• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.249-262
• /
• 2010

Regulatory test method for Total Petroleum Hydrocarbons (TPHs) in the marine sediment and biota has not still been established even though TPHs are one of the major pollutants in marine environment. Based on the Korean Soil Standard Method (SSM) for TPHs, we considered a new treatment method for determining TPHs in marine environmental samples by using a Gas chromatography coupled with Mass spectrometric detector. We suggested an improved recovery test for quality control procedures and introduced analytical procedures of removing sulfur, polar organic materials, water and saponification for removing neutral lipids in marine bottom sediments and biota.

• Journal of Plant Biotechnology
• /
• v.47 no.4
• /
• pp.324-329
• /
• 2020

Reed (Phragmites spp.) is a rhizomatous plant of the Poaceae family and is known as high tolerant plant to heavy metal contaminants. This plant is widely recognized as a Cd root-accumulator, but improved heavy metal tolerance and uptake capacity are still required for phytoremediation efficiency. To enhance capacity of hyperaccumulator plants, ethyl methane sulfonate (EMS) as chemical mutagen has been introduced and applied to remediation approaches. This study aimed to select EMS-mutagenized reeds representing high Cd resistance and large biomass and to investigate their ability of Cd accumulation. After 6 months cultivation of M₂ mutant reeds under Cd stress conditions (up to 1,500 µM), we discovered seven mutant individuals that showed good performances like survivorship, vitality, and high accumulation of Cd, particularly in their roots. Compared to wild type (WT) reeds as control, on average, dry weight of mutant type (MT) reeds was larger by 2 and 1.5 times in roots and shoots, respectively. In addition, these mutant plants accumulated 6 times more Cd, mostly in the roots. In particular, MT8 reeds showed the greatest ability to accumulate Cd. These results suggest that EMS mutagenesis could generate hyperaccumulator plants with enhanced Cd tolerance and biomass, thereby contributing to improvement of phytoremediation efficiency in Cd-contaminated soil or wastewater. Further studies should focus on identifying Cd tolerance mechanisms of such EMS-mutagenized plants, developing techniques for its biomass production, and investigating the practical potential of the EMS mutants for phytoremediation.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.989-996
• /
• 2012

Nitrate contamination of water environments can create serious problems such as eutrophication of rivers. Conventional biological processes for nitrate removal by heterotrophic denitrification often need additional organic substrates as carbon sources and electron donors. We tried to accelerate biological denitrification by using bioelectrochemical reactor (BER) in which electrode works as an electron donor. Denitrification activity of 8 environmental samples from various sediments, soils, groundwaters, and sludges were tested to establish an efficient enrichment culture for BER. The established enrichment culture from a soil sample showed stable denitrification activity without any nitrite accumulation. Microbial community analysis by using PCR-DGGE method revealed that dominant denitrifiers in the enrichment culture were Pantoea sp., Cronobacter sakazakii, and Castellaniella defragrans. Denitrification rate ($0.08kg/m^3{\cdot}day$) of the enrichment culture in BER with electrode poised at -0.5 V (vs Ag/AgCl) was higher than that ($2.1{\times}10^{-2}kg/m^3{\cdot}day$) of BER without any poised potential. This results suggested that biological denitrification would be improved by supplying potential throughout electrode in BER. Further research using BER without any organic substrate addition is needed to apply this system for bioremediation of water and wastewater contaminated by nitrate.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.283-290
• /
• 2017

In this study, the method to attach plastic film on the side vent from inside of greenhouse for the entire length was developed as the way to make crops less stressful while uniformly getting outside air into the greenhouse when ventilating using roof ventilation fans at single-span plastic greenhouse for oriental melon in a low-temperature period. The plastic film was installed from ground to 10cm below from the height where side vent is fully opened. In order to verify that the improved side vent can improve greenhouse environment and fruit yield, it was compared with the control plot of conventional side vent. Both greenhouses were not ventilated until February 25th, 2017. Air temperature in both greenhouses exceeded $40^{\circ}C$ in mid February. Therefore, it is judged that the greenhouse should be ventilated from mid February. Air temperature in the control plot exceeded $30^{\circ}C$ from late April. Therefore, it is judged that the plastic film attached to the inside of side vent should be removed in late April, or in early May at the latest. Soil temperature in the treatment plot in the mid Aril exceeded $20^{\circ}C$, which is suitable for growth, while that in the control plot was still below $20^{\circ}C$. Soil temperature in the control plot finally exceeded $20^{\circ}C$ in late April. The consumption of electricity was 47.2 kWh in the treatment plot, and 48.3 kWh in the control plot, which was no significant difference. The marketable yield of oriental melon in the treatment plot was 5,094kg, which was 23.9% more than that in the control plot, 4,113kg. The marketable fruit ratio was 73.5% in the treatment plot, and that in the control plot was 73.9%, which was no significant difference.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.883-893
• /
• 2019

