• Journal of Powder Materials
• /
• v.31 no.2
• /
• pp.152-162
• /
• 2024

The directed energy deposited (DED) alloys show higher hardness values than the welded alloys due to the finer microstructure following the high cooling rate. However, defects such as microcracks, pores, and the residual stress are remained within the DED alloy. These defects deteriorate the wear behavior so post-processing such as heat treatment and hot isostatic pressing (HIP) are applied to DED alloys to reduce the defects. HIP was chosen in this study because the high pressure and temperature uniformly reduced the defects. The HIP is processed at 1150℃ under 100 MPa for 4 hours. After HIP, microcracks are disappeared and porosity is reduced by 86.9%. Carbides are spherodized due to the interdiffusion of Cr and C between the dendrite and interdendrite region. After HIP, the nanohardness (GPa) of carbides increased from 11.1 to 12, and the Co matrix decreased from 8.8 to 7.9. Vickers hardness (HV) decreased by 18.9 % after HIP. The dislocation density (10^-2/m²) decreased from 7.34 to 0.34 and the residual stress (MPa) changed from tensile 79 to a compressive -246 by HIP. This study indicates that HIP is effective in reducing defects, and the HIP DED Stellite 6 exhibits a higher HV than welded Stellite 6.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.153-166
• /
• 2010

The study analyzes the lower-trunk sizes of 7-12 year old elementary school boys and compares sizes with boys, juniors, and men for analyzing and image fit. For the study, the data of SizeKorea (2004) was analyzed. Waist, hip, and the ratio of hip-thickness to hip-width were significantly different between age groups as well as between boys, juniors, and men. In the same height group, over 145cm boys had bigger waist than juniors and smaller waists than men. Therefore, the difference of waist size and the length of leg could cause the dissatisfaction of the pant fit when tall and plump boys chose a corresponding pants size to individual height or waist. The hip-thickness of body and pants patterns were compared in the analysis of the ease of hip-thickness. Tall and plump boys will feel discomfort in the crotch area because of the insufficiency of the hip-thickness of pants. Therefore, the amount of crotch extension of individual pants should be calculated by hip size instead of using the fixed amount. The reference sizes for discriminative pants for tall and plump boys were analyzed for a better fit.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.233-242
• /
• 2014

PURPOSE: The purpose of this study was to determine the correlation between the hip adductor muscles and abdominal muscles during bridge exercise. METHOD: Participants who met the criteria for this study(n=36) were divided into the three groups. The first experimental group performed normal bridge exercises and the second group performed bridge exercises with the contraction of the hip adductor muscles and the control group didn't perform any exercise. Transversus abdominis muscle thickness was measured by ultrasound imaging with a special transducer head device, at pre exercise, after 2 weeks, 4 weeks, and 6 weeks. RESULT: Data were analyzed using repeated ANOVA with the level of significance set at ${\alpha}=.05$. Transversus abdominis muscle thickness was influenced by contraction of the hip adductor muscles during bridge exercise in people without lower back pain. Compared with normal bridge exercise, transversus abdominis muscle thickness significantly increased in thickness during bridge exercise with contraction of the hip adductor muscles(p<.05). CONCLUSION: The results from this study showed that contraction of the hip adductor muscles during bridge exercise increased change in the transversus abdominis muscle thickness. These results can be a good source to prevent low back pain due to hip adductor weakness. Therefore, inducing activation of hip adductor with abdominal stabilizing exercise is more effective in patients with low back pain.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.1
• /
• pp.25-36
• /
• 2002

