• 제목/요약/키워드: The media installation

검색결과 155건 처리시간 0.025초

건설폐기물을 최소화한 비용 효율적 잔디 블록 기법 개발 및 평가 (Development and Cost-effective Evaluation of Grass Blocks Minimizing Construction Waste)

  • 전민수;홍정선;전제찬;김이형
    • 한국습지학회지
    • /
    • 제19권3호
    • /
    • pp.359-365
    • /
    • 2017
  • 도로 및 주차장과 같은 불투수면은 건기시 중금속과 입자상 물질을 축적하여 강우시 하천 수질을 악화시키는 원인으로 작용하며, 도시의 물순환 체계를 왜곡시킨다. 이에 정부는 최근 인도와 주차장의 불투수면을 투수가 가능한 LID 시설 중 하나인 투수 및 잔디 블록으로 대체하는 정책을 추진 중에 있다. 그러나 불투수면을 투수 및 저류가 가능한 잔디 블록으로 대체할 때 발생하는 건설폐기물은 환경을 오염시킬 뿐만 아니라 공사비용을 증가시킨다. 따라서 본 연구는 건설폐기물을 최소화 할 수 있는 비용 효율적인 주차장 시공방법을 제안하기 위해 수행되었다. 본 연구는 Lab-scale 실험을 통해 기존의 시공방법과 본 연구에서 제안하는 방법에 대한 물순환 능력 및 경제성 등의 비교분석을 수행하였다. 본 연구에서 제안하는 시공방법은 기존 아스팔트 천공, 투수기층재 및 부설층 포설 및 다짐, 노상다짐, 블록 포설, 틈새재 포설 및 다짐의 순이며, Lab-scale 실험 결과 기존 방법과 제안 기법에서 표면유출량, 침투량, 저류량 및 강우유출 지체시간은 큰 차이가 없는 것으로 분석되었다. 반면 폐기물 발생량 및 경제성 평가에서는 본 제안기법이 기존 시공법보다 약 86% 건설폐기물이 적게 발생하며, 이에 따른 비용이 약 70% 절감되는 것으로 나타났다. 본 연구에서 제안하는 시공 방법이 기존 방법과 물순환 효과는 비슷하지만, 시공절차가 용이하고 경제성이 높은 것으로 평가되었다.

한국 대학의 융합학과 설치와 폐과 현황 분석 (A Study on the Installation and Abolition of Convergence Department in University)

  • 오대영
    • 문화기술의 융합
    • /
    • 제10권1호
    • /
    • pp.111-119
    • /
    • 2024
  • 대학의 2019~2023년 융합학과 현황을 한국대학교육협의회 공시자료를 토대로 분석하였다. 융합학과 숫자는 2019년 430개에서 2023년에는 1.7배인 649개로 늘었다. 같은 기간 중 누적폐과수는 177개에서 2.9배인 509개로 늘었다. 융합학과가 급증했지만, 폐과도 매우 많아서 치밀한 준비 없이 급하게 만들어진 융합학과도 많은 것으로 해석되었다. 2022년부터 증가폭이 크게 축소되고, 폐과는 증가해서 융합학과 거품 현상이 꺼지기 시작하였다. 국공립대보다 사립대의 설치가 더 활발하고, 폐과 현상도 심했다. 지역적으로는 설치 증가율에서는 수도권대학이, 누적폐과 증가율에서는 비수도권 대학이 컸다. 매년 공학, 인문사회, 자연과학, 예체능 계열의 순으로 많이 설치되었으나, 공학의 비중은 줄고, 다른 계열은 증가했다. 184개 소계열 가운데 융합학과 설치 소계열은 2019년 65개에서 2023년에는 81개로 증가했다. 우리 대학의 융합교육은 거품이 빠지면서 조금씩 여러 분야로 확산되고 있는 것으로 분석되었다.

