• The Korean Journal of Pesticide Science
• /
• v.2 no.2
• /
• pp.102-107
• /
• 1998

The objective was to know if seed potato farmers in Kangwon alpine area control weeds effectively and use herbicides properly to control weeds. Seed potato farmers in Pyongcbang, Hoengsong, and Kangnung have noxious weeds, such as marsh pepper, lambsquarters, barnyard grass, mugwort, asiatic dayflower, hairy carbgrass, ladysthumb, common chickweed, field horsetail, and common purslain, in their farmyard. These are controlled by a combination of physical and chemical weed control methods. However, several weeds such as marsh pepper, field horsetail and, mugwort are poorly controlled by 2-fold amount of several herbicides, including paraquat, pendimethalin, and metribuzin (58% of the answered). Herbicides are not selected and used in a proper manner by seed potato farmers: most of farmers selected herbicides by their experience (51% of the answered) and dealers recommendation (34% of the answered), while only a few farmers of the answered took advantage of the Farmers Handbook for Herbicide Application. In addition, the selected herbicides, including non-registered ones such as paraquat and fluazifop-butyl, are applying three to five years in a succession. With these improper selection and usage of herbicides, sixty-seven percent of the answered farmers have experienced crop damage and seventy-five percent have poisoning. We conclude that a systemic educational program for the proper selection and use of herbicides is needed for seed potato farmers in Kangwon alpine area.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.451-459
• /
• 2005

The protective effects of ethanol extracts from 5 seaweeds on the mutagenic and cytotoxic damage were evaluated. They were separately extracted using ethanol from dried samples at room temperature, and freeze-dried. The inhibition effects on the mutagenicity in Salmonella assay by Ames test and cancer cell inhibitory effect in HeLa cell, MCF-7 cell and SNU -638 cell by MTT assay were assayed. Seaweed fusiforme, sea tangle and green laver showed strong inhibitory effect against 2-nitrofluorene, sodium azide- or 2-anthramine-induced mutagenicities in Salmonella Typhimurium TA 98 and TA 100 at the level of 2.5 mg ethanol extract per plate. Cancer cell inhibitory effect was shown with all of the seaweed extracts. Green laver, sea mustard, sea tangle and seaweed fusiforme showed strong cytotoxicity against HeLa and MCF-7 cells, with inhibiting by $92\~93\%$ and $89\~92\%$, respectively. These data show that 5 seaweeds tested in this study might be potent functional foods for cancer prevention, and consumption of these seaweeds in adequate amount is recommended.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.80-88
• /
• 2013

Carrot (Daucus carota L. var. sativa) is one of the most extensively used vegetable crops in the world and a significant source of nutrient because of its high content of ${\beta}$-carotene, well known as the precursor of vitamin A carotenoid. However, seed-hairs generated and elongated from the epidermal cell of seeds inhibit absorption and germination by various factors such as carotol and so on. Accordingly, mechanical hair removal process is essential before commercialization of carrot seeds. Because of this process, producers will have additional losses such as time consuming, manpower, capital and so on. Furthermore, physical damage of seeds causes irregular germination rate. To overcome such cumbersome weaknesses, new breeding program for developing hairless-seed carrot cultivar has been needed and studies for molecular markers related to seed-hair characteristic is needed for a new breeding program. Therefore, in this study, cDNA libraries from seeds of short-hair seed phenotype CT-SMR 616 OP 659-1 line, hairy-seed phenotype CT-SMR 616 OP 677-14 line and short-hair seed phenotype CT-ATR 615 OP 666-13 line, hairy-seed phenotype CT-ATR 615 OP 671-9 were constructed, respectively. Furthermore, 1,248 ESTs in each line, total 4,992 ESTs were sequenced. As a result, 19 SNP sites and 14 SNP sites in each of 2 combinations were confirmed by analyzing these EST sequences from short-hair and hairy-seed lines. Then we designed SNP primer sets from EST sequences of SNP sites for high resolution melting (HRM) analysis. Designed HRM primers were analyzed using hairy seed phenotype CT-SMR 616 OP 1040 line and short-hair seed phenotype CT-SMR 616 OP 1024, 1025, 1026 lines. One set of HRM primers showed specific difference between the melting curves of hairy and short-hair seed phenotype lines. Based on this result, allele-specific (AS) PCR primers were designed for easier selection between hairy-seed carrot and hairless seed carrot. These results of HRM and AS-PCR are expected to be useful in breeding of hairless seed carrot cultivar as a molecular marker.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.737-744
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties during preparation of Yukwa. Protein content of glutinous rice was decreased during soaking time and acid and pH values were increased while contents of lipid and ash were not changed. Particle size distribution showed thate average particle size of 7 days soaking treatment smaller than those of 3 days and starch damage of glutinous rice flour was increased during soaking time. The major flavor components after soaking were found ethyl ester acetic acid, ethanol, 2-butan -ol, 2-methyl 1-propanol, 1-butanol, 3-methyl 1-butanol and 1-pentanol, propanoic acid. Content of acetic acid and butanoic acid were rapidly increased during soaking time. Results for ratio of storage modulus(G') and loss modulus(G') in glutinous rice flour dough indicated $tan{\delta}$ was increased for a while and decreased as frequency increased. G' value was very similar with G' value after steaming which means rubber-like property while G' and G' value were changed after during storage time. Treatment at $-20^{\circ}C$ had the highest hardness for cutting degree of dough. There was no difference in color value between different water contents. Hardness of Bandegi (sheet) was decreased as water content increased and the highest popping value was obtained at 18% of water contents. Adding 3% soaked bean had higher redness value of Yukwa and lower value in yellowness.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.45-79
• /
• 2018

