• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.397-400
• /
• 2004

Synthetic Aperture Radar(SAR) is an active micro­wave instrument that performs high-resolution observation under almost all weather conditions. Although there are many advantages of SAR instrument, many complicated steps are involved in order to generate SAR image products. Many research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. However, it is hard to find research which compare the quality of SAR products generated with different algorithms and processing methods. In our previous research, a SAR processing s/w was developed for a ground station. In addition, quality assessment procedures and their test parameters inside a SAR processor was proposed. The purpose of this paper is to evaluate the quality of SAR images generated from the developed SAR processing s/w. However, If there are no direct measurements such as radar reflector or scattering field measurement values it is difficult to compare SAR images generated with different methods. An alternative procedures and parameters for SAR image quality evaluation are presented and the problems involved in the comparison methods are discussed. Experiments based on real data have been conducted to evaluate and analyze quality of SAR images.

• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1244-1250
• /
• 1999

Job,s tears powder and green tea powder were added to bread mixture and their effects on the quality of bread were investigated using sensory evaluation and some physical tests. Sensory evaluation showed that flavor, hardness and chewiness were increased as the amount of Job's tears powder and green tea powder was increased. Lightness and redness values decreased with the addition of Job's tears powder and green tea powder, while yellowness values increased. Texture measurement showed that springiness was highest in bread with 3% green tea powder among the batches tested, while gumminess showed highest in control. Hardness of 3% green tea powder was lower than that of control. It appears that the higher the moistness, the higher the value of redness. Chewiness was positively correlated with yellowness. Gumminess was negatively correlated with color and flavor. Bread with 1% green tea powder and 10% Job's tears powder showed good overall preference. Scanning electron microscopy revealed that the addition of Job's tears powder and green tea powder to bread exhibited small pores and crude surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.214-214
• /
• 2010

The 0.65Pb($Mg_{1/3}Nb_{2/3})O_3-0.35PbTiO_3$ (PMN-PT) thin films with $La_{0.5}Sr_{0.5}CoO_{3-\delta}$ (LSCO) bottom electrodes were grown on $CeO_2$/YSZ/Si(001), Pt/$TiO_2$/Si and $SrTiO_3$ (STO) substrates using conventional pulsed laser deposition (PLD) at a substrate temperature of $550^{\circ}C$. Since generally the crystallographic orientation of the bottom electrode induces the orientation of the films deposited on it, it allows us to observe the influence of the PMN-PT film orientation on the electrical properties. Phi scan done on PMN-PT/LSCO thin films shows epitaxial behavior of the films grown on sto substrates and $CeO_2$/YSZ buffered Si(001) substrates, and (110) texture on Pt/$TiO_2$/Si substrates. Polarization-electricfield (P-E) measurement shows good hysteresis behavior of PMN-PT films with remnant polarization of 18.2, 8.8, and $4.4{\mu}C/cm^2$ on $CeO_2$/YSZ/Si, Pt/TiO2/Si and STO substrates respectively.

• International Journal of Human Ecology
• /
• 제13권1호
• /
• pp.105-115
• /
• 2012

This research investigated the influences of structural characteristics such as fabrics, mechanical properties, and subjective sensory images on the off-line and on-line preferences to women's spring/summer suits fabrics to extract the most effective factor towards preference as well as analyze the preferential off-line and on-line differences to predict the exact texture image on-line. Objective evaluations were done for the measurement of the mechanical properties of fabrics using Kawabata's Evaluation System and subjective evaluations were done with 109 female subjects who value the off-line and on-line sensory image of suit fabrics. For statistical analysis, factor analysis, cluster analysis, t-test, ANOVA, and regression were used. The results were as follows. The preference scores on-line were generally higher than those off-line. For the structural characteristics of fabrics, differences of thickness were observed according to preference clusters, and the preference increased as thickness was lowered off-line and on-line. For mechanical properties, WC influenced off-line and on-line preferences. Fabrics with low compression energy were preferred; however, the effect of SMD was observed off-line only. In subjective sensory images, the 'smoothness' image influenced off-line and on-line preferences the most. All sensory images influenced the off-line preferences; however, the effects of 'flexibility' and 'weight' were not shown on-line.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.455-462
• /
• 2015

A feature line is a visually noticeable creased line on outer automotive panels. Feature lines play an important role in creating a good impression of a car. Even though the manufacturing quality of feature lines is important, it is difficult to achieve the designed shape owing to the springback of sheet metal. The current study presents five methods of making samples that will be used in a visual experiment to discover a quality control quantitative manufacturing allowance for feature lines. Measurement and inspection methods for the samples are also presented. The results show that plunge machining is the most accurate way to make the desired shape, and that wrapping the machined surface with sheet film is an appropriate way to emulate the roughness and visual texture of the painted outer panels of a car.

