• Journal of environmental and Sanitary engineering
• /
• v.22 no.2
• /
• pp.61-73
• /
• 2007

PCBs의 대기 중 농도는 고용량 PUF sampler를 이용하여 2000년부터 2002년까지 주 1회 수도권 인근지역인 경기도 안성에서 측정하였다. 본 논문은 비선형 회귀모델을 이용하여 대기 중 가스상 PCBs의 연간, 월간 사이클을 평가 하고자 한다. Clausius-Clepeyron 식을 이용한 가스상 PCBs의 기울기는 고분자로 갈수록 증가하는 경향이었다. 이는 고분자 PCBs는 저분자 PCBs에 비해 온도 의존성이 크다는 것을 의미한다. 다시 말해, 고분자 PCBs는 다른 지역에서 장거리 이송되어 오는 오염물질의 영향 보다는 지역적인 오염원(예, 토양, 수계 등)에 의해 영향을 크게 받고 있다는 것을 시사한다. Lorentzian 모델을 이용한 총 PCBs의 일별, 월별 회귀식의 결정계수($R^2$)는 각각 0.62(p<0.0001), 0.88(p<0.0001)로 나타나 유의한 결과를 보였다. 또한, 비선형 회귀식 모델을 활용하여 구한 가스상 PCBs의 일별, 월별 싸이클을 모사한 방정식도 매우 유의한 결과(p<0.0001)를 나타내었다.

• Journal of Biomedical Engineering Research
• /
• v.35 no.6
• /
• pp.227-233
• /
• 2014

In this paper, to quantitatively evaluate the degree of rehabilitation for the disabled of unilateral lower extremity, we compared the EMG pattern of normal and simulated abnormal gait. The EMG signal was measured at a rate of 1 kHz on the quadriceps and biceps femoris, the pressure sensor was attached to the sole in order to distinguish the gait cycle. Integrated EMG (IEMG) was obtained by the gait cycle, and classified four patterns that were the normal gait pattern, amplitude decrease pattern, reversed pattern, and irregular pattern. For comparison of the patterns, a curve fitting was performed using the trigonometric functions. The result of curve fitting, the method using a variable A that corresponds to the amplitude of the regression curve was able to distinguish the reverse pattern and remaining pattern. The coefficient of determination ($R^2$) representing coincidence of the pattern of the regression curve and EMG was confirmed the biggest value at the normal gait. Therefore, the degree of normal gait can be confirmed using the coefficient of determination. This results show that it is possible to quantitatively confirm the degree of unilateral lower extremity disabled rehabilitation, and it will be contributed to the study of efficient rehabilitation methods by objective analysis.

• Journal of Oral Medicine and Pain
• /
• v.46 no.4
• /
• pp.125-130
• /
• 2021

Purpose: The dental age estimation of children is performed using dental maturity. Postmortem missing of the anterior teeth or the distortion of image of the anterior teeth in panoramic radiographs can make it difficult to analyze the development of the anterior teeth. This pilot study was conducted to derive a new age estimation method based only on the developmental stage of mandibular posterior teeth. Methods: This study was conducted using panoramic radiographs of 650 subjects aged 3 to 15 years old. The dental developmental stages of the lower left first premolar, second premolar, first molar and second molar were evaluated according to the Demirjian's criteria. The intra-/inter-observer reliability was evaluated, and multiple linear regression analyses were performed including the developmental stage of each tooth as an independent variable. Results: The intra-/inter-observer reliability was 0.9626 and 0.8877, respectively, and showed very high reproducibility. Multiple linear regression analyses were performed for males and females, and the age calculation table was derived by obtaining the intercept and the coefficient according to the development stage of each tooth. The coefficient of determination (r²) of the age calculation method was 0.9634 for male and 0.9570 for female subjects, and the mean difference between chronological age and estimated dental age was -0.42 and -0.21, respectively. Conclusions: This pilot study evaluated the developmental stages of four lower posterior teeth in the Korean group according to Demirjian's criteria, and derived age estimation method. The accuracy was lower than when more teeth were used, but it will be useful to estimate age of children when the anterior teeth are difficult to accurately analyze.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.39-50
• /
• 2020

