• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.44-50
• /
• 1997

Comparative study was performed on noodle characteristics among three domestic wheat varieties (Geurumil, Eunpamil and Alchanmil) and imported one (ASW: Australian Standard White). For the noodle-related characteristics, crude protein, ash and gluten contents were measured, and rheological properties of dough, flour color difference, particle size distribution, cooking properties and sensory properties were evaluated. Crude protein content of Geurumil, Eunpamil and Alchanmil flour were 12.8%, 14.2% and 11.2%, respectively, whereas that of ASW flours was 9.1%. Ash content was the highest in Geurumil (0.56%). The yield of patent flour was the highest in Eunpamil (53.4%) among all the varieties. Higher dough stability with farinogram and maximum viscosity with amylogram were shown in Eunpamil and Alchanmil than those of ASW. The cutting force of cooked noodle from ASW was the lowest maximum, that was measured by texture analyzer. Fairly good color and sensory scores were obtained in cooked noodle of Alchanmil. Studies of noodle-related characteristics indicated that domestic Eunpamil was higher in protein content and flour yield, and Alchanmil was higher dough stability and color, when compared to those of imported ASW. Alchanmil and ASW had good scores in sensory evaluation, especially appearance and color.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.3
• /
• pp.159-163
• /
• 2007

The relationship between texture and rheological properties of mascara(oil-in-water emulsion) was analyzed in this study. The final mascara product and gelling agents(2.0 wt%) used therein, such as hydroxyethylcellulose(HC), carboxymethylcellulose(CMC), hectorite, sodium magnesium silicate (SMS), hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer(HS), and polyacrylate 13/polyisobutene/polysorbate 20 (PPP), were measured for rheological properties. As a result, HS and PPP showed the highest adhesiveness which were related to the volumizing effect of mascara. The viscosities of HC, SMS, and HS were measured at the stress range of $1{\sim}1,000s^{-1}$. SMS, with the lowest storage modulus range of $100{\sim}1,000s^{-1}$, affected the mascara in terms of smooth texture. The results of this study suggest that the rheology of gelling agents used influences the final texture of the mascara.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.187-200
• /
• 2015

The purpose of this study was to examine the quality of muffins with 0, 3, 6, 9, and 12% kale powder. The specific gravity of muffins prepared by adding kale powder was higher than the control group. The height of the muffins was not significantly different among all sample groups. The weight of muffins with 9% kale powder was higher than other samples. The volume and specific loaf volume of muffins decreased with the addition of kale powder. The baking loss rate of muffins decreased with the addition of kale powder. The moisture content of the samples with kale powder was higher than the control group, whereas pH was lower than the control group. DPPH radical scavenging activity of the control group was 25.70%, but the samples with kale powder ranged from 34.80 to 53.70%. In color, the L value decreased, but the b value increased significantly with the addition of kale powder. The hardness, springiness, cohesiveness, chewiness, and brittleness of the textural properties of the muffins significantly decrease by addiction of kale powder. Sensory evaluation scores in terms of after swallowing, appearance, flavor, taste, texture, and overall preference of groups with 3% and 6% kale powder did not show any significant differences, and the scores were higher than the control group. Based on these results, thus, using less than 6% kale powder would be proper to make muffins.

• Korean Journal of Human Ecology
• /
• v.9 no.3
• /
• pp.89-98
• /
• 2006

The purpose of this study was to investigate the properties of Seolgiddeok by mixed ratio of jujube powder and sugar. The proximate composition, water holding capacity, Hunter's color values, texture, and sensory evaluations were examined in this study. The results are as follows. Among the proximate composition of the Seolgiddeok that was made of different ratio of Jujube powder and sugar, moisture content of the control group was 43.93%. As the amount ratio of Jujube powder increased, moisture content slightly increased, and content of crude protein and crude ash was higher. The water holding capacity of Seolgiddeok by mixed ratio of jujube powder and sugar was lower as the amount ratio of Jujube powder increased. The L value, which is Hunter's color values of Seolgiddeok by mixed ratio of jujube powder and sugar, was the highest in the control group. The a and b value was the lowest in the control group and became high as the amount ratio of the jujube powder increased. As amount ratio of jujube powder increased, the hardness, the springiness, the cohesiveness, the gumminess, and the chewiness, of Seolgiddeok became high, but adhesiveness became low. In a sensory evaluation of Seolgiddeok by mixed ratio of jujube powder and sugar, the preference of texture, mouth-feel, and appearance was the highest in the control group. The preference of color, flavor and overall preference were the highest in Seolgiddeok by mixed ratio of jujube powder of 75.0g and sugar 57.6g.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.2
• /
• pp.105-118
• /
• 2015

