• 한국자기학회지
• /
• 제20권3호
• /
• pp.94-99
• /
• 2010

사각판재형 강재의 마이너 B-H 곡선은 Labview프로그램과 측정 장치를 이용하여 공극 보정과 함께, B-H 곡선의 측정을 바탕으로 3차원 유한요소법으로 구하였다. 측정방법은 1차, 2차 권선이 감긴 고투자율의 페라이트 자심을 철판 위에 두고 폐자로를 구성한 후, 페라이트 자심의 자계와 자속밀도 측정을 바탕으로 하는 것이다. 이 때, 자심과 철판 사이의 미세한 공극의 영향은 최소자승법의 2차 다항식으로 보정하였다. 해석방법은 측정된 기자력과 자속밀도를 해석치와 비교하는 방법을 이용하였다. 이 측정방법은 고장력 강판의 자기저항이 페라이트 자심의 자기저항보다 커다는 가정 하에서는 이용될 수 있다. 그러나 페라이트 자심의 자속밀도가 포화에 가까워지게 되면 페라이트 자심의 투자율이 감소하게 되므로 높은 자속밀도에서 B-H 루프를 정확하게 측정할 수 없었다. 따라서 본 실험에서는 자계가 약 520 A/m, 자속밀도가 0.15 T의 범위에서 사각판재형 강재의 B-H 곡선을 구할 수 있었다.

• 한국자기공명학회논문지
• /
• 제5권1호
• /
• pp.29-36
• /
• 2001

The structures of two VBS (viral binding site) RNAs, SL1 and SL2, of Yeast Saccharomyces cerevisiae vims have been studied by 2D and 3D NMR experiments. VBSs play a crucial role in viral particle binding to the plus strand and packaging of the RNA. The secondary structures of the two VBS RNAs share a common feature of the stem-internal loop-stem-hairpin loop structure although the size of the internal loops of SL1 and SL2 differs. 2D experiments were sufficient for fill assignments of SL1. However, isotope labeling of the sample and multidimensional experiments were required for 28-nucleotide-long SL2 due to the spectral overlap. Several 3D HCCH experiments have accomplished full assignment of SL2 RNA.

• Journal of Applied Biological Chemistry
• /
• 제55권1호
• /
• pp.67-70
• /
• 2012

Plant MYB transcription factors regulate secondary metabolism, cellular morphogenesis, and plant hormone signaling pathway. MYB proteins in plants consist of two repeats of 50 amino acid residues, which are referred to as R2R3 and they interact with WD40 or basic helix loop helix (bHLH) proteins. Yeast two hybrid assay was determined whether rice MYB protein interacts with either OsTTG1, which contains a WD40 domain, or with OsGL3, which contains a bHLH domain. Among 30 OsMYB proteins, three interacted with OsTTG1 and five interacted with OsGL3. A series of MYB mutants were created to determine the MYB domain important for the interaction with OsTTG1 or OsGL3. By using the yeast two hybrid assay, we found that the R3 motif of OsMYB10 and the R2 motif of OsMYB16 were required for interaction with OsTTG1 and OsGL3 proteins, respectively.

• Bioinformatics and Biosystems
• /
• 제2권1호
• /
• pp.17-23
• /
• 2007

Short interfering RNA(siRNA)는 특별한 gene의 발현을 막는데 사용될 수 있고 그 gene의 기능과 치료의 적용에 많은 가능성을 가지고 있지만, 효과적인 siRNA를 디자인하는 방법은 아직까지 명확하지 않다. 효과적인 siRNA는 서열적인 경향을 가지고 있는데 낮은 G/C content, Sense strand의 3' 끝에 적은 안정성과 1번 위치에는 G/C, 19번 위치에는 A/U의 존재 여부를 들 수 있다. 이러한 특성 말고도 최근에는 mRNA의 2차구조가 RNAi 작용에 중요한 역할을 하게 되는데 복잡한 구조(hairpin, multi loop)를 가지고 수소결합을 많이 하여 안정한 상태에 있는 부분은 siRNA의 기능을 크게 줄어들게 한다. 또한, siRNA가 특정한 mRNA에 작동하도록 BLAST 검색을 하여 부작용의 가능성을 배제한다.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.824-833
• /
• 2012