The objective of this study was to assess the livestock nonpoint source pollutant impact on water quality in Namgang dam watershed using the HSPF (Hydrological Simulation Program-Fortran) model. The input data for the HSPF model was established using the landcover, digital elevation, and watershed and river maps. In order to apply the pollutant load to the HSPF model, the delivery load of the livestock nonpoint source in the Namgang dam watershed was calculated and used as a point pollutant input data for the HSPF model. The hydrologic and water quality parameters of HSPF model were calibrated and validated using the observed runoff data from 2007 to 2015 at Sancheong station. The R² (Determination Coefficient), RMSE (Root Mean Square Error), NSE (Nash-Sutcliffe efficiency coefficient), and RMAE (Relative Mean Absolute Error) were used to evaluate the model performance. The simulation results for annual mean runoff showed that R² ranged 0.79~0.81, RMSE 1.91~2.73 mm/day, NSE 0.7~0.71 and RMAE 0.37~0.49 mm/day for daily runoff. The simulation results for annual mean BOD for RMSE ranged 0.99~1.13 mg/L and RMAE 0.49~0.55 mg/L, annual mean TN for RMSE ranged 1.65~1.72 mg/L and RMAE 0.55 mg/L, and annual mean TP for RMSE ranged 0.043~0.055 mg/L and RMAE 0.552~0.570 mg/L. As a result of livestock nonpoint pollutant loading simulation for each sub-watersehd using the HSPF model, the BOD ranged 16.6~163 kg/day, TN ranged 27.5~337 kg/day, TP ranged 1.22~14.1 kg/day.

• Plant Journal
• /
• v.16 no.4
• /
• pp.26-32
• /
• 2020

The performance monitoring system in the power plant should have the capability to estimate power generation efficiency accurately. Several power generation efficiency models have been proposed for the combined heat and power (CHP) plant which produces both electricity and process steam(or heating energy, hereinafter expressed by process steam only). However, most of the models are not sufficiently accurate due to the wrong evaluation of the process steam value. The study suggests Electricity Conversion Efficiency (ECE) model with determination of the heat rate of process steam using operational data. The suggested method is applied to the design data and the resulted trajectory curve of power generation efficiency meets the data closely with R2 99.91%. This result confirms that ECE model with determination of the model coefficient using the operational data estimate the efficiency so accurately that can be used for performance monitoring of CHP plant.

• Korean Journal of Agricultural Science
• /
• v.51 no.1
• /
• pp.79-86
• /
• 2024

As the frequency and intensity of heavy rains increase, the vulnerability of agriculture to disasters also increases. Consequently, there is a need to improve flood and inundation predictions. To enhance the accuracy of inundation predictions, it is essential to monitor water level and discharge data within agricultural areas. This study was conducted to monitor water levels and rainfall in the Cheongju Sindae area from 2022 to 2023, and the data was utilized as input and validation data for agricultural inundation modeling. Four irrigation drainage canals were installed to a square-shaped concrete structure where the water level gauge is. It was then confirmed that the water level rises with rainfall. The flow velocities were monitored during periods of heavy rainfall. The rating curve, which estimates water level and flow velocity based on observations, was estimated using the software K-HQ. The resulting curve was presented with the Coefficient of Determination (R²). K-HQ was also used to calculate the equation for the rating curve, taking outliers into account at each data point. Outliers were extracted and the rating curve was recalculated. As the coefficient of determination of three out of four stations exceeded 0.95, the estimated rating curve may be considered reliable for discharge estimation. This study provides critical data for enhancing agricultural inundation modeling accuracy and drainage improvement projects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.228-228
• /
• 2016