In this study, crop coefficients were calculated in two different methods and the results were evaluated. In the first method, appropriateness of GLDAS-based evapotranspiration was evaluated by comparing it with observed data of Cheongmi-cheon (CMC) Flux tower. Then, crop coefficient was calculated by dividing actual evapotranspiration with potential evapotranspiration that derived from GLDAS. In the second method, crop coefficient was determined by using MLR (Multiple Linear Regression) analysis with vegetation index (NDVI, EVI, LAI and SAVI) derived from MODIS and in-situ soil moisture data observed in CMC, In comparison of two crop coefficients over the entire period, for each crop coefficient GLDAS K_c and SM&VI K_c, shows the mean value of 0.412 and 0.378, the bias of 0.031 and -0.004, the RMSE of 0.092 and 0.069, and the Index of Agree (IOA) of 0.944 and 0.958. Overall, both methods showed similar patterns with observed evapotranspiration, but the SM&VI-based method showed better results. One step further, the statistical evaluation of GLDAS K_c and SM&VI K_c in specific period was performed according to the growth phase of the crop. The result shows that GLDAS K_c was better in the early and mid-phase of the crop growth, and SM&VI K_c was better in the latter phase. This result seems to be because of reduced accuracy of MODIS sensors due to yellow dust in spring and rain clouds in summer. If the observational accuracy of the MODIS sensor is improved in subsequent study, the accuracy of the SM&VI-based method will also be improved and this method will be applicable in determining the crop coefficient of unmeasured basin or predicting the crop coefficient of a certain area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.285-299
• /
• 1987

Timing and placement of fertilizer applications are two managerial means to improve the fertilizer use efficiency. The relative importance of these two means is determined by the application rate. With the realistic rate of N application recommended to the small farmers in the tropics, at present and in the near future, basal application in right manner, seems to be more important than split application at different times. In wetland rice soils, deep placement by whatever available means is desirable. But in the situations where perfect deep placement is very difficult to implement, the whole-layer application may be worth trying, until better methods become available. In rainfed uplands, N fertilizer application plans should be contingent upon the amount and distribution of rainfall: apply a less risky rate as subsurface banding near the crop rows to start with; then, depending upon the rainfall prospects in the season, apply or omit the additional dose. Because the patterns of crop response to N fertilizer can be significantly different between the research farms and farmers' fields, it seems imperative to have information on the patterns of crop response to N under farmers' management conditions, for the development of realistic fertilizer application recommendations. To enable the farmers to adopt improved fertilizer application technologies, it is essential to develop and make available to farmers convenient fertilizer applicators. Past experience with the improved fertilizer use technologies indicates that, in the long run, the development of fertilizers that are not only effective and convenient for farmers to use but also easy to produce without major modifications of existing fertilizer production systems is the ultimate solution to the problem of low N fertilizer use efficiency.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.365-374
• /
• 2008

Plastics are comparatively new polymeric materials that are manufactured by chemical synthesis, making them different from natural materials such as wood, paper, stone, metal, and glass. Due to a wide range of properties, including processing capabilities and duration, plastics have become rapidly ubiquitous, being used in all industries, and have improved our quality of life. However, it is true that plastics cause environmental contamination problems that have become important social issues, such as environmental hormone leakage due to incineration or reclamation, difficulty in securing reclamation sites, and deadly poisonous dioxin generated by the incomplete incineration of waste plastic materials. To solve these problems, it is urgent to develop and commercialize degradable plastics that can be stably and conveniently used just as general plastics, and that are easily decomposed by sunlight, soil microbes, and heat generated from reclaimed land after use. This review presents recent worldwide trends in the development and marketing of environmentally degradable plastics.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.141-151
• /
• 2000

