• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.598-606
• /
• 2001

A mathematical model is proposed that can depict the kinetics of simultaneous saccharification and fermentation (SSF) using steam-exploded wood(SEW) with a glucose- and cellobiose-fermenting yeast strain. Brettanomyces custersii. An expression to describe the reduction of the relative digestibility during the hydrolysis of the SEW is introduced in the hydrolysis model. The fermentation model also takes two new factors into account, that is, the effects of the inhibitory compounds present in the SEW hydrolysates on the microorganism and the fermenting ability of Brettanomyces custersii, which can use both glucose and cellobiose as carbon sources. The model equations were used to simulate the hydrolysis of the SEW, the fermentation of the SEW hydrolysates, and a batch SSF, and the results were compared with the experimental data. The model was found to be capable of representing ethanol production over a range of substrate concentrations. Accordingly, the limiting factors in ethanol production by SSF under the high concentration of the SEW were identified as the effect of inhibitory compounds present in the SEW, the enzyme deactivation, and a limitation in the digestibility based on the physical condition of the substrate.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.591-606
• /
• 2022

When the friction pendulum system and shear keys work together to resist the ground motion, which inclined inputs (non 45°) to the bridge structure, the shear keys in XY direction will be sheared asynchronously, endowed the friction pendulum system with a violent curvilinear motion on the sliding surface during earthquakes. In view of this situation, firstly, this paper abandons the equivalent linearization model of friction and constructs a Spring-Coulomb friction plane isolation system with XY shear keys, and then makes a detailed mechanical analysis of the movement process of friction pendulum system, next, this paper establishes the mathematical model of structural time history response calculation by using the step-by-step integration method, finally, it compiles the corresponding computer program to realize the numerical calculation. The results show that the calculation method in this paper takes advantage of the characteristic that the friction force is always µmg, and creatively uses the "circle making method" to express the change process of the friction force and resultant force of the friction pendulum system in any calculation time step, which can effectively solve the temporal nonlinear action of the plane friction; Compared with the response obtained by the calculation method in this paper, the peak values of acceleration response and displacement response calculated by the unidirectional calculation model, which used in the traditional research of the friction pendulum system, are smaller, so the unidirectional calculation model is not safe.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.600-606
• /
• 2013

This paper describes the development of a novel walking assistance robot for the elderly and infirm. In the case of simple walking assistance devices, the walking safety and effectiveness are somewhat low; hence, caregivers are frequently required. The walking assistance robot developed in this research is capable of securely and conveniently assisting a walking user by using electric motors and various devices without a caregiver. The main features include the following. First, the walking safety is improved by using a pelvis supporter, and the robot is able to follow the user effectively by means of ergonomic motion sensors and electric powered wheels. Second, it is possible to adjust the load applied to the lower body by adjusting the height of the pelvis supporter. Finally, it is possible to inform the approximate distance and direction of any obstacle around the robot using the sounds and vibrations for the blind and the hearing impaired. The performance of the developed walking assistance robot was successfully verified using a walking assistance test in a narrow-corridor environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.592-606
• /
• 2011

Currently, the development of multimedia communication has progressed so rapidly that the video program service has become a requirement for ordinary customers. The quality of experience (QoE) for the visual signal is of the fundamental importance for numerous image and video processing applications, where the goal of video quality assessment (VQA) is to automatically measure the quality of the visual signal in agreement with the human judgment of the video quality. Considering the codec effect to the video quality, in this paper an efficient non-reference (NR) VQA algorithm is proposed which estimates the video quality (VQ) only by utilizing the distorted video signal at the destination. The VQA feature vectors (FVs) which have high relationships with the subjective quality of the distorted video are investigated, and a hybrid NR VQA (HNRVQA) function is established by considering the multiple FVs. The simulation results, testing on the SDTV programming provided by VCEG Phase I, show that the proposed algorithm can represent the VQ accurately, and it can be used to replace the subjective VQA to measure the quality of the video signal automatically at the destinations.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.595-606
• /
• 2020

This paper aims to develop a conceptual framework for evaluating the impact of factors influencing the decision of Vietnamese students to study English in the Philippines. The empirical analysis used data from the survey data of 318 respondents living in Vietnam. Comprehensive, valid, and reliable tools (SPSS 26 software) are used to analyze and verify the gathered data, and the hypotheses developed. The results identified the factors that affect the decision of Vietnamese students to study English in the Philippines include knowledge and awareness, personality recommendation, cost issues, environment, geographic proximity, and social link. Based on the overall findings of this study, several implications are presented for educational practices in academies and schools about English teaching in the Philippines. To increase the ability to get students to study English in the country, it is important that schools or academies must understand the demands of students regarding the academic environment, and in particular, to know what factors determine the decision from the customers' point of view. This study contributes significantly to the understanding of agencies and educational managers about the student's choice behavior in the context of the need to improve foreign languages and, thus, help improve the competitiveness of agencies and English schools.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.606-615
• /
• 2009

