• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.63.2-63.2
• /
• 2011

결정질 실리콘 웨이퍼를 이용한 고효율 태양전지를 제작하기 위해서는 반드시 고려해야 할 주요 인자들이 있다. 그 중에서도 Base resistivity, Thickness, Doping concentration, Texture size, Texture angle등의 주요 인자를 PC1D 시뮬레이션 프로그램을 이용하여 최적화 해 보았다. 그 결과, Base resistivity값은 낮을수록 좋으나 지나치게 낮을 경우 재결합으로 인해 효율이 떨어지기 때문에 Base resistivity = $1{\Omega}{\cdot}cm$에서 최대 효율을 얻을 수 있었다. 또한, Thickness는 두꺼울수록 R=${\rho}$(L/A)의 식에 의해 직렬저항이 증가하여 효율이 감소하므로 Thickness = $200{\mu}m$ 정도가 적정 값임을 확인할 수 있었다. Doping concentration의 경우 높을수록 재결합으로 인해 효율이 떨어지며 Doping concentration = $3.69{\times}10^{-20}cm^{-3}$에서 가장 좋은 효율을 보였다. Textrure size와 Textrure angle은 그 값이 클수록 빛의 흡수 정도가 증가해 효율이 증가함을 볼 수 있었고 Textrure size = $2{\sim}4{\mu}m$, Texture angle = $79^{\circ}$에서 높은 효율을 보여주었다. 이와 같은 조건에서 고효율 태양전지를 제작을 위한 시뮬레이션을 한 결과, 16.23%의 변환효율을 얻을 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.938-945
• /
• 2003

We fabricated Ni-substrate for YBCO coated conductors and evaluated the effects of pressing and annealing temperature and time on texture. Ni substrate was fabricated by powder metallurgy technique and compacts were prepared by applying uniaxial or isostatic pressure. The texture of substrate made by applying cold isostatic pressure (CIP) was stronger than that by uniaxial pressure which we attribute to the fact that the CIP method provided higher density and more uniform density distribution. It was observed that the substrate annealed at 400 C showed both retained texture and recrystallized texture. On the other hand, the texture of substrate significantly improved at annealing temperature above 500 C, forming strong 4-fold symmetry, [111] II ND texture, and FWHM of 9∼10 . It is to be noted that the degree of texture was almost independent of annealing temperature (500∼1000 C) and annealing time(1∼54 min, at 1000 C). EBSD and AFM analysis indicated that 99% of grain boundaries was low angle grain boundary and RMS was approximately 3 nm, respectively. Development of strong cube texture and high fraction of low angle grain boundary of Ni-substrate made by powder metallurgy technique in our study is considered to be suitable for the application of YBCO coated conductors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.608-610
• /
• 2003

In the paper, we have investigated the reflective cholesteric display based on the polymer stabilization. The bistability in the polymer stabilized cholesteric texture(PSCT) films was observed and wider viewing angle was achieved due to imperfect planar texture.

• Journal of Information Display
• /
• 제4권3호
• /
• pp.26-28
• /
• 2003

In the paper, we investigated the Bragg reflective cholesteric display based on polymer stabilization. We studied the bistability in the polymer stabilized cholesteric texture (PSCT) films and baused on which we achieved wider viewing angle though imperfect planar texture.

• 한국통신학회논문지
• /
• 제17권3호
• /
• pp.288-296
• /
• 1992

본 논문에서는 개선된 2D QPS(Quadrature polar separable) 필터의 설계와 조직 프로세싱에 대한 응용이 논의된다. 필터의 커넬쌍은 이산 PSS에 근거한 라디얼 가중 함수와 방향각을 위한 지수 감쇄 함수의 적으로 구성되며 주파수 평면상에서 퀴드래처 극분리형이 된다. 필터는 방향각 함수를 이산 PSS에 근사화시키므로 에너지 손실면에서 최적화된다. 필터의 주파수 특성은 대역폭, 방향각, 감쇄 정수, 그리고 주파수 변이 정수와 같은 설계 명제 조건에 의존하므로 제어가 용이하다. 조직 프로세싱에 대한 필터의 응용으로 조직 영상의 생성, 방향각의 평가, 그리고 합성 조직 영상의 세그멘테이션이 고찰된다. 결과는 넓은 대역폭을 갖는 필터가 강한 방향성 조직의 생성 및 식별에 사용될 수 있다는 것과 세그멘테이션 결과도 효과적임을 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.194-197
• /
• 1997