Objectives: This study was conducted to find out risk factors related to elderly hip fracture, so that the result could provide basic data to establish prevention programs for hip fracture among the elderly. Methods: The data were collected from 199 cases hospitalized in 4 university hospitals in Pusan from January, 1996 to December, 1998, 193 healthy controls who visited elderly facilities in Pusan. The data were obtained from medical records and by using questionnaires through telephone contact or direct personal interview with the subjects or their family, and were analyzed for 2-test and multiple logistic regression. The risk factors were shown with odds ratios and their 95% confidence intervals. Results: In univariate analysis, the odds ratio of hip fracture risk was estimated to be 1.9 for the elderly aged 75 years as compare with those aging less than 65 years; 42 for those with job as compared with those without job; 3.3 for those with more than 6 children as compared with those with one or two children. For the variables related to physical characteristics, small height (p=0.015), light weight (p=0.000), and low BMI (p=0.014) were risk factors for elderly hip fracture. Sane variables related to health, such as previous history of illness (OR=3.3.), abnormal blood pressure (OR=1.6), previous fracture history (OR=22), lower limbs weakness (OR=12.1) and gait disturbance (OR=42.6), were significantly associated with the risk of hip fracture. In multiple logistic regression, risk factors for hip fracture were age, having job, lower limb weakness and previous history of illness. The adjusted odds ratios of hip fracture risk among the elderly were age (OR=1.1), having jobs (OR=11.7), weak lower limb (OR=10.8) and previous history of illnesses (OR=3.3), respectively. Conclusion: This study suggests that the plan for improving the daily living environment for the elderly systematically should be implemented to avoid the chances of fall, and that programs encouraging to practice regular exercise for physical activity and to promote health of the elderly should be developed.

• Hip & pelvis
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2024

Gout is triggered by the accumulation of uric acid in the body, leading to hyperuricemia. Genetic, metabolic, and environmental factors can influence this condition. Excessive uric acid buildup results in the formation of monosodium urate (MSU) crystals, which precipitate in specific areas of the body, including the joints, where they can cause symptoms of gout. While the acute and chronic symptoms of gout have been well-documented, diagnosis of gout affecting the hip joint poses significant challenges. The global incidence of gout, the most prevalent form of inflammatory arthritis, is on the rise. Evaluation of the clinical signs, laboratory results, and imaging results is generally required for diagnosis of gout in cases where MSU crystals have not been detected. Hyperuricemia is considered a primary cause of arthritis symptoms, and comprehensive guidelines for treatment are available. Therefore, the choice of medication is straightforward, and moderate effectiveness of treatment has been demonstrated. Gout is a chronic disease, requiring lifelong uric acid-lowering medications, thus application of a treatment strategy based on the target blood uric acid concentration is necessary. Consequently, cases of gout will likely be observed more frequently by hip surgeons in clinical scenarios in the future. The objective of this review is to provide an overview of the pathophysiology of gout and subsequently examine recent advances in diagnostic methods and therapeutic agents based on an understanding of its underlying mechanisms. In addition, literature on gout-related issues affecting the hip joint, providing a useful reference for hip surgeons is examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.969-970
• /
• 2013

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.979-988
• /
• 2008

The purpose of this study is to analyze the lower body size and forms of married women in their thirties who have experienced pregnancy and parturition. Their measurements derived from the direct anthropometry and indirect photographic measures were compared to those of 20's. Improving consumer satisfaction for missy brand, especially in fitness of skirt and pants, some lower body classification were presented. The results were as follows : 1. The characteristics of lower body showed many differences by individuals especially in depth, girth, length and angle measures rather than height and breadth measures. Many items including index, calculations and angles revealed significant differences compared to those of 20's. Several breadth items, crotch length had distinct increase than those of women in twenties. Flattened buttocks side silhouette from waist to hip, buttocks drooping and decrease of inclination implied the influence of pregnancy, parturition and aging. 2. We hardly find out sizing system differences between missy brand and miss brand. Based on waist and hip girth measurements of subjects, sizing system of missy apparel wasn't suitable for their body size. Excessive drop(hip girth-waist girth) of missy brands, 25~30 cm, was almost the same to the drop of miss brands. 3. To improve the size satisfaction of missy women, we classified the lower body into 5 types according to drop, buttocks angle and hip length. Type 1 was small waist with large buttocks projection, and hip length was close to an average. Type 2 was small waist with medium buttocks projection, and the hip length was close to an average. Type 3 was medium waist, with average projection of the buttocks and hip length. Type 4 was large waist, projection of the buttocks and the hip length were close to an average. Type 5 was large waist, projection of the buttocks was small and the hip length was close to an average.

