• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.71-75
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process have been utilized for providing through-thickness reinforcements. 2D preforms were stacked with S-2 glass plain weave and S-2 glass MWK (Multi-axial Warp Knit) L type. 3D preforms were fabricated using the stitching process. All composite samples were fabricated by RTM (Resin Transfer Molding) process. To examine the damage resistance performance the low speed drop weight impact test has been carried out. For the assessment of damage after the impact loading, specimens were examined by scanning image. CAI (Compressive After Impact) tests were also conducted to evaluate residual compressive strength. Compared with 2D composites, the damage area of 3D composites was reduced by 20-30% and the CAI strength showed 5-10% improvement.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6602-6609
• /
• 2013

돈사에서 발생하는 악취로 인한 주변지역 영향을 EPA가 권장하는 ISCST3 모델을 적용하여 악취모델링을 실시하여 복합악취 기준과 비교하고 악취 저감대책을 수립하는데 기초자료로 활용하고자 하였다. 돈사 악취의 영향을 분석하기 위하여 자돈과 성돈에 따라서 평균치와 최소, 최대치로 분류하여 악취 농도를 예측하였다. 양돈장의 혼합 악취의 예측 결과에서 인접 건물들은 허용한계를 초과하나 양돈장으로부터 185m 떨어진 거리에 있는 피해지역에서는 허용한계를 만족하였다. 허용한계에 대한 악취 배출량을 확인하기 위해 관리동에서 누출량을 측정하였으며 누출량 50%, 30%, 10% 기준으로 악취 농도를 예측한 결과는 관리동에서 1hr 기준 최대 발생량이 10.59~52.93, 19.05~31.76, 10.59 $OU/m^3/s/m^2$로 수인한도 10.00 $OU/m^3/s/m^2$를 다소 초과하는 것으로 예측되었으나, 누출량을 10% 미만으로 관리시 수인한도를 만족할 수 있을 것으로 판단된다.

• Advances in environmental research
• /
• 제3권1호
• /
• pp.71-86
• /
• 2014

Macronutrients ($Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$), yield and yield components, bioaccumulation and translocation of metal in plant parts of three Vigna species (V. cylindrica, V. mungo, V. radiata) were evaluated at 0, 50, 100 and $150mgkg^{-1}$ soil of Nickel (Ni). A marked inhibition (p < 0.001) in the distribution of various macronutrients was noticed in these Vigna species except for $Mg^{2+}$ content of the shoot and leaves. Similarly, all species retained more $Ca^{2+}$ in their roots (p < 0.05) as compared to the aerial tissues. Ni induced a drastic decline (p < 0.001) for various yield and yield attributes except for 100 seed weight. Toxicity and accumulation of Ni in plant tissues considerably increased in a concentration dependent manner. Vigna species signify an exclusion approach for Ni tolerance as both bioaccumulation factor (BF) and translocation factor (TF) were less than 1.0. The Ni content of plants being root > shoot > leaves > seeds. Scoring for percentage stimulation and inhibition (respective to control) at varying levels of Ni revealed tolerance of the species in an order of V. radiata > V. cylindrica > V. mungo. The acquisition of Ni tolerance in V. radiata seems to occur through an integrated mechanism of metal tolerance that includes sustainable macronutrients uptake, stronger roots due to greater deposition of $Ca^{2+}$in the roots, restricted transfer of Ni to above ground tissues and seeds as well as exclusion capacity of the roots to bind appreciable amount of metal to them. Thus, metal tolerant potential of V. radiata could be of great significance to remediate metal contaminated soil owing lesser impact of Ni on macro-nutrients, hence the yield.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.171-174
• /
• 2004

In order to improve the damage tolerance of the conventional laminated composites, three­dimensional fiber structures incorporated with stitching yams have been utilized in this study. From the newly developed process termed as TAPIS(TApe Placement Incorporated with Stitching), carbon/epoxy composites have been fabricated. Two-dimensional composites with the same stacking sequence as 3D counterparts have also been fabricated for the property comparison. To examine the damage resistance performance the low speed drop weight impact test has been adopted. For the assessment of damage after the impact loading, specimens were subjected to C-scan nondestructive inspection compression after impact(CAI) were also conducted to evaluate residual compressive strength. Although the damage area of 3D composites was greatly reduced$(30-40\%)$ compared with that of 2D composites, the CAI strength did not show drastic improvement.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.345-352
• /
• 2011

This paper focuses on the properties analysis of 9mm bullet dual structure core to substitute current lead core by environment-friendly combination of W-Cu-Ni system high density composite materials. So the four combination samples were made of dual core with the different center of gravity location backward or forward compare to that of lead type bullet, and we experimented about the performance of 9mm bullet dual structure core. In the experimental results, the outer shape of core of four environment friendly samples on the target maintain marginally, while the current lead core bullets are completely crushed after hitting the target. The penetration depth of environment friendly samples excel seven times to lead type bullet and the three out of four samples with forward adjusted center of gravity penetrate deep as twice as ones backward. The impact tolerance of all four samples satisfies military specification, however, more firing tests are required to improve reliability of scattering distribution.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.440-449
• /
• 2003