증발산량은 수자원 부존량 평가, 물수지 분석, 지구의 물순환 및 에너지 순환을 이해하기 위해서 알아야할 수문량이나, 이를 산정하기 위하여 단순한 가정을 하거나 경험식을 사용하는 접근에는 신뢰성에 문제가 생긴다. 본 연구에서는 아시아 지역내의 여러 지점에서 에디공분산 시스템을 활용해 플럭스 자료를 구축해놓은 Asia Fluxnet의 자료를 활용해 보완관계법(Complimentary relationship) 기반으로 제한된 기상자료를 이용해 구한 증발산량을 산정하는 방법론들을 평가하였다. Granger and Gary(GG)는 실제 증발산량은 습윤조건의 증발산량의 2배에 잠재 증발산량간의 차와 같다는 보완관계를 수정하여 일반화하고, 잠재 증발산량을 산정하는 경험식을 제시하였다. 이러한 수정된 보완관계식을 활용한 GG 방법론을 활용하여 산정한 증발산량을 측정된 증발산량과 비교한 정확성을 정량화 하기 위해 Average root mean square error (RMSE), mean absolute bias (BIAS), coefficient of determination ($R^2$)과 같은 통계값을 이용하였다. 최종적으로 각 사이트의 기후를 Aridity Index (AI)를 이용하여 분류하였으며 분류된 기후별로 GG 방법론의 적용성을 검토하였다.

• Korean Journal of Metals and Materials
• /
• v.46 no.3
• /
• pp.118-124
• /
• 2008

Abstract: A minimum commitment method(MCM) was applied to predict the long-term creep rupture life for type 316LN stainless steel(SS). Lots of the creep-rupture data for the type 316LN SS were collected through world-wide literature surveys and the experimental data of KAERI. Using these data, the long-term creep rupture life above ${10}^5$ hour was predicted by means of the MCM. In order to obtain the most appropriate value for the constant A being used in the MCM equation, trial and error method was used for the wide ranges from -0.12 to 0.12, and the best value was determined by using the coefficient of determination, $R^2$ which is a statistical parameter. A suitable value for the A in type 316LN stainless steel was found to be at -0.02 ~ -0.05 ranges. It is considered that the MCM will be superior in creep-life prediction to commonly-used timetemperature parametric method, because the P(T) and G($\sigma$) functions are determined from the regression method based on experimental data.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.4
• /
• pp.9-19
• /
• 2016

The objective of this study was to evaluate the applicability of SWAT (Soil and Water Assessment Tool) model for runoff estimation in the Nam river dam watershed. Input data for the SWAT model were established using spatial data (land use, soil, digital elevation map) and weather data. The SWAT model was calibrated and validated using observed runoff data from 2003 to 2014 for three stations (Sancheong, Shinan, Changchon) within the study watershed. The $R^2$ (Determination Coefficient), RMSE (Root Mean Square Error), NSE (Nash-Sutcliffe efficiency coefficient), and RMAE (Relative Mean Absolute Error) were used to evaluate the model performance. Parameters for runoff calibration were selected based on user's manual and references and trial and error method was applied for parameter calibration. Calibration results showed that annual mean runoff were within ${\pm}5%$ error compared to observed. $R^2$ were ranged 0.64 ~ 0.75, RMSE were 2.51 ~ 4.97 mm/day, NSE were 0.48 ~ 0.65, and RMAE were 0.34 ~ 0.63 mm/day for daily runoff, respectively. The runoff comparison for three stations showed that annual runoff was higher in Changchon especially summer and winter seasons. The flow exceedance graph showed that Sancheong and Shinan stations were similar while Changchon was higher in entire fraction.

• Physical Therapy Korea
• /
• v.18 no.4
• /
• pp.11-18
• /
• 2011

The aim of this study was to analyze the relationship between physical impairments and daily activities on the basis of the outcome measurements in stroke patients. Seventy-six stroke patients participated in this study. Two physical therapists evaluated 3 clinical common measurements, i.e., the Fugl-Meyer Assessment (FMA), the Berg Balance Scale (BBS), and the Functional Independence Measure (FIM). Multiple regression analysis was used, as the dependent variables were the BBS and FIM; the independent variables were post-stroke duration, FMA of Upper Extremity (FMU), and FMA of Lower Extremity (FML). In the regression equation of the BBS, the coefficient of determination ($R^2$) was .383, and the FML was found to be the most important variable for determining the BBS score. In the regression equation of the FIM, $R^2$ was .531, and the FML was found to be the most important variable for determining the FIM. These results suggest that there is a need to determine the function of activities on the basis of the physical impairments of stroke patients. More variable measurement tools on the levels of body function and structure, as well as activity limitations are required.