An increase of airplanes and military aircraft operation lead to significant demanding of residential claims by people who live in nearby airports and military bases due to noise, vibration and residential damages caused by aircraft operations. In recent years, a plaintiff has filed a lawsuit against the defendant, claiming the prohibition of using claimant's possessed land as a helicopter landing route, and the Daejeon High Court was in favour of the plaintiff. Although the Supreme Court later dismissed the Appeal Court decision, it is necessary to discuss the case of setting flight prohibited zone. In Japan, the airport noise lawsuits have been filed for a long time, mainly by environmental groups. Unlike the case that admitted residential damages caused by noise, the Yokohama District Court for the first time sentenced a judgment of the prohibition of the flight. This ruling was partially changed in the appellate court and some of the plaintiffs' claims were adopted. However, the Supreme Court of Japan finally rejected such decision from appeal and district courts. Atsugi Base is an army camp jointly used by the United States and Japan, and residents, live nearby, claim that they are suffering from mental damage such as physical abnormal, insomnia, and life disturbance because of the noise from airplane taking off and landing in the base. An administrative lawsuit was therefore preceded in the Yokohama District Court. The plaintiff requested the Japan Self-Defense Forces(hereinafter 'JSDF') and US military aircraft to be prohibited operating. The court firstly held the limitation of the flight operation from 10pm to 6am, except unavoidable circumstance. The case was appealed. The Supreme Court of Japan dismissed the original judgment on the flight claim of the JSDF aircraft, canceled the first judgment, and rejected the claims of the plaintiffs. The Supreme Court ruled that the exercise of the authority of the Minister of Defense is reasonable since the JSDF aircraft is operating public flight high zone. The court agreed that noise pollution is such an issue for the residents but there are countermeasures which can be taken by concerned parties. In Korea, the residents can sue against the United States or the Republic of Korea or the Ministry of National Defense for the prohibition of the aircraft operation. However, if they claim against US government regarding to the US military flight operation, the Korean court must issue a dismissal order as its jurisdiction exemption. According to the current case law, the Korean courts do not allow a claimant to appeal for the performance of obligation or an anonymous appeal against the Minister of National Defense for prohibiting flight of military aircraft. However, if the Administrative Appeals Act is amended and obligatory performance litigation is introduced, the claim to the Minister of National Defense can be permitted. In order to judge administrative case of the military aircraft operation, trade-off between interests of the residents and difficulties of the third parties should be measured in the court, if the Act is changed and such claims are granted. In this connection, the Minister of National Defense ought to prove and illuminate the profit from the military aircraft operation and it should be significantly greater than the benefits which neighboring residents will get from the prohibiting flight of military aircraft.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.67-87
• /
• 1969

