• 해양환경안전학회지
• /
• 제26권1호
• /
• pp.8-14
• /
• 2020

최근 4년 간 발생한 해양사고 통계자료(중앙해양안전심판원, 2018)에 의하면 충돌사고의 대부분이 어선을 포함한 소형선에서 발생하고 있으며 경계소홀, 항행법규 미준수 등의 인적 요인이 충돌사고의 주요 원인이 되고 있다. 이에 따라 사고 예방을 위해 교육, 훈련을 확대 강화하고 있지만 소형선에 대한 사고는 여전히 일어나고 있는 실정이며 인적 요인으로 유발되는 사고를 줄이고자 기술적 방안이 지속적으로 개발되고 있다. 본 연구에서도 상대적으로 고속인 소형선에 송·수신 주기가 빠른 WAVE 통신기술을 적용하여 충돌 회피시스템 구성하므로 인적 요인으로 인해 발생하는 사고를 감소시키고자 하였다. 그에 따라 통신 범위의 적정성 판단하고 회피동작 시간과 범위를 설정하였으며 그 것을 토대로 제어 알고리즘 고안 하였다. 그리고 통신단말기-제어기-조타장치를 구성하고 충돌회피 모의 시뮬레이션을 수행하므로 경보신호 발생 시 회피동작의 정상 구현을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.435-444
• /
• 2020

Ultrasonic guided wave testing is a very promising non-destructive testing method for rails, which is of great significance for ensuring the safe operation of railways. On the basis of the semi-analytical finite element (SAFE) method, a analytical model of 59R2 grooved rail was proposed, which is commonly used in the ballastless track of modern tram. The dispersion curves of ultrasonic guided waves in free rail and supported rail were obtained. Sensitivity analysis was then undertaken to evaluate the effect of rail elastic modulus on the phase velocity and group velocity dispersion curves of ultrasonic guided waves. The optimal guided wave mode, optimal excitation point and excitation direction suitable for detecting rail integrity were identified by analyzing the frequency, number of modes, and mode shapes. A sinusoidal signal modulated by a Hanning window with a center frequency of 25 kHz was used as the excitation source, and the propagation characteristics of high-frequency ultrasonic guided waves in the rail were obtained. The results show that the rail pad has a relatively little influence on the dispersion curves of ultrasonic guided waves in the high frequency band, and has a relatively large influence on the dispersion curves of ultrasonic guided waves in the low frequency band below 4 kHz. The rail elastic modulus has significant influence on the phase velocity in the high frequency band, while the group velocity is greatly affected by the rail elastic modulus in the low frequency band.

• 한국환경과학회지
• /
• 제30권8호
• /
• pp.621-628
• /
• 2021

The characteristics of time changes in air temperature, DI (discomfort index) and WBGT (wet-bulb globe temperature) were investigated for inland city (daegu) and coastal city (pohang) of Gyeongbuk Province during the 2018 consecutive heat wave season. The time when the temperature dropped below 33℃ was around 19h in both regions. As such, the two regions were similar with respect to the time up to which the heatwave warning levels continued. However, the discomfort index (DI) was higher than 27 in Pohang. Most people feel unpleasant when an discomfort index of 27 or higher appears. The results indicated that Korea's night-time thermal environment during the summers is particularly poor in the southern coastal areas. WBGT began at 09:00 and lasted until 21:00, with a score of 31 or higher; this score, in principle, corresponded with the duration of outdoor activity in both regions. Therefore, it was found that outdoor work was at a level where all day long had to be stopped in both areas during the heat wave. Although time changes in temperature and WBGT were similar in both regions, Discomfort Index (DI) differed significantly. The difference refers to the fact that Pohang is strongly affected by the high heat capacity effect and the supply of water vapor from the sea.

• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.193-199
• /
• 2013

파랑 중 선박의 직진성능을 시뮬레이션을 통하여 비교 검토하였다. 시뮬레이션을 구성하기위해 선박의 3자유도 조종운동방정식을 사용했으며, 선박에 가해지는 파랑강제력은 3차원 특이점 분포법을 사용하여 계산하였다. 시뮬레이션의 외란으로서 규칙파와 불규칙파를 사용하였고 최대사용타각과 제어시간지연을 제어기의 제한조건으로 설정하였다. 조종성능에 따른 직진성능을 검토하기 위해 유체력 미계수를 인위적으로 변화시킴으로서 조종성능이 다른 선박의 시뮬레이션을 구성하였다. Autopilot제어기를 사용한 일정시간의 선박의 직진 시뮬레이션을 수행하고 해당시간동안의 직진거리를 비교하여 선박의 직진성능을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권1호
• /
• pp.12-17
• /
• 2010

OWC 파력발전장치는 에너지 변환장치로 널리 사용되고 있고 공기실의 작동성능을 향상시키기 위하여 파랑집중장치를 고안 하였다. 본 논문에서 사용된 수치조파수조는 two-phase VOF모델을 기반으로 하여 구현되었고 재생된 규칙 입사파는 공기실까지 전달되어 내부의 왕복 유동장을 형성하게 하였다. 수치조파수조는 연속방정식, Reynolds-averaged Navier-Stokes방정식, two-phase VOF 법으로 구성 되였고 standard k- 난류모델, 유한체적법, NITA-PISO 알고리즘 그리고 dynamic mesh기능을 채택하였다. OWC 공기실 파랑집중장치의 성능에 대하여 수치적으로 고찰하였다.

• 한국항해항만학회지
• /
• 제37권3호
• /
• pp.283-289
• /
• 2013

Wave profiles coming with oblique angle to trapezoidal submerged breakwater on the porous seabed are computed numerically by using a boundary element method. The analysis method is based on the wave pressure function with the continuity in the analytical region including fluid and structure. When compared with the existing results on the oblique incident wave, the results of this study show good agreement. The fluctuation of wave profiles is increased in the rear of the submerged breakwater due to the increase of the transmission coefficient, as the incident angle increases. In addition, in the case of the wave profiles passing over the submerged breakwater on porous seabed, it is able to verify that the attenuation of wave height occurs more significantly due to the wave energy dissipation than that of passing over the submerged breakwater on the impermeable seabed. The results indicate that wave profile own high dependability regarding the change of oblique incident waves and porous seabed. Therefore, the results of this study are estimated to be applied as an accurate numerical analysis referring to oblique incident waves and porous seabed in real sea environment.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.650-656
• /
• 2023

본 논문은 NS-3 기반의 5G 시스템 레벨 시뮬레이터를 활용하여 mmWave 대역의 채널 모델을 구현하고, RF 성능 검증을 통해 구현한 모델의 신뢰성과 유효성을 분석한다. mmWave 대역의 RF 성능 검증을 위한 채널 모델은 3GPP TR 38.901에서 정의하는 채널의 특성, 빔포밍, 안테나 구성, 시나리오 등의 파라미터를 고려하여 구성한다. 또한, 시뮬레이션 결과는 3GPP 표준에서 허용하는 범위 내에 있음을 확인하고, REM(Radio Environment Map)을 활용하여 실내 환경 시나리오에서 신뢰성을 증명한다. 따라서 본 연구에서 구현한 채널 모델은 실제 5G 네트워크의 설계 및 구축에 적용이 가능하며, 다양한 파라미터 변경으로 RF 성능을 평가하고 검증하는 방법을 제시한다.

• 해양환경안전학회지
• /
• 제1권1호
• /
• pp.95-106
• /
• 1995

The small-waterplane-area-twin-hull(SWATH) ship has been recognized as a promising high performance ship because of her superior seakeeping characteristics and large deck area for various operations compared to the conventional monohull ship. significant advances in analytical technics for the prediction of the ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for SWATH ship have been much developed during the last twenty years. Based on these developments in technology an integrated computational procedures for prediction wave loads and structural responses can be used to get a accurate results. But the major problem of SWATH ship's structural design is the accurate prediction of structural responses by the maximum critical loads likely to be experienced during the life of SWATH. To get a easier and safer computational procedures and the analytical approach for determining the accurate structural responses, a case study has been presented through the project experienced.