Estimating the reasonable construction-cost according to the construction phase in public construction is an important element for securing and executing a national budget efficiently. As a general rule, the predetermined cost of construction is estimated at the end of the design of the target structure. Therefore, it seems to be a considerably difficult problem to estimate the approximate cost of construction, only with its basic information of the bridge in the design planning phase and the early design stage where we can not have specific detailed-section of the target structure. In this paper, we present the calculation of construction-cost in the planning phase based on the analysis of factors affecting the cost of construction conducted in the previous study. Beside, to estimate the cost of construction in early design phase, we would like to present the calculation of construction-cost in the early design phase by executing the analysis of data collected from 61 steel box bridges. It was found from the result of study that the estimated cost of construction gained by the calculation of construction-cost in this paper reduces the error between the real cost of construction and that by the existing method of using.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.6
• /
• pp.599-606
• /
• 2014

Since the accuracy of Global Positioning System (GPS)-based vehicle positioning system is significantly degraded or does not work appropriately in the urban canyon, the integration techniques of GPS with Inertial Navigation System (INS) have intensively been developed to improve the continuity and reliability of positioning. However, its accuracy is degraded as INS errors are not properly corrected due to the GPS signal blockage. Recently, the image-based positioning techniques have been started to apply for the vehicle positioning for the advanced in processing techniques as well as the increased the number of cars installing the camera. In this study, Single Photo Resection (SPR), which calculates the camera exterior orientation parameters using the Ground Control Points (GCPs,) has been integrated with the INS/GPS for continuous and stable positioning. The INS/GPS/SPR integration was implemented in both of a loosely and a tightly coupled modes, based on the Extended Kalman Filter (EKF). In order to analyze the performance of INS/SPR integration during the GPS outage, the simulation tests were conducted with a consideration of factors affecting SPR performance. The results demonstrate that the accuracy of INS/SPR integration is depended on magnitudes of the GCP errors and SPR processing intervals. Additionally, the simulation results suggest some required conditions to achieve accurate and continuous positioning, used the INS/SPR integration.

• Journal of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.83-94
• /
• 1997

We have identified the candidates for the primordial galaxies in the process of formation in the Hubble Deep Field (hereafter HDF). In order to select these objects we have removed objects brighter than 29-th magnitude in the HDF images and smoothed the maps with the Gaussian filters with the FWHM of 0.8' and 4' to obtain the difference maps. This has enabled us to find. very faint diffuse structures close to the sky level. Peaks are identified in the difference map for each of three HDF chips with three filters (F450W, F606W, and F814W). They have the apparent AB magnitudes typically between 29 and 31. The objects identified in different wavelengths filters have a strong cross-correlations. The correlation lengths are about 0.8'. This means that an object found in one filter can be also found as a peak within 0.8' separation in another filter, thus telling the reality of the identified objects. This angular scale is also the size of the primordial galaxies which have strong color fluctuations on their surfaces. Their large-scale distribution quite resembles that of nearby galaxies, supporting the idea that these objects are ancestors of the present bright galaxies forming at statistically high density regions. Inspections on individual objects show that these primordial galaxy candidates have tiny multiple glares embedded in diffuse backgrounds. Their radial light distributions are quite different from that of nearby bright galaxies. We may be now looking at the epoch of galaxy formation.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.600-606
• /
• 2008

In closed-die hot forging, a billet is formed in dies such that the flow of metal from the die cavity is restricted. Some parts can be forged in a single set of dies, whilst others, due to shape complexity and material flow limitations, must be shaped in multi sets of dies. The purpose of a performing operation is to distribute the volume of the parts such that material flow in the finisher dies will be sound. This study focused on the design of preforms, flash thickness and land width by theoretical calculation and finite element analysis, to manufacture the super hot forging product, 70MC type piston crown used in marine engine. The optimal design of preforms by the finite element analysis and the design experiment achieves adequate metal distribution without any defects and guarantees the minimum forming load and fully filling of the cavity of the die for producing the large piston crown. The maximum loads obtained by finite element analysis are compared with the results of experiments. The loads of the analysis have good agreements with those of the experiment. Results obtained using DEFORM-2D enable the designer and manufacturer of super hot forging dies to be more efficient in this field.

• Journal of Information Science Theory and Practice
• /
• v.11 no.2
• /
• pp.22-36
• /
• 2023

This study assesses the growth and distribution of research journals indexed in Scopus from 2000 through 2019, using SCImago data for journal and country ranking. A total of 15,484 journals were indexed in Scopus up till 1999, and from 2000 to 2019, 11,037 journals were indexed in Scopus at an average of 581.85 journals per year at an average annual corresponding growth of 2.74%. Of the total journals indexed in Scopus, 41.61% were indexed during the last two decades. Europe is the leading continent publishing nearly 60% of the total world journals, while Africa publishes around 1% of journals, the lowest among all the continents. The United Kingdom, United States (US), China, Brazil, Australia, and Egypt are the leading countries publishing the maximum number of journals from their respective continents. Of the total journals indexed across the world, nearly one-fourth (6,425, 24.23%) are published in the US. Still more, of the 109 journal publishing countries across the world, nearly 90% of journals are published in twenty leading journal publishing countries. Among the 27 major Scopus recognized subject disciplines, the majority (1,606, 6.06%) of journals are published in the field of medicine. The growth of research journals and the growth of research results has moved at a uniform pace, and any asymmetry between the two is bound to result either in the introduction of predatory and dubious journals or in the production of sub-standard research results.