In this paper, a coordinated state-of-charge (SOC) control strategy for the energy storage system (ESS) operating under microgrid islanded mode to stabilize the frequency and voltage was proposed. The proposed SOC control loop is made up of PI controller, which uses a SOC state of the energy storage system as an input and an auxiliary reference value of secondary control as an output. The SOC controller changes the auxiliary reference value of secondary control to charge or discharge the ESS. To verify the proposed control strategy, PSCAD/EMTDC simulation study was performed. The simulation results show that the SOC of the ESS can be regulated at the desired operating range without degrading the stabilizing control performance by proposed coordinated SOC control method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1990년도 특별강연 및 추계학술발표 개요집
• /
• pp.82-86
• /
• 1990

A new method was investigated to measure the high current in resistance welding processes. A measuring unit was developed by using a strain gage attached on the outer surface of a steel ring. The steel ring was placed around a section of the secondary loop of the welding machine, and was deformed by electro-magnetic forces induced by the high welding current. The circumferential constituent of the ring deformation was then used to obtain a signal voltage proportional to the secondary welding current. The strain gage signal of ring deformation is enough to determine the welding current in resistance spot welding, especially when welded with direct current.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.649-656
• /
• 2010

The aim of this study is to investigate the influence of the secondary fluid flow rate through GLHX on a GSHP system with vertical single U-tube type GLHXs. The COP of a GSHP system with large flow rate was lower than it with small flow rate due to large power consumption of ground loop circulating pump. It is suggested that the heat pump unit with high COP and low flow rate through the GLHX have to be selected in order to enhance the performance of the system and reduce the length of GLHX.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.70-71
• /
• 2005

It was an idea to develop a system to remove the contaminated hot particulate to make clean nuclear research facilities to the clear visibility for researcher. In order to clean micron and sub micron size particulates from used PFC solution as a decontamination tool. Since PFC solution is very expensive so it was a high recommendation to develop the some filtration equipment to purify PFC for next decontamination process, in additionally, reduce the secondary waste. However, we developed an easy and economic filter system to purify the PFC solution. The major advantage of the process operates in closed loop under near ambient conditions, thus minimizing the potential for fugitive TRU emissions and reduces the secondary waste. This has very significant safety and cost impacts. Here we proposed the two types PFC filter systems.

• Journal of Plant Biology
• /
• 제27권1호
• /
• pp.15-24
• /
• 1984

Leaf venation of 12 species of Lauraceae in Korea, native or introduced, was investigated and described by the use of Soft X-Ray. They could be grouped by the venation types, such as, 1. Actinodromous; Lindera obtusiloba, 2. Acrodromous; Cinnamomum camphora, C. japonicum, C. loureirii, 3. Brochidodromous having strongly developed basal secondary vein; Neolitsea aciculata, N. sericea, 4. Brochidodromous hoving irregulary branched secondary vein; Lindera erythrocarpa, L. glauca, 5. Brochidodromous having weak marginal loop; Machilus thunbergii, M.Japonica, 6. Brochidodromous having typical venation; Iozoste lancifolia, Litsea japonicum. This grouping corresponded with current classifying system at genus level except for genus Lindera, and supported Nakai's system at Tribe level. They also showed a gradual transition from brochidodromous to actinodromous types, but to certify the systematic value of this transition warrented more study. Identifying key for the species could be made by the venation type.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.49-56
• /
• 2008

In order to reduce energy consumption, secondary controlled system has been applied to many types of equipments. In lifting equipments or press machines using hydraulic cylinder, a hydraulic transformer is used as a control component instead of a valve for motion control and a component for recovering potential energy of load. The transformer is a combination of a variable displacement pump/motor as a secondary controlled element and a fixed displacement pump/motor. In this paper the effect of transformer is studied. Multiple closed loop controllers with displacement feedback of variable pump/motor, speed feedback and position feedback of cylinder are used. The efficiency and energy consumption when cylinder is driven up and down is calculated by simulation. Simulation results show that considerable energy saving is achieved by choosing load ratio, circuit type and supply pressure.