• Clinics in Orthopedic Surgery
• /
• v.10 no.4
• /
• pp.393-397
• /
• 2018

Background: The purpose of our study was to evaluate the usefulness of hip arthroscopy including extensive capsulectomy for synovial chondromatosis of the hip. Methods: From 2008 to 2016, 13 patients with synovial chondromatosis of the hip were treated with arthroscopic removal of loose bodies and synovectomy using three arthroscopic portals. An extensive capsulectomy was performed to allow the remaining loose bodies to be out of the extracapsular space, and the excised capsule was not repaired. All patients were assessed by clinical scores and the radiographs were reviewed to determine whether the remaining loose bodies disappeared at the last follow-up. Results: Eight men and two women were followed up for a minimum of 1 year (mean, 3.8 years; range, 1 to 6.8 years) after hip arthroscopy. Clinical outcomes such as modified Harris hip score, University of California Los Angeles score, and Western Ontario and McMaster Universities Osteoarthritis Index score improved at the last follow-up. Although seven hips had remaining loose bodies after arthroscopic surgery, the remaining loose bodies disappeared in five hips (71.4%) at the last follow-up. Conclusions: Arthroscopic surgery was useful to treat synovial chondromatosis of the hip. In spite of limited removal of loose bodies, arthroscopic procedures including extensive capsulectomy could be effective for the treatment of synovial chondromatosis of the hip.

• Physical Therapy Korea
• /
• v.30 no.2
• /
• pp.144-151
• /
• 2023

Background: The gluteus maximus (GM) muscle comprise the lumbo-pelvic complex and is an important stabilizing muscle during leg extension. In patients with low back pain (LBP) with weakness of the GM, spine leads to compensatory muscle activities such as instantaneous increase of the erector spinae (ES) muscle activity. Four-point kneeling arm and leg lift (FKALL) is most common types of lumbopelvic and GM muscles strengthening exercise. We assumed that altered hip position during FKALL may increase thoraco-lumbar stabilizer like GM activity more effectively method. Objects: The purpose of this study was investigated that effects of the three exercise postures on the right-sided GM, internal oblique (IO), external oblique (EO), and multifidus (MF) muscle activities and pelvic kinematic during FKALL. Methods: Twenty eight healthy individuals participated in this study. The exercises were performed three conditions of FKALL (pure FKALL, FKALL with 120° hip flexion of the supporting leg, FKALL with 30° hip abduction of the lifted leg). Participants performed FKALL exercises three times each condition, and motion sensor used to measure pelvic tilt and rotation angle. Results: This study demonstrated that no significant change in pelvic angle during hip movement in the FKALL (p > 0.05). However, the MF and GM muscle activities in FKALL with hip flexion and hip abduction is greater than pure FKALL position (p < 0.001). Conclusion: Our finding suggests that change the posture of the hip joint to facilitate GM muscle activation during trunk stabilization exercises such as the FKALL.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.15-24
• /
• 1996

To generate workspace analytically using the robot kinematics, data on range of human joints motion, especially range of two degrees of freedom motion, are needed. However, these data have not been investigated up to now. Therefore, in this research, we are to investigate an interaction effect of motions with two degrees of freedom occurred simultaneously at the shoulder, virtual hip(L5/S1) and hip joints, respectively, for 47 young male students. When motion with two degrees of freedom occurred at a joint such as shoulder, virtual hip and hip joints, it was found from the results of ANOVA that the action of a degree of freedom motion may either decrease or increase the effective functioning of the other degree of freedom motion. In other words, the shoulder flexion was decreased as the shoulder was adducted or abducted to $60^{\circ}C$TEX>or abducted from $60^{\circ}C$TEX>to maximum degree of abduction, while the shoulder flexion increased as the joint was abducted from $60^{\circ}C$TEX> to $60^{\circ}C$TEX> The flexion was decreased as the virtual hip was bent laterally at the virtual hip joint, and also did as the hip was adducted or abducted from the neutral position. It is expected that workspace can be generated more precisely based the data on the range of two degrees of joint motion measured in this study.