• 제목/요약/키워드: The tension of body

검색결과 288건 처리시간 0.025초

평판형 전개판의 3차원 운동 모델링 (Modeling of flat otter boards motion in three dimensional space)

  • 최무열;이춘우;이건호
    • 수산해양기술연구
    • /
    • 제43권1호
    • /
    • pp.49-61
    • /
    • 2007
  • Otter boards in the trawl are the one of essential equipments for the net mouth to be spread to the horizontal direction. Its performance should be considered in the light of the spreading force to the drag and the stability of towing in the water. Up to the present, studies of the otter boards have focused mainly on the drag and lift force, but not on the stability of otter boards movement in 3 dimensional space. In this study, the otter board is regarded as a rigid body, which has six degrees of freedom motion in three dimensional coordinate system. The forces acting on the otter boards are the underwater weight, the resistance of drag and spread forces and the tension on the warps and otter pendants. The equations of forces were derived and substituted into the governing equations of 6 degrees of freedom motion, then the second order of differential equations to the otter boards were established. For the stable numerical integration of this system, Backward Euler one of implicit methods was used. From the results of the numerical calculation, graphic simulation was carried out. The simulations were conducted for 3 types of otter boards having same area with different aspect ratio(${\lambda}=0.5,\;1.0,\;1.5$). The tested gear was mid-water trawl and the towing speed was 4k't. The length of warp was 350m and all conditions were same to each otter board. The results of this study are like this; First, the otter boards of ${\lambda}=1.0$ showed the longest spread distance, and the ${\lambda}=0.5$ showed the shorted spread distance. Second, the otter boards of ${\lambda}=1.0$ and 1.5 showed the upright at the towing speed of 4k't, but the one of ${\lambda}=0.5$ heeled outside. Third, the yawing angles of three otter boards were similar after 100 seconds with the small oscillation. Fourth, it was revealed that the net height and width are affected by the characteristics of otter boards such as the lift coefficient.

질 성형을 위한 실리콘 액 주입 후 발생한 급성 호흡 곤란 증후군 1예 (A Case of Acute Respiratory Distress Syndrome Induced by Injection of Silicone Fluid for Colpoplasty)

  • 정창욱;전익수;장재영;박지은;송춘영;김성헌;강경우
    • Tuberculosis and Respiratory Diseases
    • /
    • 제57권2호
    • /
    • pp.193-196
    • /
    • 2004
  • 저자들은 실리콘 액을 이용한 질 성형술 후에 급성호흡 곤란 증후군을 보인 환자에서 경기관지 폐생검으로 실리콘에 의한 것으로 생각되는 폐포 대식세포내의 봉입체를 확인하고 대증적인 치료로 호전된 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

자연치열에 설치한 pivot의 전후방 일치변화에 따른 하악의 moment에 관한 연구 (A STUDY ON THE MANDIBULAR MOMENTS ACCORDING TO ANTERO-POSTERIOR PLACEMENT OF PIVOT ON LOWER NATURAL DENTITION)

  • 이현식;박남수;최대균
    • 대한치과보철학회지
    • /
    • 제31권3호
    • /
    • pp.394-410
    • /
    • 1993
  • This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

  • PDF

스캐너와 산업용 로봇을 이용한 고속 레이저 용접에 관한 연구 (A Study on High Speed Laser Welding by using Scanner and Industrial Robot)