Over-grown seaweeds in Donghae(east sea of Korea peninsula) may impedes ocean environment, however, they can be a good nutrient resources for poultry feeds if they are utilized properly. In this study, seaweeds powder were tested for laying hens\` ration to investigate the effects on egg production rate, egg quality and calcium phosphorus excretion. One hundred 65wks-old brown layers were fed for 5 weeks alotted with seaweeds powder addition to experimental diet by 0(control), 0.5, 1.0 and 2.0%, respectively, and obtained following results; 1. Seaweeds proved a mid-protein low-energy feed resources with planty of K, Na, Ca, Mg, Sr and Fe. 2. Seaweeds addition by 0.5% and 1.0% improved egg production rate and egg-mass output markedly(p<0.05) than control. Seaweeds addition did not alter cholesterol level of yolk and yolk index, however egg shell thickness showed increasing trend by increasing seaweeds addition level. 3. Protein absorption and digestibility in seaweed addition treatments were significantly higher(p<0.05) than control group and protein contents of excreta in 0.5% and 1.0% treatments were reduced(p<0.05), which suggests effective protein metabolism for egg production. Increasing seaweeds addition reduces Ca and P contents in rectum and excreta, suggesting Ca and P utilization improvement in laying hens and lessening soil pollution. 4. In conclusion, seaweeds addition in layers' diet by 1.0% level improves egg-mass production and might be egg quality by increasing metabolism of protein, calcium and phosphorus.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.387-391
• /
• 2000

Barley straw is a good source of organic matter for next crop growth following barley. This study was conducted to investigate effects of barley straw application methods (application, removal, or incineration) on growth and yield in soybean cultivation following barley. A soybean variety, Eunhakong, was sown on 12 June with drill-seeder attached to tractor after tillage. Barley straw application resulted in increase in organic matter content compared to removal and incineration of barley straw, and soil physical properties such as water content and porosity, were improved by application and incineration of barley straw. Weed occurrence was deterred by 44% in barley straw application and by 31% in barley straw incineration compared with removal of barley straw. Number and dry weight of soybean nodules were move abundant in barley straw application than the other treatments at 4 and R2 stages. Barley straw application had less for dry weight than barley straw removal but greater than incineration of barley straw about 30 days after seeding. However barley straw application caused greater top dry weight 90 days after seeding. Root dry weight was not affected by barley straw application method at all growth stage. There're no significant differences in soybean yield among barley straw application methods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.325-335
• /
• 1985

Biogas production from agricultural wastes were summarized as follows: 1. Biogas Generation Characteristics of Various Manures and Residues a. Gas yield from crop residues like rice straw, rice hull, corn stalk and coconut husk can be improved by addition of animal manures. b. Gas yield from coconut husk can be improved through aerobic fermentation for at least one week before loading in the digester. c. Gas yield from fresh rice straw is better than from pre-fermented one, whether alone or in combination with animal manures. d. Initial study has shown that fresh azolla can be substituted for animal manures in manurerice straw combinations and gas yield derived based on unit volatile solids loaded is actually better than for manure-residue combinations. e. Gas production is highly sensitive to substrate pH and becomes almost nil at a pH of below 6. 2. Effect of ambient conditions and other factors on biogas production in a house hold-size digester. a. Results showed that compaction of rice straw in straw-manure combination can reduce gas yield compared with loosely mixed straw. b. The effective gas production period extended to 70 days using freshly threshed rice straw and fresh cattle manure as feed material. c. Underground and above ground digesters with shade have relatively more stable substrate temperature than aboveground exposed digesters. This relative temperature instability may likely be the reason for lower gas yield for the exposed aboveground digester loaded with loose straw-cattle manure substrate, compared with the underground digester with the same substrate. 3. Economic Analysis a. Based on prevailing costs of fuel, materials, and labor in the Philippines, biogas produced from the household size system is cheaper than either LPG or kerosene. b. If other benefits like organic fertilizer, pollution control and convenience are considered, biogas will surely be the best alternative fuel source.