1. Objectives and Importance. Many silkworms have been damaged by nuclear polyhedrosis virus diseases thoughout the country every year causing a decease in cocoon production by approximately ten per cent per year. The damage caused by the infections virus has occured in spite of complete disinfection. In this respect, it is well known it is impossible, at the present time, to protect the silkworm from these virus infections through chemical and physical control methods. Therefore, this author has attempted to solve this urgent problem from the view point of heredity and breeding, discovering the different resistances and heritabilities among 120 stains collected from throughout the country, and selecting the ones with highest resistance for the basic materials in the silkworm breeding. 2. Results of work 1) The strains with strong resistance to the nuclear polyhedrosis virus diseases are N$_4$, N$\sub$15/, N$\sub$48/, C$\sub$55/ and Em. the log ED$\sub$50/ values of them vary between 0.799 and 1.611. The susceptible strains are N$\sub$20/, C$\sub$62/, N$\sub$76/, N$\sub$79/ and C$\sub$108/, the log ED$\sub$50/ values of them vary between 5.159 and 7.258. (Reference Table 4) The Japanese strain with a log ED$\sub$50/, value of 3.770 is the strongest, followed by the Chinese strain with a log ED$\sub$50/ value of 3.564. The weakest is the European strain with a log ED$\sub$50/ value of 3.3381. The direction coefficient of the regression equation of the susceptibility varies between 0.1 and 0.6, the uniformness of the resistance of the preserved strains of this country is comparatively low. The hereditary henomena of the resistance of each strain and the conerete method of its application for silkworm breeding main the subjects for later studies. 2) The content of water and ash in silkworm has not been correlated with the capability for resistance to the virus diseases(Reference. Table 8). but it is very significantly correlated with mortality rate (in common reaning). In the case of the silkworms which have just completed the fourth moulting the content of water and ash is not related to the mortality rate. In the case of the silkworms which have just completed the third moulting, however, the water( +0.326) and ash (+0.362) registered a high significance. The ash content in the first ($\div$0.520) and second ($\div$0.386) moults is highly significant but water content in both cases is not significant (Reference Table 7). 3) The No. 205 strain proved to be the best in character among the various F$_1$ hybrids. No. 204 was very good in strength but a little lower in cocoon character than the control. No. 212 was a little low in coccon character and mortality was average, but the cocoon harvest was the best among all the varieties offered for (Reference Table 9). 4), In short, the above mentioned strains which are known to have strong resistance to the virus disease are expected to provide basic data for breeding strong varieties. It is proposed that continued research should be conducted on the characteristics of various strains for a satisfactory preservation of various characteristics.research should be conducted on the characteristics of various strains for a satisfactory preservation of various characteristics.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.127-148
• /
• 2020

The data center is a physical environment facility for accommodating computer systems and related components, and is an essential foundation technology for next-generation core industries such as big data, smart factories, wearables, and smart homes. In particular, with the growth of cloud computing, the proportional expansion of the data center infrastructure is inevitable. Monitoring the health of these data center facilities is a way to maintain and manage the system and prevent failure. If a failure occurs in some elements of the facility, it may affect not only the relevant equipment but also other connected equipment, and may cause enormous damage. In particular, IT facilities are irregular due to interdependence and it is difficult to know the cause. In the previous study predicting failure in data center, failure was predicted by looking at a single server as a single state without assuming that the devices were mixed. Therefore, in this study, data center failures were classified into failures occurring inside the server (Outage A) and failures occurring outside the server (Outage B), and focused on analyzing complex failures occurring within the server. Server external failures include power, cooling, user errors, etc. Since such failures can be prevented in the early stages of data center facility construction, various solutions are being developed. On the other hand, the cause of the failure occurring in the server is difficult to determine, and adequate prevention has not yet been achieved. In particular, this is the reason why server failures do not occur singularly, cause other server failures, or receive something that causes failures from other servers. In other words, while the existing studies assumed that it was a single server that did not affect the servers and analyzed the failure, in this study, the failure occurred on the assumption that it had an effect between servers. In order to define the complex failure situation in the data center, failure history data for each equipment existing in the data center was used. There are four major failures considered in this study: Network Node Down, Server Down, Windows Activation Services Down, and Database Management System Service Down. The failures that occur for each device are sorted in chronological order, and when a failure occurs in a specific equipment, if a failure occurs in a specific equipment within 5 minutes from the time of occurrence, it is defined that the failure occurs simultaneously. After configuring the sequence for the devices that have failed at the same time, 5 devices that frequently occur simultaneously within the configured sequence were selected, and the case where the selected devices failed at the same time was confirmed through visualization. Since the server resource information collected for failure analysis is in units of time series and has flow, we used Long Short-term Memory (LSTM), a deep learning algorithm that can predict the next state through the previous state. In addition, unlike a single server, the Hierarchical Attention Network deep learning model structure was used in consideration of the fact that the level of multiple failures for each server is different. This algorithm is a method of increasing the prediction accuracy by giving weight to the server as the impact on the failure increases. The study began with defining the type of failure and selecting the analysis target. In the first experiment, the same collected data was assumed as a single server state and a multiple server state, and compared and analyzed. The second experiment improved the prediction accuracy in the case of a complex server by optimizing each server threshold. In the first experiment, which assumed each of a single server and multiple servers, in the case of a single server, it was predicted that three of the five servers did not have a failure even though the actual failure occurred. However, assuming multiple servers, all five servers were predicted to have failed. As a result of the experiment, the hypothesis that there is an effect between servers is proven. As a result of this study, it was confirmed that the prediction performance was superior when the multiple servers were assumed than when the single server was assumed. In particular, applying the Hierarchical Attention Network algorithm, assuming that the effects of each server will be different, played a role in improving the analysis effect. In addition, by applying a different threshold for each server, the prediction accuracy could be improved. This study showed that failures that are difficult to determine the cause can be predicted through historical data, and a model that can predict failures occurring in servers in data centers is presented. It is expected that the occurrence of disability can be prevented in advance using the results of this study.