  • 강희신;서정;김종수;김정오;조택동
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2009년 추계학술발표대회
    • /
    • pp.29-29
    • /
    • 2009
  • On this research, laser welding technology for manufacturing automobile body is studied. Laser welding technology is one of the important technologies used in the manufacturing of lighter, safer automotive bodies at a high level of productivity; the leading automotive manufacturers have replaced spot welding with laser welding in the process of car body assembly. Korean auto manufacturers are developing and applying the laser welding technology using a high output power Nd:YAG laser and a 6-axes industrial robot. On the other hand, the robot-based remote laser welding system was equipped with a long focal laser scanner system in robotic end effect. Laser system, robot system, and scanner system are used for realizing the high speed laser welding system. The remote laser welding system and industrial robotic system are used to consist of robot-based remote laser welding system. The robot-based remote laser welding system is flexible and able to improve laser welding speed compared with traditional welding as spot welding and laser welding. The robot-based remote laser systems used in this study were Trumpf's 4kW Nd:YAG laser (HL4006D) and IPG's 1.6kW Fiber laser (YLR-1600), while the robot systems were of ABB's IRB6400R (payload:120kg) and Hyundai Heavy Industry's HX130-02 (payload:130kg). In addition, a study of quality evaluation and monitoring technology for the remote laser welding was conducted. The welding joints of steel plate and steel plate coated with zinc were butt and lapped joints. The quality testing of the laser welding was conducted by observing the shape of the beads on the plate and the cross-section of the welded parts, analyzing the results of mechanical tension test, and monitoring the plasma intensity and temperature by using UV and IR detectors. Over the past years, Trumf's 4kW Nd:YAG laser and ABB's IRB6400R robot system was used. Nowadays, the new laser source, robot and laser scanner system are used to increase the processing speed and to improve the efficiency of processes. This paper proposes the robot-based remote laser welding system as a means of resolving the limited welding speed and accuracy of conventional laser welding systems.

  • PDF

소아청소년 두통 환자에서 비만 유병률 (Obesity Prevalence in Pediatric Headaches)

  • 한아름;신찬옥;조경순;빈중현;정민호;서병규
    • 대한소아신경학회지
    • /
    • 제26권4호
    • /
    • pp.263-268
    • /
    • 2018
  • 목적: 두통과 비만은 모두 소아청소년에서 유병률이 높은 만성 질환이다. 최근 성인뿐만 아니라 소아청소년에서도 두통과 비만의 관련성이 연구되고 있다. 본 연구의 목적은 우리나라 소아청소년 두통 환자에서 비만 유병률을 제시하고 두통 환자의 연령과 성별 및 두통의 형태, 빈도, 강도, 장애 정도에 따른 비만 유병률의 차이를 알아보고자 하였다. 방법: 2015년 1월부터 2018년 3월까지 가톨릭대학교 부천성모병원 소아청소년과 두통 클리닉을 방문한 6세 이상, 18세 이하의 일차두통환자 340명의 의무기록을 후향적으로 조사하였다. 처음 두통클리닉 내원 시 측정한 키와 체중으로 체질량지수를 계산하여 2017년 대한민국 소아청소년 표준성장도표를 이용하여 체질량지수 백분위수를 구하여 비만도를 평가하였으며, 나이, 성별, 키와 체중, 두통의 형태, 빈도, 강도 및 장애 정도에 대한 정보를 수집하였다. 결과: 대상 환자 중 17.6%가 비만이었고 여아에 비하여 남아의 비만 유병률이 높았고 소아 연령과 청소년 연령의 비만 유병률은 차이가 없었다. 두통의 형태, 빈도, 강도, 장애 정도에 따른 비만 유병률의 차이는 없었다. 결론: 본 연구에서 소아청소년 두통 환자의 비만 유병률은 17.6%로 일반 인구(KNHANES, 2013)의 소아청소년 비만 유병률 10%와 비교하여 높았다. 남아의 비만 유병률이 높은 것은 일반 인구와 같았으나 소아 연령의 비만 유병률이 청소년 연령의 비만 유병률이 유사한 것은 일반 인구와는 다른 결과였다. 소아청소년에서 두통과 비만의 관련성에 대한 추가적인 연구가 필요할 것이다.

