Residue 확산기(diffuser)를 사용하였고, 전자기장 분포 해석을 위해 FDTD(Finite Difference Time Domain) 수치 해석 방식을 이용하였다. 잔향실 내부의 확산기는 도체로만 설계된 것(Type 1)과 유전체 및 도체를 같이 사용한 것(Type 2, 3)으로 설계하였다. 해석 결과 유전체를 사용한 확산기는, 유전체 없는 확산기의 전기장 특성을 유지하면서 확산기의 물리적 크기를 줄일 수 있었고, 특히 Type 3 확산기에서는 동일한 물리적 공간에 더 많은 주기의 확산기를 설계할 수 있어, 시험 공간 확장, 잔향실의 편파 특성, 편차 및 공차등의 성능이 가장 좋은 것을 확인하였다.

• 한국광학회지
• /
• 제10권4호
• /
• pp.342-347
• /
• 1999

광소자의 소형화와 집적화 노력에 따라 광도파로의 도파폭과 곡률 반경이 작아지면서, 그 경계조건을 만족하는 도파모드와 전파상수의 변화가 심하게 되었다. 특히, 도파폭의 좁아지면서 제작 공정상의 폭조절 오차한계 내의 작은 변화에도 전파상수가 크게 변화하게 되어, 배열도파로(Arrayed Waveguide Grating, AWG)소자에서는 각 도파로 진행광의 위상이 설계와 심하게 달라지고 소자의 성능에 영향이 커지게 되었다. 광소자의 소형화에 따라 심각해지는 이러한 근사설계 오차에 의한 영향을 정량적으로 분석하고 대처하기 위해, 여기서는 유효굴절률법(Effective Index Method)과 해석적 함수해(Analytic Solution Method)를 이요하여 여러 도파로 구조를 해석하여 전파특성 변수를 얻어내었다. 또한, 이를 적용하여 자체 제작한 고기능 전산시늉기를 통해 각종 InP-, Silica-AWG 소자의 성능을 모사하였다. 모사 결과는 실제 제작된 전형적인 소자와 비교하여 매우 유사한 경향을 나타내었으며, Ridge-type Inp-AWG 소자의 경우, 도파폭의 허용공차가 0.02$\mu\textrm{m}$ 이내로 개선될 때, AWG 소자의 신호대잡음비(SNR)가 약 -25dB 이상 가능하게 되며 Rib-type Silica-AWG 소자의 경우는 도파폭 허용공차가 0.1$\mu\textrm{m}$ 정도이기만 해도 약 -30dB 이상 가능한 것으로 모사되었다.

• Elastomers and Composites
• /
• 제41권3호
• /
• pp.194-204
• /
• 2006

본 연구에서는 카본블랙 충전제의 입자크기 및 구조에 따른 고무 배합물의 마찰 마모 특성을 고찰하였다. 카본블랙의 입자크기와 구조에 따라 마모속도 및 형상이 다르게 되며, 최적 마모성능을 설계하기 위해서는 충전제의 입자크기와 구조의 마모 영향도를 사용조건에 따라 고려하여야 한다. 충전제의 입자크기와 구조에 따른 마모속도($W_R$) 영향도를 수준별로 고찰하기 위해 본 연구에서는 구조와 입자크기가 다른 10가지의 카본블랙을 선택하여 동일한 양을 천연고무와 배합하였다. 자체 제작한 칼날형 마찰 마모 시험기를 이용하여 마찰 마모 특성을 평가하였고, 카본블랙의 입자크기와 구조의 영향을 고려한 특성인자(${\psi}=\sqrt{{N_2^2}+{DBP^2}}$)와의 관계를 고찰하였다. 마모속도($W_R$)와 마찰일($W_f$)의 간에는 power-law 관계가 있었으며, 마모속도는 카본블랙의 특성인자에 역비례 관계를 보였다. 이는 카본블랙의 입자 크기가 작고 구조가 잘 발달 될수록 마모 저항특성은 향상된다는 것을 나타낸다.

• 가정과삶의질연구
• /
• 제20권4호
• /
• pp.149-164
• /
• 2002

The purpose of this study was to identify the types of social networks of urban housewives according to different network composition patterns and to analyze the structural and functional characteristics of identified types. The data used in this study were collected from 589 full-time housewives residing in Taejeon city. The major findings are as follows: 1) The social networks of housewives in urban nuclear families were classified into eight types: the kin network, the non-kin network, the kin-centered network, the friend-centered network, the neighbor-centered network, the associate-centered network, the parallel network, and the decentralized network. 2) The structual characteristics (size, density, homogeneity, duration, proximity, frequency, closeness, direction) varied according to the type. The kin network type and the non-kin network type showed extreme degrees in network characteristics. The parallel network type and the decentralized network type showed an average level of network characteristics. The kin-, friend-, neighbor-, and the associate-centered types showed network characteristics of an intermediate level between the single-category types and the decentralized type. 3) The average levels of function of social network types were different in only two(service support, interference) of the six function areas(emotional support, service support, material support, information support, social companionship support, interference). The average level of service support by the non-kin network type was higher than other types. The average level of interference by the kin-centered network type was higher than other types, and that of the neighbor-centered network type was lower than other types. On the other hand, the total amount of function performance of social network types was different in all function areas. The total amount of social support given by the decentralized network type was greater than the other types. The total amount of interference given by the non-kin network type was smaller than the other types.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.54-61
• /
• 2007