This study was carried out to investigate the effects of profile disturbance with different artificial accumulation history on physico-chemical properties of soil under plastic film house. The investigations included soil profile description using soil column cylinder auger F10cm x h110cm, in situ and laboratory measurements of soil properties at five sites each at the cucumber (Site Ic ~ Vc) and grape (Site Ig ~ Vg) plastic film houses with artificial soil accumulation. The sites except sites Ic, IVc, IVg and Vg, belong to ex-paddy area. The types of accumulates around root zone included sandy loam soil for 3 sites, loam soil for 1 site, saprolite for 2 sites, and multi-layer with different accumulates for 3 sites. Especially, Site IIg has mixed plow zone (Ap horizon) with original soil and saprolite, whereas disturbed soil layers of the other sites are composed of only external accumulates. The soil depth disturbed by artificial accumulation ranged from 20 cm, for Site IIg, to whole measured depth of 110 cm, for Site IVc, Vc, and Site IVg. Elapsed time from artificially accumulation to investigation time ranged from 3 months, Site IIc, to more than 20 years, Site Vg, paddy-soil covering over well-drained upland soil during land leveling in 1980s. Disturbed top layer in all sites except Site Vg had no structure, indicating low structural stability. In situ infiltration rate had no correlation with texture or organic matter content, but highest value with highest variability in Site IIIc, the shortest elapsed time since sandy loam soil accumulation. Relatively low infiltration rate was observed in sites accumulated by saprolite with coarse texture, presumably because its low structural stability in the way of weathering process could result in relatively high compaction in agro-machine work or irrigation. In all cucumber sites, there were water-transport limited zone with very low permeable or impermeability within 50 cm under soil surface, but Site IIg, IIIg, and Vg, with relatively weak disturbance or structured soil, were the reverse. We observed the big change in texture and re-increase of organic matter content, available phosphate, and exchangeable cations between disturbed layer and original soil layer. This study, therefore, suggest that the accumulation of coarse material such as saprolite for cultivating cash crop under plastic film house might not improve soil drainage and structural stability, inversely showing weaker disturbance of original soil profile with higher drainage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.591-596
• /
• 2000

The effect of starches such as potato, corn and wheat starch on the rheological properties of ocean jumbo squid kamaboko was investigated. Changes in the water holding capacity and color values of those kamaboko gels was also studied using the maximum gel strength endowing starch, Wheat starch could ive the better water holding capacity and breaking stress than potato or corn starch within $10{\%}$ additional level but corn starch resulted the highest those value at $20{\%}$ added. Wheat starch had higher level of breaking strain and jelly strength at $10{\%}$ then in descending order were corn starch, potato starch. But those starches were decreased after $15{\%}$ level. Texture map showed the simple rheological properties of each starches heat gel with jumbo squid kamaboko, Corn starch map showed more tough and brittle than the other. Potato starch map showed more elastic gel than corn starch. Wheat starch map could make elastic-mushy gel. There was no significant color differences of each starches but the whiteness of each starch showed increase when the starch rate was increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1168-1175
• /
• 2012