Flux, Solder 및 Grease 세정용 CFC 대체 비수계 세정제 배합 연구 (Formulation of Alternative Non-Aqueous Cleaning Agents to Chlorofluorocarbon Compounds for Cleaning Flux, Solder and Grease)

  • 정용우;이호열;이명진;송아람;배재흠
    • 청정기술
    • /
    • 제12권4호
    • /
    • pp.250-258
    • /
    • 2006
  • CFC-113과 1,1,1-trichloroethane 등과 같은 CFC 화합물은 화학적 안정성 및 열역학적 특성 등이 우수하고, 불연성이며, 부식성이 없는 화합물로 오랜 시간 동안 전 산업에 걸쳐 널리 사용 되어 왔다. 하지만, 1989년 지구 환경의 보호를 위해 이들의 생산과 사용을 규제하는 국제협약인 '오존층 파괴물질에 관한 몬트리올 의정서'가 체결되어 대체 세정제가 요구되고 있다. 본 연구에서는 세정 시스템을 변화시키지 않고 세정력이 우수하면서 환경 친화적이며 인체 유해도가 낮으며 부식성 물질을 발생 시키지 않는 비수계 세정제를 개발하고자 하였다. 이를 위하여 글리콜 에테르계의 용매와 파라핀계 탄화수소 물질을 일정 비율로 혼합, 배합하면서 실록산을 첨가하여 비수계 세정제를 배합 제조하였다. 그리고 이들 세정제의 물성과 세정성을 평가하여 대체 세정제로서의 가능성을 평가하였다. 배합세정제의 물성측정 결과 밀도와 표면장력이 낮아 오염물에 대한 침투력이 우수할 것으로 예상되었고 인화점과 증기압 측정값으로 세정제의 안전성을 평가할 수 있었다. 플럭스, 솔더 및 그리스에 대한 세정성능 측정결과 높은 세정성능을 보여주었고 피세정물의 표면에 잔류물이 생성되지 않았다. 결과적으로, 규제물질과 동등한 세정능력을 지니며 침투력이 우수하고 인체 유해도가 낮은 세정제를 개발할 수 있었다.

  • PDF

투수성이 높은 화산쇄설층에서 부력앵커 시공을 위한 단일공 차수공법 (C-RJP Grouting)의 적용성에 관한 연구 (A Applicability Study on Single Grouted Column Method (C-RJP Grouting) for Buoyancy-Resistant Permanent Anchor in Highly Permeable Volcanic Clastic Zones)

  • 정용건;채영수;박병희;김정열
    • 한국지반환경공학회 논문집
    • /
    • 제16권8호
    • /
    • pp.5-12
    • /
    • 2015
  • 연구대상은 건축물에 지하부의 이용 극대화 목적으로 지하부의 부력에 대한 부력 저항용 앵커를 고려하였다. 그러나 투수계수가 크고 지하수 유속이 빠른 화산쇄설층에서 앵커 천공부를 통해 지하수가 급격히 유출되어 앵커체 삽입이 불가능하였다. 또한 억지로 삽입된 앵커공에서는 계속적으로 많은 양의 해수와 시멘트가 유출되었으며, 앵커의 일부는 지반에 정착이 되지 않는 현상이 발견되었다. 이러한 문제를 해결하기 위한 지하수 차단방법으로 초고압 분사교반 공법을 적용하였고, 그중 단일공 차수방법을 채택하여 부력방지앵커를 설치하였다. 본 연구에서는 초고압 분사교반 공법을 이용한 단일공 차수방법을 현장에 적용하고 3회에 걸친 시험시공을 통해 본 시공 시험에 적용할 주입재를 결정하였고 투수시험, 코어채취 표준관입시험 일축압축강도시험을 통하여 차수효과 및 지반개량 정도를 확인하였다. 또한 부력방지앵커의 설치 및 인장시험을 통해 앵커의 안정성을 확보하여 화산쇄설층에서 단일 차수공법의 적용성을 검증하였다.

