• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.451-459
• /
• 2011

In this paper, a software release model is presented to determine the optimum testing time with consideration of software error type. The software errors are classified into two types, major and minor errors. The software testing is continued until the Nth major error is discovered and corrected. The total cost needed before and after testing time is modeled under nonhomogeneous Poisson error correction model. Numerical examples are presented to demonstrate the results.

• The Journal of Korean Association of Computer Education
• /
• v.19 no.1
• /
• pp.101-109
• /
• 2016

Designing algorithms is a very important learning process in computational thinking education because it requires learner's logical and procedural thinking. But the case studies that have topics of algorithms learning and students' types of errors in learning algorithms are not enough. So the purpose of this study is to analyze students' errors that discovered in the process of learning three control structures of programming using flowchart and provide types of errors in designing algorithms. Results about tests of three types of control structures in university student's algorithms learning class showed different cases of types of errors; types of sequential control error are not presented in the class, types of conditional control error are presented in the case of setting the conditions of nested conditional control, and types of iterative control are showed in the many cases of iterative conditions, statements of single and nested iterative control structure. The results of study will be a good case study about teaching designing algorithms of computational thinking education in elementary, secondary school and university.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.1-9
• /
• 2003

To predict the powering performance of full scale ships from the towing tank tests, resistance, propeller open water and self-propulsion tests are conducted. Model tests inevitably include the experimental error defined as the sum of two types of uncertainties, bias and precision errors. The induced errors in each element of model test are propagated through various routes and correlated with one another. The correlation coefficients are very important in the uncertainty analysis. The coefficient gives a direction(increase or decrease) for a value of error in individual elements. If the coefficient is not used accurately, the error bounds of the individual elements are overestimated or underestimated. In this study, the new methodology is applied to the uncertainty analysis of HMRI's towing tank tests, thus error bounds of each element is suggested and verified by several repetitive experiments.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1775-1780
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of an epicyclic gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.65-74
• /
• 2021

Recently, studies on Korean spelling correction have been actively conducted based on machine translation and automatic noise generation. These methods generate noise and use as train and data set. This has limitation in that it is difficult to accurately measure performance because it is unlikely that noise other than the noise used for learning is included in the test set In addition, there is no practical error type standard, so the type of error used in each study is different, making qualitative analysis difficult. This paper proposes new 'error type classification' for deep learning-based Korean spelling correction research, and error analysis perform on existing commercialized Korean spelling correctors (System A, B, C). As a result of analysis, it was found the three correction systems did not perform well in correcting other error types presented in this paper other than spacing, and hardly recognized errors in word order or tense.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.231-241
• /
• 2013

In recent years, accident induced by human error is increasing in the chemical plant. Human error analysis of the chemical plant was conducted on the basis of past accident. Some company called by A for the basis of a chemical accident. Factor analysis of human errors was separated in plant operation and work. Agency's work of occupational safety & health was classified into four types. It is based on the work before, during work, recovery work, and discontinue work. It was still separated work of human error by analysis and then was derived factor and issue. The human error factor and priority for accident prevention in the chemical plant is presented.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2669-2671
• /
• 2000

In this paper, a new model error following sliding mode control is considered with a novel sliding surface for the error. This novel sliding surface has nominal dynamics of an original state of the error system and makes it possible that the Sliding Mode Control(SMC) technique for the error of the model following is used with the various types of controllers. Its design is based on the augmented system whose dynamics have a higher order than that of the original error system. The reaching phase is removed by using an initial virtual state which makes the initial error state sliding function equal to zero.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.9-16
• /
• 2013

Objective: The aim of this study is to investigate a trend of human error types observed in a series of verification and validation experiments for an Advanced Control Room(ACR) equipped with Lager Display Panel(LDP), Work Station Flat Panel Display(WS FPD), list type Alarm System(AS), Soft Control(SC) and Computerized Procedure System(CPS). Background: Operator behaviors in a fully computerized control room are quite different from those in a traditional hard-wired control room. Operators in an ACR all together monitor plant status and variables through their own interface system such as LDP and WS FPD, are notified of abnormal plant status through their own list type AS, control the plant through their own SC, and follow the structured procedure through their own CPS whereas operators in a traditional control room only separately do their duty directed by their supervisor. Especially the secondary task such as manipulating the user interface of ACR can be an extra burden to all the operators including the supervisor. Method: The Reason's human error classification method was applied to operators' behavioral data collected from a series of verification and validation experiments where operators showed their plant operational behaviors under a couple of harsh scenarios using the ACR simulator. Results: As operators accustomed to the new ACR system, knowledge or rule based mistakes appearing frequently in the early series of experiments decreased drastically in the latest stage of the series. Slip and lapse types of errors were observed throughout the series of experiments. Conclusion: Education and training can be one of the most important factors for the operators accustomed to the traditional control room to be adapted to the new system and to run the ACR successfully. Application: The results of this study implied that knowledge or rule based mistakes can be reduced by training and education but that lapse type errors might be reduced only through innovative improvement in human-system interface design or teamwork culture design including a new leadership style suitable for ACR.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.1
• /
• pp.23-47
• /
• 2017

The purpose of this study is to analyze the types of errors that may occur in the four arithmetic operations of the fractions after classified according to the level of academic achievement for sixth-grade elementary school student who Learning of the four arithmetic operations of the fountain has been completed. The study was proceed to get the information how change teaching content and method in accordance with the level of academic achievement by looking at the types of errors that can occur in the four arithmetic operations of the fractions. The test paper for checking the type of errors caused by calculation of fractional was developed and gave it to students to test. And we saw the result by error rate and correct rate of fraction that is displayed in accordance with the level of academic achievement. We investigated the characteristics of the type of error in the calculation of the arithmetic operations of fractional that is displayed in accordance with the level of academic achievement. First, in the addition of the fractions, all levels of students showing the highest error rate in the calculation error. Specially, error rate in the calculation of different denominator was higher than the error rate in the calculation of same denominator Second, in the subtraction of the fractions, the high level of students have the highest rate in the calculation error and middle and low level of students have the highest rate in the conceptual error. Third, in the multiplication of the fractions, the high and middle level of students have the highest rate in the calculation error and low level of students have the highest rate in the a reciprocal error. Fourth, in the division of the fractions, all levels of students have the highest r rate in the calculation error.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.66-72
• /
• 2018

This study analyses the types, related operations, facilities, and causes of chemical accidents in Korea based on the RISCAD classification taxonomy. In addition, human error analysis was carried out employing different human error classification criteria. Explosion and fire were major accident types, and nearly half of the accidents occurred during maintenance operation. In terms of related facility, storage devices and separators were the two most frequently involved ones. Results of the human error-based analysis showed that latent human errors in management level are involved in many accidents as well as active errors in the field level. Action errors related to unsafe behavior leads to accidents more often compared with the checking behavior. In particular, actions missed and inappropriate actions were major problems among the unsafe behaviors, which implicates that the compliance with the work procedure should be emphasized through education/training for the workers and the establishment of safety culture. According to the analysis of the causes of the human error, the frequency of skill-based mistakes leading to accidents were significantly lower than that of rule-based and knowledge based mistakes. However, there was limitation in the analysis of the root causes due to limited information in the accident investigation report. To solve this, it is suggested to adopt advanced accident investigation system including the establishment of independent organization and improvement in regulation.