• Journal of Korean Society of Forest Science
• /
• v.76 no.2
• /
• pp.161-168
• /
• 1987

Forest road (10 Km) constructed for the demonstrational purpose by Forest Work Training Center (F.T.C.) in 1984 was partly damaged through the roadside landside and ditch erosion by the typhoon in 1986. The causes were investigated to apply for protecting against the damage of mountain forest road. The damaging length caused by roadside landside is around 3% out of total length of 10 Km forest road, and mostly coming from the curve road filled up more than 10 m slope length on the concave mountain slope, partly from the foot of fillslope along the ever-following valley and from the both side of fillslope under the outlet of culvert with ever-flowing water. In case of ditch erosion, the big damage at V-type ditch is coming from the overflow of valley water flowing down along the inside slope. Other problem is also showing in the steepness of longitudial gradient, which is felt as a problem in road to be constructed under more than 10 persent of gradient. Other cause of ditch erosion is coming from the bury of sand basin (water collecting wall) by the debris in small diameter culvert zone, namely less than 400mm, in diameter and by the soil mass slumped down from steep wall slope. From above results the causes of F.T.C. model road damage is showing to come from no-following the general guide or little experience to protect against the forest road damage. When improved above mentioned mistakes, F.T.C. Method of mountain forest road type could be developed as a model of Mountain forest road.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.11-17
• /
• 2011

This study focused on the regulations and support system of green rooftop landscaping between Korea and China. Our research found out regulations and support system to review the supplement point to understand the present state of green rooftop landscaping in the two countries. We aimed to provide basic legal information for the development of green rooftop landscaping regulations. Also, a management plan guide and after-evaluation guide were suggested. First, roof load safety is the foremost factor for the structure of green rooftop landscaping. It includes not only considering the weight of construction materials, but also accurately calculating weight of rain, snow and the rooftop's capacity for people when the rooftop is designed. Second, the appropriate waterproof and root material should be selected basing on climatic conditions. Third, a maintenance and management plan needs to be established to regularly check the plant, facilities, soil and to maintain them. Fourth, the criteria of quality inspection are waterproof and root resistant material, and the growth and development of plants. Waterproof and root resistant materials are a very important part of rooftop greening, so they must be strictly inspected after construction. Fifth, the support system of rooftop greening should be continuously improved. The choice of the object and the amount of support should be strictly stipulated so that the construction of rooftop is promoted when volunteers do rooftop greening.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.849-858
• /
• 2014

The mount of antecedent 5-day rainfall (P5) is usually used to determine the antecedent soil moisture condition for estimating effective rainfall using the NRCS-CN method. In order to re-establish the threshold of P5 considering basin characteristics, this study investigated the sensitivity of the threshold of P5 to effective rainfall by comparing the corresponding observed direct runoff. The overall results indicate that the direct runoff estimated using the re-establihed threshold of P5 has smaller mean error (RMSE of 27.3 mm) than those using the conventional threshold (RMSE of 35.2 mm). In addition, after evaluating the effectiveness of threshold of P5 using the improvement index, the threshold re-established in this study improved the ability to estimate the direct runoff by 30% on average. This study also suggested to employ regression models using topographic indices to re-establish the threshold for ungauged basins. When using the re-established threshold from the regression model, the RMSE decreased ranging from 0.4 mm to 15.1 mm and the efficiency index of Nash and Sutcliffe increased up to 0.33.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.164-168
• /
• 2002

Yield prediction model of rice based on the boundary line analysis of the relationships between rice yield and meteorological conditions during rice growing period was reported in the previous report (Kim et al, 2001). Using the 15-year data of the 20 locations used for the model formulation and of the 12 locations not used, the model was tested for its predictability of location to location, year to year, and variety to variety variation of rice yield. The model predicted reliably the mean yield differences among locations, the yearly yield variation in each location, and the yield variation by variety. However, the model showed relatively lower predictability for the years of cool weather injury especially in mountainous locations. In conclusion, the model using boundary line analysis could be used to predict the yield responses to meteorological conditions during rice growth period and the locational, yearly, and varietal variations of rice yield. And the predictability of the present yield prediction model might be improved by including the boundary line analysis for the other factors such as soil characteristics, fertilization levels, etc.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.9
• /
• pp.29-36
• /
• 2019