경량 휠체어 탑승자의 차량 전방충돌시 안전성 평가 (A Safety Assessment on Light Weight Wheelchair Occupant in Frontal Crash)

  • 김성민;김성재;강태건
    • 대한의용생체공학회:의공학회지
    • /
    • 제24권1호
    • /
    • pp.15-21
    • /
    • 2003
  • 본 연구에서는 경량휠체어 탑승자의 차량 전방충돌시 안전성 평가를 위하여 동적 슬래드 충격실험을 하였다. 실험은 총 6회 시행하였으며 충격속도는 20g/48 $\pm$2km/h 였고, Hybrid III 50%ile 성인남자 인체모형을 사용하여 두부손상기준(Head Injury Criteria), 목의 굴전모멘트, 축 인장력, 전단력, 흉부 가속도. 두부, 휠체어, 무릎의 전방 쏠림량을 측정하였으며 미국자동차학회 규격인 SAE J2249에서 제안한 동작기준 (Motion Criteria)과 미국 제너럴모터스사의 자체기준(GM-IARV)인 복합상해기준(Combined Injury Criteria)을 이용하여 안전성평가를 하였다. 실험결과는 경량 휠체어 탑승자의 전방 충돌 시 최대 상해치를 100%로 봤을 때 휠체어와 탑승자 거동의 위험도지수 MC는 52%, 탑승자의 상체 위험도지수 CIC는 60.1% 였다.

에너지절감에 의해 감소되는 뉴로에너지의 증강에 관한 연구 (The Study about Improvement of Neuro Energy Decreased by Energy Saving)

  • 김명호;강동식
    • 한국산학기술학회논문지
    • /
    • 제19권6호
    • /
    • pp.715-721
    • /
    • 2018
  • 청각 및 후각의 다감각 자극을 통하여 에너지를 절감하기 위하여 불쾌해진 촉각을 보상함으로써 에너지는 절감하면서 근무자의 뉴로에너지(쾌적성, 집중력, 신체적 및 심리적 안정 등)는 증강시키는 연구를 하였다. 온도 $25[^{\circ}C]$, 상대습도 50[RH%], 조도 1,000[lux] 및 기류 속도 0.02[m/sec]의 항온 항습실에서 1/f의 변동리듬으로 청각을 자극하고 아로마 향기로 후각을 자극하여 실험을 진행하였으며, 접촉식으로 인체의 심리상태를 측정하는 뇌파, 학습능력 및 심박동변이도와 비접촉식으로 심리상태를 측정하는 진동이미지 방법을 사용하였다. 피험자는 신체적으로 활동하는데 지장이 없고, 심신의 안정과 집중력의 최대 상태를 가져오는 상대 ${\alpha}$파(8~13[Hz])의 활성도가 후두엽에서 높은 유형인 20대 대학생 8명(남성 4명, 여성 4명)으로 선정하였다. 측정자세는 쾌적한 열적 환경에서 의자에 착석해 안정을 취하고 있을 때의 활동량으로써 1met로 하였으며, 착의량 상태는 약 0.7clo로 통일하였다. 측정결과 쟈스민 향기와 변동리듬 a=1.106 음원의 다감각자극에서 감성 및 심신안정과 집중력이 가장 높아졌으며, 상대$M{\alpha}$파와 상대$M{\beta}$파가 각각 70.49[%], 89.72[%] 증가하였고, HRT는 38.09[%] 감소하였으며, 피로도와 긴장 불안은 각각 36.85[%], 15.54[%] 감소하였다.