Cathodic Protection of Onshore Buried Pipelines Considering Economic Feasibility and Maintenance

  • Choi, Byoung-Yeol;Lee, Sang-Gil;Kim, Jin-Kwang;Oh, Jin-Soo
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제2권4호
    • /
    • pp.158-168
    • /
    • 2016
  • During the installation of crude oil or gas pipelines, which pass through onshore buried pipelines or onshore pipeline from subsea pipeline to onshore plant, countermeasures need to be implemented so as to ensure a sufficient design life by protecting the steel pipes against corrosion. This can be achieved through impressed current cathodic protection method for onshore pipelines and through galvanic sacrificial anode corrosion protection method for offshore pipelines. In particular, in the case of impressed current cathodic protection, isolation joint flanges should be used. However, this makes maintenance control difficult with its installation having a negative impact on price. Therefore, in this study, the most suitable methodology for onshore pipeline protection between galvanic sacrificial anode corrosion protection and impressed current cathodic protection method will be introduced. In oil and gas transportation facilities, the media can be carried to the end users via onshore buried and/or offshore pipeline. It is imperative for the field operators, pipeline engineers, and designers to be corrosion conscious as the pipelines would undergo material degradations due to corrosion. The mitigation can be achieved with the introduction of an impressed current cathodic protection method for onshore buried pipelines and a galvanic sacrificial anode corrosion protection method for offshore pipelines. In the case of impressed current cathodic protection, isolation joint flanges should be used to discontinuity. However, this makes maintenance control to be difficult when its installation has a negative impact on the price. In this study, the most suitable corrosion protection technique between galvanic sacrificial anode corrosion protection and impressed current cathodic protection is introduced for (economic life of) onshore buried pipeline.

전시디자인의 변천과정과 요인에 관한 연구 - 독립기념관의 시기별 전시변화를 중심으로 - (A Study on Transition Process and factor of Exhibition Design - Based on the Exhibition's Transition in the Independence Hall -)

  • 권순관
    • 한국실내디자인학회논문집
    • /
    • 제15권5호
    • /
    • pp.265-272
    • /
    • 2006
  • Traditionally exhibition design as been restricted to architectural, interior, and lighting design, but recently it has begun to overlap into environmental, performance, and installation art. Exhibition design also increasingly involves the application of film, fashion, and the new media. In the past, exhibits were arranged and displayed for the visitor to view directly, but with the development of more effective exhibit media a connection has been created between the exhibit and the visitor. However exhibition design has reached the limits of continuous growth without background theory, when now it must take Into consideration the museum's activation and the importance of the exhibition's design. Exhibition design has developed and grown rapidly since the Taejeon Expo in 1993, but it is a difficult development without a theoretical structure. The flow of exhibition design must be systemized, as the systemization of the transition process of exhibition design has not yet been achieved. This study aims to present an arrangement of exhibition design flow, and to investigate the variation factors in the transition process of exhibition design and exhibit medium development, based on the 18 year history of the Independence Hall that introduced the first systematic planning of an exhibition in 1987.

안드로이드 기반 상호작용 전자게시판 설계 및 구현 (Development of Android Platform based Opened Electronic Board)

  • 홍동인;서성채;김병기;유진호;천승환
    • 스마트미디어저널
    • /
    • 제2권1호
    • /
    • pp.17-26
    • /
    • 2013
  • 최근 전자게시판은 각종 정보전달에 있어서 효과적인 도구로 사용되고 있다. 그러나 많은 전자게시판은 정보를 단방향으로 전달함으로 인해 상호작용성이 부족한 실정이다. 본 논문에서는 정보의 상호작용을 유지하면서 다양한 플랫폼에서 작동될 수 있는 안드로이드 기반의 전자게시판 소프트웨어 및 하드웨어에 대해 설계하고 구현한다. 특히 다양한 콘텐츠와 안드로이드 APP콘텐츠를 수정 없이 제시할 수 있는 콘텐츠 지원 프레임워크를 설계 하였다. 제안된 상호작용 DID는 관리자에게는 설치 및 관리를 용이하게, 사용자에게는 자연스럽게 정보를 수집하고, 활용할 수 있는 기능을 제공한다.