• The Korean Journal of Mycology
• /
• v.7 no.1
• /
• pp.13-73
• /
• 1979

These studies were conducted to investigate nutrient sources and supplementary materials of synthetic compost media for Agaricus bisporus culture. Investigation were carried out to establish the optimum composition for compost of Agaricus bisporus methods of out-door fermentation and peakheating with rice straw as the main substrate of the media. The incidence and flora of harmful organisms in rice straw compost and their control were also studied. 1. When rice straw was used as the main substrate in synthetic compost as a carbon source. yields were remarkably high. Fermentation was more rapid than that of barley straw or wheat straw, and the total nitrogen content was high in rice straw compost. 2. Since the morphological and physico-chemical nature of Japonica and Indica types of rice straw are greatly dissimilar. there were apparent differences in the process of compost fermentation. Fermentation of Indica type straw proceeded more rapidly with a shortening the compost period, reducing the water supply, and required adding of supplementary materials for producing stable physical conditions. 3. Use of barley straw compost resulted in a smaller crop compared with rice straw. but when a 50%, barley straw and 50% rice straw mixture was used, the yield was almost the same as that using only rice straw. 4. There were extremely high positive correlations between yield of Agaricus bisporus and the total nitrogen, organic nitrogen, amino acids, amides and amino sugar nitrogen content of compost. The mycerial growth and fruit body formation were severely inhibited by ammonium nitrogen. 5. When rice straw was used as the main substrate for compost media, urea was the most suitable source of nitrogen. Poor results were obtained with calcium cyanamide and ammonium sulfate. When urea was applied three separate times, nitrogen loss during composting was decreased and the total nitrogen content of compost was increased. 6. The supplementation of organic nutrient activated compost fermentation and increased yield of Agaricus bisporus. The best sources of organic nutrients were: perilla meal, sesame meal, wheat bran and poultry manure, etc. 7. Soybean meal, tobacco powder and glutamic acid fermentation by-products which were industrial wastes, could be substituted for perilla meal, sesame meal and wheat bran as organic nutrient sources for compost media. B. When gypsum and zeolite were added to rice straw. physical deterioration of compost due to excess moisture and caramelization was observed. The Indica type of straw was more remarkable in increase of yield of Agricus bisporus by addition of supplementing materials than Japonica straw. 9. For preparing rice straw compost, the best mixture was prepared by 10% poultry manure, 5% perilla meal, 1. 2 to 1. 5% urea and 1% gypsum. At spring cropping, it was good to add rice bran to accelerate heat generation of the compost heap. 10. There was significantly high positive correlation (r=0.97) between accumulated temperature and the decomposition degree of compost during outdoor composting. The yield was highest at accumulated temperatures between 900 and $1,000^{\circ}C$. 11. Prolonging the composting period brought about an increase in decomposition degree and total nitrogen content, but a decrease in ammonium nitrogen. In the spring the suitable period of composting was 20 to 25 days. and about 15 days in autumn. For those periods, the degree of decomposition was 19 to 24%. 12. Compactness of wet compost at filling caused an increase in the residual ammonium nitrogen. methane and organic acid during peak heating. There was negative correlation between methane content and yield (r=0.76)and the same was true between volatile organic acid and yield (r=0.73). 13. In compost with a moisture content range between 69 to 80% at filling. the higher the moisture content, the lower the yield (r=0.78). This result was attributed to a reduction in the porosity of compost at filling the beds. The optimum porosity for good fermentation was between 41 and 53%. 14. Peak heating of the compost was essential for the prevention of harmful microorganisms and insect pests. and for the removal of excess ammonia. It was necessary to continue fer mentatiion for four days after peak heating. 15. Ten species of fungi which are harmful or competitive to Agaricus bisporus were identified from the rice compost, including Diehliomyces microsporus, Trichoderma sp. and Stysanus stemoites. The frequency of occurrance was notably high with serious damage to Agaricus bisporus. 16. Diehliomyces microsporus could be controlled by temperature adjustment of the growing room and by fumigating the compost and the house with Basamid and Vapam. Trichoderma was prevented by the use of Bavistin and Benomyl. 17. Four species of nematodes and five species of mites occured in compost during out-door composting. These orgnanisms could be controlled through peakheating compost for 6 hours at $60^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.3
• /
• pp.103-134
• /
• 1977