• 한국식품영양학회지
• /
• 제10권3호
• /
• pp.339-343
• /
• 1997

소맥분 및 복합분들에 관한 amylogram 특성치, 조리시험, 색도 및 관능검사를 실시하여 알아본 결과는 달음과 같다. 복합분의 amylogram의 특성치는 20% 밤가루 첨가구까지 밀가루 면의 점도 특성에 접근하였다. 조리시험에서는 밤가루의 배합비가 증가할수록 조리면의 중량, 부피는 약간씩 감소되었고 흡광도는 약간씩 증가되었으나 30% 밤가루가 첨가될 때까지는 밀가루 면과의 큰 차이를 보이지 않았다. 조리면의 색차($\Delta$E)가 밀가루 면과의 비교에서 B, C면은 noticeable로 나타났으나 D면 이상은 appreciable로 나타났다. 관능검사의 경우, 색도는 30% 밤가루 첨가구까지 밀가루 면과 유의차가 없었으나 조직감에서는 밤가루 10% 첨가구만이 유의차가 없었다.

• 한국식품조리과학회지
• /
• 제6권2호
• /
• pp.1-6
• /
• 1990

The purpose of this study was to investigate the effects of preheating and salt concentration on the fermentation rate and firmness of cucumber kimchi, and the relationship between firmness and the contents of pectin fractions, hemicellulose and cellulose during fermentation. For this purpose, pH, acidity, firmness and the contents of pectic fractions, hemicellulose and cellulose were studied. 1. The changes of pH and titratable acidity indicated that preheating and high salt concentration delayed the fermentation rate in cucumber kimchi. 2. After 9 days, preheated cucumber kimchi was firmer than nonpreheated cucumber kimchi. 3. During fermentation, the cucumber kimchi fermented at 5% NaCl was firmer than that femented at 2% NaCl. 4. After 9 days, preheated cucumber kimchi was higher in insoluble pectin (HCISP)content and lower in soluble pectin (HWSP & HXSP) content than nonpreheated cucumberkimchi and hese results in accord with those of firmness measurements. 5. During fermentation, the cucumber kimchi fermented at 5% NaCl was higher in insoluble pectin content and lower in soluble pectin content than nonpreheated cucumber kimchi, and these results were in accord with those of firmness measurement. 6. During fermentation, cellulose content decreased.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.104-109
• /
• 2011

The present study investigated experimentally the spreading characteristics of a single liquid impinging on the inclined micro-textured aluminum (Al 6061) surfaces manufactured by using a micro computerized numerical control (${\mu}$-CNC) milling machine. The textured surfaces were composed of patterned micro-holes (diameter of $125\;{\mu}m$ and depth of $125\;{\mu}m$). In our experiment, the de-ionized (DI) water droplet of $4.3\;{\mu}l$ was impinged normally on the non-textured and textured surfaces at two different Weber numbers, and the droplet impinged on the inclined surfaces with different angles. A high speed camera was used to capture sequential digital images for measurement of the maximum spreading distance. It was found that for the textured surface, the measured apparent equilibrium contact angle (ECA) increased up to $105.8^{\circ}$, higher than the measured ECA of $87.6^{\circ}$ for the non-textured (bare) surface. In addition, it is conjectured that the spreading distance decreased because of a liquid penetration during droplet spreading through the holes, the increase in hydrophobicity, and viscous dissipation during impact process.

• 한국식품조리과학회지
• /
• 제5권2호
• /
• pp.19-25
• /
• 1989

In order to maks use of Adlay widely, it was analyzed and determined the content of amylose, amylopection. And Ju-ak was made from glutinous rice flours with vairous mixing ratio of Adlay flours and then this was tested for suitability to preparation of Ju-ak. Evaluation was conducted through sensory evaluation and objcetive evaluation. The results are as follow: 1. The content of moisture, total ash, crude protein, crude fat, and carbohydrate in Adlay were shown to be about 10.58%, 84.4%, 17.3%, 3.76%, 66.52%. 2. The amylose and amylopectin content were 15.6%, 84.4%. 3. By the sensory evaluation results the taste of Ju-ak prepared with mixing of 25% and 50% Adlay flour was better than glutinous rice Ju-ak but 75% and 100% mixed flour were undersirable. 4. By the Instron measurement results that hardness tend to increass as the additon level of Adlay increased. Gumminess, Chewiness and Elasticity was not significantly different as the addition level of Adlay increased. Conhesiveness tend to decrease as the addition level of Adlay. 5. Consistency of Ju-ak had significant relationship with hardness and cohesiveness. Moistness had significant relationship with hardness, elasticity, cohesiveness and chewiness. Texture of Ju-ak had significant relationship with hardness, elasticity, cohesiveness and gumminess.

• 한국식품영양학회지
• /
• 제27권2호
• /
• pp.318-329
• /
• 2014

The purpose of this study was to determine the optimal mixing ratio of Allium hookeri powder and butter in the preparation of bread. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 10 experimental points, including 2 replicates for Allium hookeri powder and butter. Further, the mechanical and sensory properties of test materials were measured. A canonical form and perturbation plot conveyed the influence of each ingredient on the final product mixture. Overall, the measurement results of the mechanical properties showed a significant increase or decrease in dough pH, sweetness, volume, weight, height, specific volume, a & b-value of crumb and, springiness (p<0.05). Moreover, the sensory measurements demonstrated a significant improvement in color, appearance, texture, moistness and, overall quality. As a result, the optimum formulation from the numerical and graphical methods was calculated as 22.65 g of Allium hookeri powder and 47.77 g butter. After optimization, DPPH free radical scavenging activity, total phenolic content, and total plate counts over 10 days were evaluated. In sum, the results revealed the antioxidant and antibiotic actions of bread with Allium hookeri powder.