  • PDF

NFC 기반 2 Factor 전자결제를 이용한 모바일 갤러리-옥션의 기능 검증 및 시현 (Function verification and demonstration of mobile Gallery-Auction using NFC-based 2-Factor electronic payment)

  • 차윤석;오수희;김용일;노순국
    • 스마트미디어저널
    • /
    • 제7권1호
    • /
    • pp.24-30
    • /
    • 2018
  • 제노테크(주)는 NFC기반 2 factor 전자결제시스템의 보안기능 향상을 위해 FIDO인증기술을 이전받았으며 이를 활용하여 새로운 서비스인 갤러리-옥션을 개발하였고 대구 전시회에서 데모 시연을 진행하였다. 시연 결과 배너 제작 및 설치, UI변경, 동작 순서 변경 등의 개선 요구 사항이 있었으며 요구 사항을 바탕으로 갤러리-옥션을 개선하였다. 이후 개선된 갤러리-옥션의 2차 데모시연을 '아트:광주:17'에서 진행하였고 동시에 '아트:광주:17'의 시간당 입장객 수를 분석 및 시각화를 수행하였다.

장치형 비점오염원 저감시설의 여과 및 역세 효율 평가 (Evaluation of Filtration and Backwash Efficiency of Non-point Source Pollution Reduction Facility)

  • 윤상린;이용재;안재환;최원석;이정우;오혜철;김석구
    • 대한환경공학회지
    • /
    • 제39권12호
    • /
    • pp.664-671
    • /
    • 2017
  • 비점오염원은 도시, 도로, 농지, 산지, 공사장 등 불특정장소에서 불특정하게 수계에 오염물질을 배출하는 배출원으로, 오염물질의 유출경로가 명확하게 구분되지 않는다. 또한 수집이 어렵고 배출량이 강수량 등 기상조건에 크게 좌우되기 때문에 저감시설의 설계 및 유지관리가 어려운 측면이 있다. 한국의 경우 2006년 이후 비점오염원 처리에 대한 중요성이 심화되어 설치의무는 강화되고 있으나, 설치기준 및 효율에 대한 명확한 기준이 제시되지 못하여 단순히 저렴하며 유지관리가 필요치 않은 처리기술을 선호하고 있는 실정이었다. 본 연구는 발포고분자여재(Expended Polypropylene Media, EPP)를 이용한 여과형 비점오염원 저감시설에 대하여 처리능과 역세척에 의한 처리능의 유지에 대한 연구를 진행하였다. 여재층 높이가 증가할수록 처리효율의 변화폭은 줄었으며, 처리효율은 상승하는 것으로 나타났다. 60 cm의 여재층 높이에서 10 m/hr의 선속도의 경우 평균 처리효율은 94%로 나타났으며, 20 m/hr의 선속도의 경우 평균 처리효율이 90%로 나타났다. 여과 선속도 10 m/hr와 20 m/hr에서 180분 동안 운전 결과, 손실수두의 변화는 여재층 높이에 따른 차이가 조금 다른 양상으로 나타났다. 총 3회 반복한 역세척 실험 동안 여과시간이 경과함에 따라 처리효율은 여재가 폐색됨에 따라 감소하는 경향을 나타났다. 그러나 역세척 과정 이후에는 이전 여과과정의 초기 시점의 처리효율과 거의 유사하게 회복하는 것으로 확인하였다.