The purpose of this study was to investigate the spatial characteristics of residential and nursing units in large skilled nursing facilities for the elderly that were located in city areas, and to discuss the way for efficient unit care. For collecting the data, the researcher visited 6 facilities to make explorations and to interview the staff concerned. Most of the research facilities had systematic residential units that each unit basically had elderly private rooms and the spaces for small group. The number of elderly residents per unit was appropriate for the limit which was suggested by Kwon(2002), but the sizes of small group spaces were smaller than the standard limit($1.62m^{2}$ per resident). The nursing units were made up of nursing station, 2-4 residential units, spaces for large group of residents, hair dressing, nurse, living assistants, bathing, storage and etc. Some of them had problem in efficiency of space use because they did not have distinct usage. In conclusion, this study suggests that each floor has one nursing unit including 40 residents maximum and each nursing unit consists of 2-3 residential units that have 20 residents maximum per unit. In each residential unit, the furniture and spaces for efficient unit-care should be arranged, such as TV, dining table, kitchenette, bathroom, and rooms for living assistants. The hall type is better for the small group so that it has a transitional characteristic leading to the public spaces. The large group space needs to have clear usage such as conducting program differentiated from small group, and various furniture such as sofa, TV, table, and etc which encourage the elderly voluntary use.

• 대한방사선기술학회지:방사선기술과학
• /
• 제10권1호
• /
• pp.61-67
• /
• 1987

Authors tested the grid functions with various thickness of acryl phantom, radiation field size and diameter of shielding lead. The results are as followed: 1. The characteristic values of grid are affected by phantom thickness, but free from radiation field size in the diagnostic useful range. 2. The quantity of scattered radiation was decreased according to the diameter of shielding lead under 20mm, and then the diameter the smaller the better, in accordance with proposed KS standard. 3. The quantity of primary radiation was increased a little at the 80mm diameter radiation field size, but did not have much differences. Therefore, it was thought that it is needed to limit beam size in case of absolute values in accordance with any standards, but it has no matter to use 100 mm diameter in case of relative values just to campare with.

• Journal of the Korean Data and Information Science Society
• /
• 제26권6호
• /
• pp.1207-1216
• /
• 2015

본 연구는 기업신용평가모형 중 재무모형을 개발하는데 있어 여러 조건들의 기준값을 변화시킴에 따라 모형 성능이 어떻게 달라지는지 확인하고 자료의 특성에 맞는 조건을 제안하는데 목적이 있다. 기준값의 변화에 따른 모형의 성능은 정확도비를 기준으로 측정하고, 반복적인 절차를 간편하게 하기 위해 SAS/MACRO를 활용하였다. 재무비율을 구간에 따라 점수화한 신용평점모형과 유의한 재무비율로 로지스틱 회귀모형을 사용한 부실예측모형으로 구성되는 재무모형에서 기준값의 변화에 따른 성능 비교 결과, 부실예측모형이 신용평점모형보다 좋은 것으로 나타났다. 기업규모에 따른 특성비교에서는 재무제표의 신뢰도가 높고 비재무적인 요소에 영향을 적게 받는 대규모 기업에서 모형의 성능이 좋을 뿐만 아니라 재정학적인 의미가 뛰어난 통계모형이 만들어지는 것을 확인할 수 있었다. 규모가 작아질수록 부실예측모형과 신용평점모형의 성능 차이가 커지는 것과 이상값이 많아져서 모형의 안정성이 떨어지는 것을 알 수 있었다.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권4호
• /
• pp.435-439
• /
• 2000

Records of weight, age, body condition at calving and udder characteristics scores of 425 beef cows and birth weights and periodical weights of their offspring from birth to weaning were analyzed to study the effect of body weight, condition and udder characteristic scores of dams on birth weight and Preweaning growth of their offspring. Dam's body condition (fat reserve) at calving were scored on a scale of 1 to 5 (1=extremely thin and 5=extremely fat) and dam's udder characteristics were scored on a scale of 1 to 7 (l=udder well attached with small teats and 7=at least one quarters not functional). Dams were from three distinct breed groups and were mated in single sire mating groups within each breed group for 45 days. Within each breed group and year, the dams were classified into high, medium and low based on their weights at the time of parturition. The data were analysed using covariance analysis. In general, calves born to heavier dams were heavier at birth and had higher rate of Preweaning growth. The effect of dam's body condition score on the calf birth weight was not significant. However, cows with average body condition score of 2.5 or 3.0 gave birth to calves that had higher pre weaning growth rates up to weaning than those born to calves with higher body condition score. The udder characteristics score did not affect calf birth weight as expected; however, cows with udder score of 3 (udder well attached with large teats) produced calves with higher preweaning growth rate than those with smaller teats. Based on the results, it can be concluded that maintaining animals with average body condition and weight would result in more efficient calf production. In addition, cows with well attached udder and large teats would provide a better maternal environment for Preweaning growth rates of their calves.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2014

Liquefied petroleum gas (LPG) is regarded as an alternative fuel for spark ignition engine due to similar or even higher octane number. In addition, LPG has better fuel characteristics including high vaporization characteristic and low carbon/hydrogen ratio leading to a reduction in carbon dioxide emission. Recently, development of LPG direct injection system started to improve performance of vehicles fuelled with LPG. However, spray characteristics of LPG were not well understood, which is should be known to develop injector for LPG direct injection engines. In this study, effects of operation condition including ambient pressure, temperature, and injection pressure on spray properties of n-butane were evaluated and compared to gasoline in a multi-hole injector. As general characteristics of both fuels, spray penetration becomes smaller with an increase of ambient pressure as well as a reduction in the injection pressure. However, it is found that evaporation of n-butane was faster compared to gasoline under all experimental condition. As a result, spray penetration of n-butane was shorter than that of gasoline. This result was due to higher vapor pressure and lower boiling point of n-butane. On the other hand, spray angle of both fuels do not vary much except under high ambient temperature conditions. Furthermore, spray shape of n-butane spray becomes completely different from that of gasoline at high ambient temperature conditions due to flash boiling of n-butane.