The physiological and biochemical role of potassium for upland crops according to recent research reports and the nutritional status of potassium in Korea were reviewed. Since physical and chemical characteristics of potassium ion are different from those of sodium, potassium can not completely be replaced by sodium and replacement must be limited to minimum possible functional area. Specific roles of potassium seem to keep fine structure of biological membranes such as thylacoid membrane of chloroplast in the most efficient form and to be allosteric effector and conformation controller of various enzymes principally in carbohydrate and protein metabolism. Potassium is essential to improve the efficiency of phoro- and oxidative- phosphorylation and involve deeply in all energy required metabolisms especially synthesis of organic matter and their translocation. Potassium has many important, physiological functions such as maintenance of osmotic pressure and optimum hydration of cell colloids, consequently uptake and translocation of water resulting in higher water use efficiency and of better subcellular environment for various physiological and biochemical activities. Potassium affects uptake and translocation of mineral nutrients and quality of products. potassium itself in products may become a quality criteria due to potassium essentiality for human beings. Potassium uptake is greatly decreased by low temperature and controlled by unknown feed back mechanism of potassium in plants. Thus the luxury absorption should be reconsidered. Total potassium content of upland soil in Korea is about 3% but the exchangeable one is about 0.3 me/100g soil. All upland crops require much potassium probably due to freezing and cold weather and also due to wet damage and drought caused by uneven rainfall pattern. In barley, potassium should be high at just before freezing and just after thawing and move into grain from heading for higher yield. Use efficiency of potassium was 27% for barley and 58% in old uplands, 46% in newly opened hilly lands for soybean. Soybean plant showed potassium deficiency symptom in various fields especially in newly opened hilly lands. Potassium criteria for normal growth appear 2% $K_2O$ and 1.0 K/(Ca+Mg) (content ratio) at flower bud initiation stage for soybean. Potassium requirement in plant was high in carrot, egg plant, chinese cabbage, red pepper, raddish and tomato. Potassium content in leaves was significantly correlated with yield in chinese cabbage. Sweet potato. greatly absorbed potassium subsequently affected potassium nutrition of the following crop. In the case of potassium deficiency, root showed the greatest difference in potassium content from that of normal indicating that deficiency damages root first. Potatoes and corn showed much higher potassium content in comparison with calcium and magnesium. Forage crops from ranges showed relatively high potassium content which was significantly and positively correlated with nitrogen, phosphorus and calcium content. Percentage of orchards (apple, pear, peach, grape, and orange) insufficient in potassium ranged from 16 to 25. The leaves and soils from the good apple and pear orchards showed higher potassium content than those from the poor ones. Critical ratio of $K_2O/(CaO+MgO)$ in mulberry leaves to escape from winter death of branch tip was 0.95. In the multiple croping system, exchangeable potassium in soils after one crop was affected by the previous crops and potassium uptake seemed to be related with soil organic matter providing soil moisture and aeration. Thus, the long term and quantitative investigation of various forms of potassium including total one are needed in relation to soil, weather and croping system. Potassium uptake and efficiency may be increased by topdressing, deep placement, slow-releasing or granular fertilizer application with the consideration of rainfall pattern. In all researches for nutritional explanation including potassium of crop yield reasonable and practicable nutritional indices will most easily be obtained through multifactor analysis.