Axial compressive failure loads ($P_n$) of diameter 500 mm and diameter 600 mm A type PHC pile were calculated as 7.7 MN and 10.6 MN, respectively. In the static pile load tests, the maximum axial compressive loads of the above 2 kinds of A type pile were measured as 6.9 MN and 8.8 MN respectively, therefore these measured maximum loads were at the level of 90% and 83% of $P_n$ respectively. Long-term allowable axial compressive loads ($P_a$) of the above 2 kinds of A type pile were 1.7 MN and 2.3 MN respectively. From the bi-directional pile load test data on the prebored PHC piles, it was confirmed that the allowable axial compressive bearing resistance was estimated as 131% of the long-term allowable compressive load of the PHC pile and showed higher than the allowable bearing capacity calculated by the current design method. Therefore, it has been verified that the PHC pile can be used up to the maximum long-term allowable compressive load, and it is suggested that the ultimate pile capacity formula used in the current design for prebored PHC piles should be improved to accommodate the actual capacity.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.92-98
• /
• 1988

With a purpose of finding out the effects of magnesium and boron enriched organic-compound fertilizer application on the dry matter yield, yield components and changes in the botanical composition on the hilly pasture, a field experiment was arranged with five different treatments as a randomized block desigh and lasted from September, 1984 to the end of growing season in 1986. The results obtained are summarized as follows: 1. As a early plant growth and development, winter hardiness, growth vigour and coverate of grasses at the plots with organic-compound fertilizer application were better comparing to single dressing. 2. Average dry matter yields for two years were shown significantly high due to increasing amount of fertilizer. This trend was same both single and organic-compound fertilizer. And dry matter yields with organic-compound fertilizer application of low (8,693.1 kg/ha) and conventional level (12,758.7 kg/ha) were appeared to increase by 10 and 15% than those of single dressing of Low (7,930.6 kg/ha) and conventional level (11,122.6 kg/ha), respectively. But it was not significant difference. 3. Dry matter yield of grasses was significantly gained by increasing amount of fertilizer. The yield of legumes at the plots with organic-compound fertilizer application the yields of grasses were a litle more increased by 8-14%, and legumes were much more gained by 26-29% than those of the same species groups with single dressing, but it was not significant between the differnet kinds of fertilizer in the same fertilizing level. 4. At the grassland management, the rate of legumes tended to dominate at the plot without fertilization gradually. On the other hand, the botanical compositions and the rates of grasses were much better maintained at the plots with fertilization. But the rates of legumes with organic-compound fertilizer application tended to increase a little more than those of single dressing gradually. 5. All of the soil chemical properties after the experiment were much more improved comparing to before the experiment. But the average contents of soil organic matter and available $P_2O_5$ were slightly higher at the plot with organic-compound fertilization, on the other hand, pH and exchangeable cations tended to a little less than those of single dressing.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.725-736
• /
• 2017

TThis study investigated the influence of AGH-Ringer (chelated organic minerals liquid fertilizer) on the growth, yield, and fruit quality of 'Jukhyang' strawberry in a hydroponic system. The results revealed that AGH-Ringer group led to significantly higher plant length than that of the control group, and that leaf length and leaf width increased with increasing leaf area. In addition, the fresh and dry weights of leaves and SPAD unit, which measures leaf color also showed a significant increase with AGH-Ringer. However, the length and dry weight of roots did not show significant differences when compared to the control group. In the fruit quality analysis, AGH-Ringer group did not show any difference in fruit length compared to the control group, but it increased both the fruit weight, which, along with the simultaneous increase in fruit width, increased the yield per strawberry. Furthermore, AGH-Ringer group strengthened the red skin color of the fruit, and resulted in significantly greater hardness than that of the control group, but did not have any effect on the soluble solid content and acidity. As shown in the results, the AGH-Ringer group resulted in lesser mineral content and lower to medium EC (electrical conductivity) in comparison to the inorganic mineral hydroponic fertilizer, which was used as a control. However, it increased the leaf growth, fruit weight, and yield, and improved the fruit quality by increasing the soluble solid content in the hydroponic system of 'Jukhyang' strawberry. Therefore, based on this study, AGH-Ringer is thought to be a more effective hydroponic fertilizer than the inorganic mineral hydroponic fertilizer. Moreover, the field experiment demonstrated that AGH-Ringer is a useful hydroponic fertilizer convenient for application in farms. This study also proved that AGH-Ringer is a fertilizer that can promote plant nutrition by controlling the salinity of the soil and facilitating the absorption of necessary minerals in future soil cultivation, thereby providing basic data for organic farming.