• The Journal of Information Technology
• /
• v.2 no.2
• /
• pp.89-105
• /
• 1999

In this paper, we present a countermeasure for a various trouble occurred in secure communication of document image. We Propose a security system for transmission of document image using mixing algorithm that the third party cannot conceive secure transmission of information instead of existing scheme which depend on crypto-degree of security algorithm, itself. For this, RM, DM and RDM algorithm for mixing of secure bits are proposed and applied to digital signature for mixing for secure document and mixing for non-secure document by secure document. Security system for document image involves not only security scheme for document image transmission itself, but also digital signature scheme. The transmitter embeds secretly the signatures onto secure document, embeds it to non-secure document and transfers it to the receiver. The receiver makes a check of any forgery on the signature and the document. Because the total amount of transmitted data and the image quality are about the same to those of the original document image, respectively, the third party cannot notice the fact that signatures and secure document are embedded on the document image. Thus, the probability of attack will be reduced.

• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.62-71
• /
• 2022

The Global RE100 campaign is a one of the voluntary campaign, but it has a lot of influence on domestic companies that have not yet joined the Global RE100. Accordingly, the Korean government introduced the Korean RE100 (K-RE100) system to prepare an institutional mechanism for domestic companies to respond to RE100. However, in Korea, due to the high LCOE of renewable energy and institutional limitations of the power transaction system, there is a limit for companies to implement RE100 in various ways. Therefore, in this study, the implementation cost of RE100 for green tariff, REC purchase, third-party PPA, direct(or corporate) PPA, and self-generation was compared and analyzed to derive the order of implementation with the net present value (NPV) of costs incurred over 20 years. As a result, self-construction was analyzed as the most economical method, but the implementation through the green tariff seemed to be the most realistic implementation method so far. However, considering the gradually falling LCOE, third-party PPA and direct PPA could be secured competitiveness against green tariff in 2025 and 2026. Then it could allow the companies to have various portfolios for implementation of RE100.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.60-67
• /
• 2014

This paper considers an inbound ordering and outbound dispatching problem for multi-products and multi-vehicles in a third-party distribution center. The demands are dynamic over a discrete and finite time horizon, and replenishing orders are shipped in various transportation modes and the freight cost is proportional to the number of vehicles used. Any mixture of products is loaded onto any type of vehicles. The objective of the study is to simultaneously determine the inbound lot-sizes, the outbound dispatching sizes, and the types and numbers of vehicles used to minimize total costs, which consist of inventory holding cost and freight cost. Delivery time window is one of the general dispatching policies between a third-party distribution center and customers in practice. In the policy, each demand of product for a customer must be delivered within the time window without penalty cost. We derive mixed integer programming models for the dispatching policy with delivery time windows and on-time delivery dispatching policy, respectively and analyze the effect on a dispatching policy with delivery time windows by comparing with on-time delivery dispatching policy using various computational experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.240-246
• /
• 2022

This paper introduces a container loading problem and proposes a theoretical approach that efficiently solves it. The problem is to determine a proper weight of products loaded on a container that is delivered by third party logistics (3PL) providers. When the company pre-loads products into a container, typically one or two days in advance of its delivery date, various truck weights of 3PL providers and unpredictability of the randomness make it difficult for the company to meet the total weight regulation. Such a randomness is mainly due to physical difference of trucks, fuel level, and personalized equipment/belongings, etc. This paper provides a theoretical methodology that uses historical shipping data to deal with the randomness. The problem is formulated as a stochastic optimization where the truck randomness is reflected by a theoretical distribution. The data analytics solution of the problem is derived, which can be easily applied in practice. Experiments using practical data reveal that the suggested approach results in a significant cost reduction, compared to a simple average heuristic method. This study provides new aspects of the container loading problem and the efficient solving approach, which can be widely applied in diverse industries using 3PL providers.

• Smart Structures and Systems
• /
• v.6 no.4
• /
• pp.405-421
• /
• 2010

This paper proposes a method for early warning of hazard for pipelines. Many pipelines transport dangerous contents so that any damage incurred might lead to catastrophic consequences. However, most of these damages are usually a result of surrounding third-party activities, mainly the constructions. In order to prevent accidents and disasters, detection of potential hazards from third-party activities is indispensable. This paper focuses on recognizing the running of construction machines because they indicate the activity of the constructions. Acoustic information is applied for the recognition and a novel pipeline monitoring approach is proposed. Principal Component Analysis (PCA) is applied. The obtained Eigenvalues are regarded as the special signature and thus used for building feature vectors. One-class Support Vector Machine (SVM) is used for the classifier. The denoising ability of PCA can make it robust to noise interference, while the powerful classifying ability of SVM can provide good recognition results. Some related issues such as standardization are also studied and discussed. On-site experiments are conducted and results prove the effectiveness of the proposed early warning method. Thus the possible hazards can be prevented and the integrity of pipelines can be ensured.

