• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.11-15
• /
• 2005

Dynamic shear moduli of isolated soy protein solutions upon heating were measured to monitor gelation. Onsets of gelation coincide with onset temperatures of denaturation in glycinin and ${\beta}$-conglycinin solutions, whereas in isolated soy proteins, onset of gelation was above denaturation temperature of ${\beta}$-conglycinin with storage modulus increasing in two steps. The first increase in storage modulus of isolated soy proteins occurred at about $78.5^{\circ}C$, while the second increase started at about $93^{\circ}C$. Gel properties of soy protein gels having different proportions of glycinin and ${\beta}$-conglycinin were measured by compression-decompression test. ${\beta}$-conglycinin was responsible for gel elasticity. Glycinin significantly increased hardness, toughness, and fracturability of gels at high heating temperature near $100^{\circ}C$. Results reveal texture of soy protein gels can be controlled by regulating ratio of glycinin to ${\beta}$-conglycinin and heating temperature.

• The Korean Journal of Ecology
• /
• v.14 no.1
• /
• pp.113-117
• /
• 1991

Comparisons of the physico-chemical properties of earthworm(Lumbricus terrestris) soil casts and top soil of red pine forests in a limestone area were carried out. The casts production durign August and September in 1990 amounted to 6∼7t/ha. The particle of top soil and casts ranged 40∼50% and 10∼20% for sand , 25∼30% and 30∼35% for silt, and 20∼25% and 55∼65% clay, respectively. Significant difference in pH value was not observed between casts and top soil. The casts had 1.4times of organic matter, 1.5times of N, 1.8times of available P, 2times of exchangeable K, 1.3times of exchangeable Ca, and 1.6times of exchangeable Mg than the top 10cm of soil did. Earthworms have altered the soil texture and increased nutrient availability through production of the soil casts in this limestone area.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.103-107
• /
• 2006

In grain oriented electrical steel process, hot band annealing has thought to be essential for obtaining good magnetic properties. New hot rolling method of heavy reduction in early hot rolling stage was applied to obtain good magnetic properties in GO process without hot band annealing. Hot rolling was carried out by varyinghot rolling reduction distribution along hot rolling pass. The heavy hot rolling reduction in rear stand improves the magnetic flux density in the case of no hot band annealing. The hot band specimens of the heavy reduction in front stand shows the elongated hot deformed microstructures in the center layer and strong {001}<110> texture.On the contrary, the heavily reduced specimens in rear stand shows the recrystallization in the center layer of hot band and strong {111}<112> and {110}<001> textures.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.423-432
• /
• 2010

In order to streamline bread making process that is time-consuming in regard to the characteristics of process, this study focused on microwave irradiation to dough and raising its temperature to monitor potential variations of dough properties and bread quality, and also examined optimum irradiation time to deduce effective ways for streamlining bread making process. According to analyze dough properties depending on microwave irradiation time, it was found that microwave heat (MWH) 2 showed the highest specific volume and oven spring of all and the lowest hardness (i.e. the highest softness). Moreover, MWH 2 scored the highest points in overall preference under sensory characteristics. As a result, it found that 80-second heating of 700 g bread dough, when exposed to microwave irradiation, contributed to the highest quality of bread.

• Korean Journal of Human Ecology
• /
• v.5 no.2
• /
• pp.23-31
• /
• 2002

Effects of autoclaving-cooling cycled waxy rice(Hwasunchalbyeo) starch(ACW) on textural and sensory properties of Injulmi were investigated. The protein, ash and lipid contents of waxy rice flour were higher than those of waxy rice starch and ACW. The RS level of ACW was 8.21%. By increasing ACW content added to Injulmi, hardness and adhesiveness of Injulmi decreased, Hunter color L and a values increased and b values decreased. The sensory test showed that the hardness of Injulmi decreased, but springiness and adhesiveness increased by increasing ACW content to Injulmi. Overall Qualities of injulmi added with ACW up to 20% were similar to the non-added Injulmi.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.236-238
• /
• 2004

Functional porperties such as CL, VP and EM did not affected by the addition of chitosans, however, level and MW of chitosans affected textural properties of LFSs, resulting in harder and springer texture of LFSs containing 0.3% MME chitosan as compared to others, Approximately 9 flavor compounds were different between RFC and LFS, and the addition of chitosans did not affected volatile compounds in the LFSs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.109-114
• /
• 1998

For the purpose of improving quality of defrosted-frozen chicken leg, beef and yellow corvina, the effects of height(0mm : H0, 5mm : H5, 10mm : H10, 15mm ; H15) for microwave defrosting on their physicochemical properties were investigated. In frozen chicken leg, color values were not significant different between each treatment while H10 and H15 had the highest score on appearance. Hardness of defrosted chicken leg was increased as height increased. In frozen beef, temperature of beef after defrosting increased as hight increase and H10 had the highest appearance score. In frozen yellow corvina, H10 had the highest hardness and appearance scores. Physicochemical properties of color, texture and appearance of microwave-defrosted frozen food were changed by height within microwave oven.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.90-97
• /
• 1994

Effect of addition of oil , sucrose, dextrin and oil-sucrose (1 : 1 w/w) mixture on SPI tofu was investigated. The characteristics measured were yield , water holding capacity , textural and organoleptic properties. THe SPI tofufwas prepared by coagulation of soyprotein isolate (SP) suspensino by CaCl$_2$ , CaSo$_4$ an dGDL , followed by compression . Addition of oil to SPI increased the tofu yield and water holding capacity, particulary for those tofu coagulated by CaCl$_2$. Eventhough dextrin addition decreased the yield, it showed the most improving effect on water holding capacity. The tofu prepared by CaSO$_4$coagulant resulted highest in yield and water holding capacity. Hardness was found to be decreased as the oil, sucrose and dextrin added more and adhesiveness, cohesiveness and guminess were also affected. The sensory evaluation showed the SPI tofu prepared by CaSO$_4$ and 10% addition of oil and sucrose mixture to be realtively high in hardness , elasticity and uniformity of the texture.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.614-622
• /
• 2015

This study was conducted to investigate the quality and antioxidant properties of white breads enhanced with broccoli powder (BP) (0%, 2.5%, 5.0%, 7.5% and 10.0%). L-value significantly decreased with increasing levels of BP, but a- and b-values increased (p<0.05). Baking loss rate, bread volume, and specific volume were reduced with the addition of BP, whereas the pH of the dough and bread weight increased. The hardness, gumminess and brittleness of breads with BP were higher than those of control breads (p<0.05). Upon sensory evaluation, the 2.5% and 5.0% BP breads showed no significant differences in color, flavor, taste, texture, or overall acceptability compared with controls (p<0.05). The 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity of bread significantly increased with increasing BP content (p<0.05). Accordingly, bread quality can be improved by the substitution of 5% BP in place of flour.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.27-29
• /
• 2003

Solution-based MOD-TFA deposition technology of YBCO layers offers a route to low-cost YBCO coated conductors. Since the structures and properties of grown thin film by MOD process are strongly influenced by chemistry of precursor solution, the chemical modification of precursor solution for MOD process are important for improvement of the electrical properties of YBCO films. In this study, the precursor solution for MOD process are modified by chemical additives and solvents. The microstructure and texture of YBCO films grown by chemically modified precursor solution were characterized with SEM/EDS, XRD.