Residual strength of fiber metal laminates after impact was studied. 3/4 lay up FML was fabricated using 4 ply prepreg, 2 ply aluminum sheets, and 1 ply steel sheet. Quasi isotropic ([0/45/90/-45]s) and orthotropic ([0/90/0/90]s) FRP were also fabricated to compare with FML. Impact test were conducted by using instrumented drop weight impact machine (Dynatup, Model 8250). Penetration load and absorbed energy of FML were superior to those of FRPs. Tensile tests were conducted to evaluate the residual strength after impact. Strength degradation of FML was less than that of FRP. This means that the damage tolerance of FML is excellent than that of FRP. Residual strength of each specimen was predicted by using Whitney and Nuismer(WN) Model. Impact damage area is assumed as a circular notch in WN model. Damage width is defined as the average of back face and top face damage width of each specimen. Average stress and point stress criterions were used to calculate the characteristic length. It is supposing that a characteristic length is a constant. The distribution of characteristic length shows that the assumption is reasonable. Prediction was well matched with experiment under both stress criterions.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.139-146
• /
• 2020

The domain of entrepreneurship has been dotted across various paradigms. Identifying and examining entrepreneurial intention and propensity to it spontaneously require the insight from the lens of psychological approach. The aim of this study is to examine the influence and impact of psychological factors on entrepreneurial intention; as it is found that in Bangladeshi context several entrepreneurship studies are undertaken, still the exploratory research on interplay between the psychological factors (i.e., self-confidence, locus of control, need for achievement, and tolerance for ambiguity) and entrepreneurial intention has been merely found. The study has chosen Bangladeshi university students as the unit of analysis and the ultimate sample size in this research is n=265. The current paper is a quantitative study where sampling method is followed by convenience sampling technique, and study data is collected through survey questionnaire. Data has been compiled into SPSS whereas, for hypotheses assessment, Smart PLS software is applied. The results reflect that self-confidence, locus of control, and need for achievement are revealed as contributory determinants of entrepreneurial intention while tolerance for ambiguity is found as an insignificant predictor. The current research is expected to offer an in-depth understanding about the significance of psychological factors in examining entrepreneurial intention.

• Journal of Information Processing Systems
• /
• 제7권3호
• /
• pp.435-446
• /
• 2011

Microprocessors are becoming increasingly vulnerable to soft errors due to the current trends of semiconductor technology scaling. Traditional redundant multi-threading architectures provide perfect fault tolerance by re-executing all the computations. However, such a full re-execution technique significantly increases the verification workload on the processor resources, resulting in severe performance degradation. This paper presents a pro-active verification management approach to mitigate the verification workload to increase its performance with a minimal effect on overall reliability. An anomaly-speculation-based filter checker is proposed to guide a verification priority before the re-execution process starts. This technique is accomplished by exploiting a value similarity property, which is defined by a frequent occurrence of partially identical values. Based on the biased distribution of similarity distance measure, this paper investigates further application to exploit similar values for soft error tolerance with anomaly speculation. Extensive measurements prove that the majority of instructions produce values, which are different from the previous result value, only in a few bits. Experimental results show that the proposed scheme accelerates the processor to be 180% faster than traditional fully-fault-tolerant processor with a minimal impact on overall soft error rate.

• 한국재료학회지
• /
• 제2권5호
• /
• pp.366-374
• /
• 1992

S-2유리섬유직물과 폴리에스터 수지로 구성된 적충복합재료를 케블라 49 Thread로 1/2인치, 1인치 2인치 간격으로 스티칭하여 스티칭 간격에 따른 물성과 충격 강도의 변화로부터 최적스티칭 조건을 구하였으며 또한 스티칭하지 않은 적층복합재료와의 물성차를 비교연구하였다. 인장실험과 3점굽힘실험을 통해 시편의 종류별 기본 물성을 알아보았고, 234.7J의 충격에너지를 가해 시편의 파단 현상과 에너지 흡수 능력을 조사하였다. 파단에너지의 약 50% 정도인 110.2J의 충격에너지로 3회 반복실험하여 시편의 손상정도와 충격강도를 비교 검토하였다. 인장실험과 굽힘 실험의 결과 1인치 간격으로 스티칭한 시편이 가장 높은 강도를 보였으며, 충격실험에서도 가장 뛰어난 에너지 흡수능력 및 손상에 대한 저항을 보였다. 반복충격 실험의 결과 스티칭하지 않은 시편은 현저한 충격강도의 감소를 보인 반면 스티칭한 시편은 반복충격에도 에너지 흡수능력이 우수하게 유지되었다. C-scanning으로 손상부위를 관찰한 결과 스티칭으로 인해 손상영역의 확산이 억제되어 현저히 감소함을 보여주었다. 스티칭 간격이 너무 조밀한 경우 강도의 향상보다는 스티칭으로 인한 손상이 더 커져서 1/2인치 간격으로 스티팅한 시편의 경우는 인장강력이나 충격에너지 흡수가 스티칭하지 않은 시편에 비해 오히려 감소하는 결과를 나타내었다. 그러나 이러한 감소에도 불구하고 외부충격에 의한 손상영역의 확산은 효과적으로 억제되어 국부적인 손상만이 발생함을 알 수 있었다.

• 한국음향학회지
• /
• 제37권4호
• /
• pp.206-214
• /
• 2018

본 논문은 마이크로폰 음향 센서를 이용한 소총화기 탄착점 추정 알고리즘을 제안하였다. 제안된 알고리즘은 기존 신호 도착시간(Time of Arrival, ToA) 방식을 신호 도착 시간 차(Time Difference of Arrival, TDoA) 방식으로 확장 발전시켜 시간 동기화 문제를 해결하였고, 실제 사격 실험을 통해 알고리즘의 성능을 검증하였다. 실제 탄착점과 알고리즘으로 연산된 탄착점의 비교 분석을 통해 제안 시스템이 허용 오차 범위 내에서 정확히 탄착점을 추정하고 있어 우수한 성능을 보이고 있음을 확인하였다.