• Journal of Korean Neurosurgical Society
• /
• v.43 no.2
• /
• pp.85-89
• /
• 2008

Objective: The purpose of this study is to identify the factors affecting the failure of trials (<50% pain reduction in pain for trial period) to improve success rate of spinal cord stimulation (SCS) trial. Methods: A retrospective review of the failed trials (44 patients, 36.1 %) among the patients (n=122) who underwent SCS trial between January 1990 and December 1998 was conducted. We reviewed the causes of failed trial stimulation, age, sex, etiology of pain, type of electrode, and third party support. Results: Of the 44 patients, 65.9% showed unacceptable pain relief in spite of sufficient paresthesia on the pain area with trial stimulation. Four of six patients felt insufficient paresthesia with stimulation had the lesions of the spinal cord. Seventy five percent of the patients experienced unpleasant or painful sensation during stimulation had allodynia dominant pain. Third-party involvement, sex, age and electrode type had no influence on the outcome. Conclusion: We conclude that SCS trial is less effective for patients with neuropathic pain of cord lesions, postherpetic neuropathy or post-amputation state. Further, patients with allodynia dominant pain can feel unpleasant or painful during trial stimulation.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.4
• /
• pp.13-24
• /
• 2019

Purpose - This research explores the impacts of third-party logistics (3PLs) within the aircraft Maintenance, Repair and Overhaul (MRO) industry in the United Arab Emirates (UAE) to explore the role of collaborative relationships for improving outsourcing. Globalization and time based competition have changed business environments and challenged the conventional management strategies that are related to core competencies and operational models. Organizations are forced to devise innovative practices in which logistics outsourcing to 3PLs offers significant advantages. Research design, data, and methodology - This case study was conducted within a leading global aircraft MRO organization whose reach spans across Europe, the Middle East, Asia and the Americas. The methods used face to face semi-structured interviews, validated through further focus group discussions. Results - These findings highlight the effectiveness of collaborative relationships on their role to improve outsourcing and also demonstrated that MROs gain several advantages from 3PL arrangements. However, any gaps in outsourcing management elevates potential risks to organizations as well, which could result in reputational, operational and financial losses. Conclusions - Although generalizability is not possible due to the case study approach, generality suggests that in order to reduce reputational, operational and financial risks, enhanced collaboration with 3PLs is recommended to optimize outsourcing arrangements.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.68
• /
• pp.149-169
• /
• 2015

Recently, it's a trend that the third party outsourcing logistics will be increased a logistics flow from law material to final products. The government also works on promoting logistics company as securing the expertise for strengthen logistics industry and secure competitiveness. Nevertheless, logistics market have been divided by polarization between small logistics company and major company. Also a labor who work for logistics is being caused by worsened working conditions. That is one of results of the survey. Almost 50% of response are they have not been aware of FTA and have not known to need the FTA. Many respondents said that entering the overseas logistics or a new way like FTA will be difficult to take part in. Therefore I suggest several examples in this paper to encourage a vitalization of small logistics company through the multilateral FTA. Now our country needs to make an effort to maximize connections between multilateral FTA and policy effect by signing FTA with many countries and extending Economic territory. This effect can completely cope with the improvement of economic interests, establishing regional integration strategy and change of global supply chain. Therefore, a small business logistics have to make their competitiveness & a new dealing market in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.721-727
• /
• 2015

The improvement of the reliability of weapon systems and the reduction of the total life-cycle cost based on the improving of the DT&E system for Company Organized weapon systems research and development are urgently required. The major advanced countries operate test and evaluation centers for military (U.S.), manage a large scale organization of IPT personnel (England) or conduct management of DT&E through a third party organization (France). Based on a survey of experts, an improvement of the DT&E policy in terms of reliability and objectiveness is needed, and management through a third party national defense agency and civilian agency such as the Surion development case is required. In addition, although it appears that efficiency improves when management of DT&E is performed by national defence agencies rather than civilian agencies, it is necessary to proceed by selecting a civilian agency based on competition in the case that it is difficult to select a national defence agency.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.137-146
• /
• 2002

The benefit of TPL(Third-party Logistics) is reduction of transportation time, accuracy, improved expertise knowledge and access to logistics information system, improved operational efficiency, improved customer service, ability to focus in core business and greater flexibility. On the contrary, the defect of TPL is loss of control, unreliable promise of the enterprise (provider),inability to respond to logistics system requirement, lack of understanding of the user business goals . This thesis aims to suggest the optimal strategic to improve the logistics system and to satisfy the customer needs and also aims to suggest the TPL method to strengthen the TPL companies. And strategic plan Total (enterprise-TPL-customer) Logistics Information System(TLSI) of TPL operation. focused on transportation service and mechanism to use GPS model.