Moire 영상을 이용한 근골격계 질환의 한의학적 진단에 관한 연구 (A Study on Oriental Medical Diagnosis of Musculoskeletal Disorders using Moire Image)

  • 이은경;유승현;이수경;강성호;한종민;정명수;천은주;송용선;이기남
    • 대한예방한의학회지
    • /
    • 제4권2호
    • /
    • pp.72-92
    • /
    • 2000
  • This research has conducted studies on an Oriental medicine-based method of diagnosing of occupational musculoskeletal system diseases. This researcher has searched through existing relevant medical literature. Also, this researcher has worked on a moire topography using moire topography. In this course, this researcher has reached the following conclusion in relation to the possibility of using a moire topography as a diagnosing device of musculoskeletal system diseases under Oriental medicine . 1 The Western medicine outlines its criteria of screening occupational musculoskeletal system diseases as follows A. The occupational musculoskeletal diseases must clearly include one or more of the subjective symptoms characterized by pain, hypoesthesia dysaesthesia, anaesthesia. etc . B, There should be clinically admitted objective observations and diagnosis outlining that the disease concerned shows symptoms such as tenderness, induration. and edema that can appear with occupational musculoskeletal system diseases. dyscinesia should be admitted with the disease concerned, or there should be observations and diagnosis outlining that abnormality exists in electric muscular or nervous diagnosis and examination . C. It should be admitted that prior to the occurrence of symptoms or observations and diagnosis on musculoskeletal system-related diseases, a patient has been engaged in works with conditions requiring improper work posture or work movement. That is, this is an approach whereby they see abnormality in the musculoskeletal system come from material and structural defect, and adjust and control abnormality in the musculoskeletal system and secreta . 2. The Oriental medicines sees that a patient develops the pain of occupational musculoskeletal diseases as he cannot properly activate the flow of his life force and blood thus not only causing formation of lumps in the body and blocking the flow of life force and blood in some parts of the body. Hence, The Oriental medicine focuses on resolving the cause of weakening the flow of life force and blood, instead of taking material approach of correcting structural abnormality Furthermore , Oriental medicine sees that when muscle tension builds up, this presses blood vessels and nerves passing by, triggering circulation dyscrasia and neurological reaction and thus leading to lesion. Thus, instead of taking skeletal or neurophysiological approach. it seeks to fundamentally resolve the cause of the flow of the life force and blood in muscles not being activated. As a result Oriental medicine attributes the main cause of musculoskeletal system diseases to muscle tension and its build-up that stem from an individual's long formed chronicle habit and work environment. This approach considers not only the social structure aspect including companies owners and work environment that the existing methods have looked at, but also individual workers' responsibility and their environmental factors. Hence, this is a step forward method. 3 The diagnosis of musculoskeletal diseases under Oriental medicine is characterized by the fact that an Oriental medicine doctor uses not only photos taken by himself, but also various detection devices to gather information and pass comprehensive judgment on it. Thus, it is the core of diagnosis under Oriental medicine to develop diagnosing devices matching the characteristics of information to be induced and to interpret information so induced from the views of Oriental medicine. Diagnosis using diagnosing devices values the whole state of a patient and formal abnormality alike, and the whole balance and muscular state of a patient serves as the basis of diagnosis. Hence, this method, instead of depending on the information gathered from devices under Western medicine, requires devices that provide information on the whole state of a patient in addition to the local abnormality information that X-ray. CT, etc., can offer. This method sees muscle as the central part of the abnormality in the musculoskeletal system and thus requires diagnosing devices enabling the muscular state. 4. The diagnosing device using moire topography under Oriental medicine has advantages below and can be used for diagnosing musculoskeletal system diseases with industrial workers . First, the device can Provide information on the body in an unbalanced state. and thus identify the imbalance and difference of height in the left and right stature that a patient can not notice at normal times. Second, the device shows the twisting of muscles or induration regions in a contour map. This is not possible with existing shooting machines such as X-ray, CT, etc., thus differentiating itself from existing machines. Third, this device makes it possible for Oriental medicine to take its unique approach to the abnormality in the musculoskeletal system. Oriental medicine sees the state and imbalance state in muscles as major factors in determining the lesion of musculoskeletal system, and the device makes it possible to shoot the state of muscles in detail. In this respect, the device is significant. Fourth, the device has an advantage as non-aggression diagnosing device.

  • PDF