The texture of a 0.25mm dia high-carbon(0.73%) steel wire made by drawing the patented and brass coated 1.4mm wire through 22 dies with a die-angle of 12$^{\circ}$has been measured. The ideal fiber texture was obtained in the center layer, while the circular texture and the near fiber texture having {111}<110> and weak {112}<110> components were obtained in the intermediate and surface layers, respectively. The circular texture was approximated by {110}<110> plus {110}<114>. The texture could be predicted by the Taylor-Bishop-Hill theory coupled with FEM for deformation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.136-137
• /
• 2008

태양전지의 효율은 실리콘 자체의 특성에 의해서 결정 되거나 완성된 실리콘을 통해 태양전지를 제조하는 과정에서 Texturing, Coating 등을 통해 효율을 변화 시킬 수 있다. PC1D를 이용해 Texturing, Base Resistivity, Emitter Doping등을 조절해가며 고효율 태양전지를 위한 시뮬레이션을 하였다. Texture Angle이 $80^{\circ}$, Texture Depth가 2um, Base Resistivity가 0.2[${\Omega}{\cdot}cm$], Emitter Doping이 8*Exp(19)[$cm^{-3}$]일 경우 효율이 19.9%로 최적화 되었다.

• 소성∙가공
• /
• 제29권3호
• /
• pp.127-134
• /
• 2020

It is known that the difference of texture of the polycrystalline Al sheet is not a critical parameter for the formation of aligned nanopore arrays in anodic aluminum oxide (AAO). This will be related to the polycrystalline grain in the Al sheet. The texture of each grain in the polycrystalline Al sheet is different. The mixed textures of grains have the mixing effects on the nanopore structure of the AAO. Thus, the effect of Al texture on the nanopore structure of the AAO was investigated using three types of Al single crystals with (111), (200) and (220) textures in this paper. These three types of AAO layers were fabricated by the two-step anodizing method at 40 V and temperature of 0-5℃ in oxalic acid solution. In the nanopores formed on the AAO, the average area of one nanopore and the average roundness of one nanopore were measured were measured based on the SEM images. In the hexagon obtained by connecting nanopores on the AAO, the average standard deviation of one angle deviated from 120° was measured. In the AAO nanopores with texture of (111), (200) and (220) single crystal samples, the average area of one nanopore of (200) single crystal sample was the widest, followed by (111), (220) single crystals. The average circularity of one nanopore of (200) single crystal sample was the best, followed by (111), (220) single crystals. The average standard deviation of an angle from 120° of (220) single crystal sample was the largest, followed by (111) and (200) single crystals.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.75-76
• /
• 2008

In this study, texture development and bending characteristics of strong {0002} textured were observed. AZ31 Mg alloy sheets were prepared along the angle of 0 and 12.5 degrees to the lolling direction or {0002} texture. Prepared samples with different angles to the rolling direction were rolled at room temperature condition and after subsequent heat treatment to investigate texture with x-ray diffractometer, respectively The specimen having along the angles of 0 degree to rolling direction shows the highest load and 12.5 degrees specimen shows the highest displacement among any other specimens in bending test.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.49-56
• /
• 1998

Super precision working technique and machine tool have been continually developed thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface in grinding with $mu extrm{m}$ level. There were quite many researches to satisfy these demands by using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. co-occurrence matrices was obtained from the surface roughness. Texture parameter was obtained using position operator composed of $ heta$, d according to variation of angle direction and distance. As a result, it was found that surface texture was more affected by direction($\theta$) than distance(d).