Gel properties of Mook manufactured from acorn harvested in various countries [domestic (KAS), Chinese (CAS), and North Korea (NAS)] were analyzed according to storage period. Gel properties included water binding, syneresis of gel, DSC (differential scanning calorimetry), X-ray diffraction, SEM (scanning electron microscopy), texture, Hunter's color value, and sensory value. Water binding of NAS, CAS, and KAS were 233.8%, 217.3%, and 215.0%, respectively. Syneresis of gel from KAS, CAS, and NAS were 2.06%, 1.85%, and 1.45%, respectively, after 1 day of storage. There were significant differences upon storage for 1~3 days (p<0.05), whereas were no significant differences upon storage for 4~10 days. Peak temperature of gelatinization property by DSC was $55.28^{\circ}C$ for KAS, $54.45^{\circ}C$ for CAS, and $54.12^{\circ}C$ for NAS after 1 day of storage. Hardness of texture in NAS, KAS, and CAS were 374.9, 357.4, and 348.9, respectively, after 1 day of storage. Hunter's color L value, and a value were highest in NAS, whereas b value was the lowest in CAS. There were no significant differences in any particular sensory values.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.123-128
• /
• 1991

Addition of two different salt mixtures of sodium phosphates, Ca-EDTA, $NaNO_2$ and sodium citrate were investigated for their effects on relative viscosity, textrue, sensory properties of kimchi and solids contents of kimchi and kimchi liquid during fermentation at $4{\sim}3.5^{\circ}C$. The salt mixtures were added into half fermented kimchi with the concentration range of $0.001{\sim}0.01\;M$. The results showed that higher values in viscosity of kimchi liquids were obtained for those fermented at low temperature and with salts mixtures added. The hardness of Chinese cabbage was gernerally increased until pH 4.0 reached and then decreased thereafter for those fermented without salts mixture. However the salts added kimchi showed no decrease and a slightly harder texture measured at the late stage of fermentation. Soluble solids concentration steadly decreased in kimchi liquids for those salts mixture added while those without salts mixture were initially increased followed by slow decrease. Comparison of sensory properties showed that the degree of changes was reduced when salt mixture was added. Higher scores in fresh-sourness and acidic taste, hardness and chewiness in texture and lower moldy odor were obtained when the data was compared for those kimchi having the pH range of $4.0{\sim}4.2$.

• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.118-125
• /
• 1987

Three rice varieties of Akibare (japonica), Milyang 30 (indica) and Taebaeg (indica) were investigated for their changes in sensory and physical qualities of cooked rices during storage at the temperature range of $4^{\circ}C$ and $70^{\circ}C$ for 25 hours, The qualities studied were sensory attributes of texture which were evaluated by multiple comparison method and physical characteristics of texture measured using with rheometer. Physical Properties of hardness, adhesiveness and elasticity of cooked rices were found to be different among the rice varieties and were affected by storage conditions. Higher values in hardness and elasticity and lower values in adhesiveness were measured for cooked rices of Akibare immidiately after cooking. Those physical values were changed by a steady decrease in hardness and elasticity and increase in adhesiveness during storage for 25 hours. Correlations between sensory and physical characteristics of texture was found a significant relationships between gumminess and hardness (r=0.696), gumminess and adhesiveness (r=-0.800) and gumminess and elasticity (r=0.806).

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.308-314
• /
• 2020

A commercial AA1070 alloy for electrical wire is severely deformed by drawing process in which a rod with an initial diameter of 9mm into is reduced to a wire of 2mm diameter. The drawn AA1070 wire is then annealed at various temperatures from 200 to 450 ℃ for 2h. Changes in microstructure, mechanical properties and electrical properties of the specimens with annealing temperature are investigated in detail. The specimen begins partially to recrystallize at 250 ℃; above 300 ℃ it is covered with equiaxed recrystallized grains over all regions. Fiber textures of {110}<111> and {112}<111> components are mainly developed, and {110}<001> texture is partially developed as well. The tensile strength tends to decrease with annealing temperature due to the occurrence of recovery or/and recrystallization. On the other hand, the elongation of the annealed wire increases with the annealing temperature, and reaches a maximum value of 33.3 % at 300 ℃. Electric conductivity of the specimens increases with annealing temperature, and reaches a maximum value of 62.6 %IACS after annealing at 450 ℃. These results are discussed in comparison with those for the other aluminum alloy.