위피 개발자를 위한 아이폰 게임 애플리케이션 개발 방법론 (An iPhone Game Application Development Methodology for WIPI Developer)

  • 유현성;이대웅
    • 한국게임학회 논문지
    • /
    • 제9권6호
    • /
    • pp.139-150
    • /
    • 2009
  • 위피의 탑재 의무 폐지는 국내 위피 개발자들이 스마트폰 개발 환경으로 진출하는 계기를 만들었다. 특히 아이폰은 게임 애플리케이션의 새로운 판매 시장으로 가능성이 매우 크나, 표준적이고 명확한 게임 개발 방법론의 부재로 국내의 위피 개발자들이 진입하기에는 어려움이 있다. 그러므로 국내의 위피 개발자들이 효과적으로 아이폰 게임 애플리케이션 개발을 할 수 있는 방안이 필요하다. 본 논문에서는 위피와 아이폰의 애플리케이션 개발 방법론을 비교 분석하고, 이를 토대로 위피의 구조가 적용된 아이폰 게임 애플리케이션 개발 방법론을 제시한다. 이를 통해 국내의 위피 개발자들이 아이폰 게임 애플리케이션 개발을 용이하게 할 수 있다.

  • PDF

영상미디어 아트 공간연출 표현특성에 관한 연구 - 미술 전시장을 중심으로 - (A Study on the Characteristics of Space Production for Art Museums Reflex Media Art)

  • 유재엽
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
    • /
    • pp.156-160
    • /
    • 2004
  • Our time is called as the era of information-oriented society and up-to-date scientific technology, but it can be also called as the era of image. It is because the image has much influence upon our everyday life. In the deluge of images, the delivery of image Is a better and faster synergic tool than the delivery of language, and this trend is consistent with the phases of the times in which the analog modality of synergy is converted into the digital one. The image is a picture that is formed by a physical process, and is all the figures reflected by electronic equipments that reproduce the image. After the discovery of photograph in 1893, the image has been appeared first with the form of movie, and then with the form of TV. However, the appearance of such unidirectional synergic tools as movies and TV. has provided artists with some creative motives with which they intercommunicate their messages via some experimental bidirectional synergic tools. Among image-media arts, the performance of installation and participation is an important example that causes many changes through conceptional conversion, such as the conception of the time in space and formative characteristics. What satisfy this trend have been videos, lasers, holographic, and etc. Furthermore, the appearance of computer has provided a synesthesia, that is, a virtual reality, and mixed a real image with a visional one. The image-media art will realize better synergy through combining brand new machines, informational technology, and art, and have much influence upon our everyday life formatively and artistically in the future. with this study, through analyzing the meaning of relationship between image equipments and space.

  • PDF

Comparative Study of the Early Loading of Resorbable Blasting Media and Sandblasting with Large-grit and Acid-etching Surface Implants: A Retrospective Cohort Study

  • Kim, Sung-Beom;Kim, Young-Kyun;Kim, Su-Gwan;Oh, Ji-Su;Kim, Byung-Hoon
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제36권6호
    • /
    • pp.247-252
    • /
    • 2014
  • Purpose: This study compares the prognosis (the survival rate and marginal bone loss) of resorbable blasting media (RBM) surface implants and sandblasting with large-grit and acid-etching (SLA) surface implants in the early loading. Methods: This study targeted 123 patients treated by implants installation from January 2008 to March 2010. The loading was initiated in the maxilla within three to four months and in the mandible within one to two months. The types of restoration were single crown and fixed partial prosthesis. Those functioned over one year. The implants were classified by the surface of implants as Group 1: RBM surface (GS III; OSSTEM, Busan, Korea) and, Group 2: SLA surface (Superline; Dentium, Seoul, Korea). The groups were categorized by maxilla and mandible and compared by survival rate, marginal bone loss through clinical records evaluation, and radiographic measurements. Results: The marginal bone loss in the maxilla was $0.14{\pm}0.34mm$ (Group 1) and $0.30{\pm}0.37mm$ (Group 2), a statistically significant difference (P<0.05). In the mandible those were $0.28{\pm}0.54mm$ (Group 1) and $0.20{\pm}0.33mm$ (Group 2), not significant (P>0.05). There was no significant difference of marginal bone loss between maxilla and mandible by groups. During observation there was no implant failure, a survival rate of 100%. Conclusion: Both surfaces showed an excellent survival rate, and the marginal bone loss was not substantial.