• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.127-134
• /
• 2020

It is known that the difference of texture of the polycrystalline Al sheet is not a critical parameter for the formation of aligned nanopore arrays in anodic aluminum oxide (AAO). This will be related to the polycrystalline grain in the Al sheet. The texture of each grain in the polycrystalline Al sheet is different. The mixed textures of grains have the mixing effects on the nanopore structure of the AAO. Thus, the effect of Al texture on the nanopore structure of the AAO was investigated using three types of Al single crystals with (111), (200) and (220) textures in this paper. These three types of AAO layers were fabricated by the two-step anodizing method at 40 V and temperature of 0-5℃ in oxalic acid solution. In the nanopores formed on the AAO, the average area of one nanopore and the average roundness of one nanopore were measured were measured based on the SEM images. In the hexagon obtained by connecting nanopores on the AAO, the average standard deviation of one angle deviated from 120° was measured. In the AAO nanopores with texture of (111), (200) and (220) single crystal samples, the average area of one nanopore of (200) single crystal sample was the widest, followed by (111), (220) single crystals. The average circularity of one nanopore of (200) single crystal sample was the best, followed by (111), (220) single crystals. The average standard deviation of an angle from 120° of (220) single crystal sample was the largest, followed by (111) and (200) single crystals.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.645-652
• /
• 2016

In this study, based on the analysis of texture feature values of statistical properties. And we examined the normal and the applicability of the computer-aided diagnosis of cerebral infarction in the brain computed tomography images. The experiment was analyzed to evaluate the ROC curve recognition rate of disease using six parameters representing the feature values of the texture. As a result, it showed average mean 88%, variance 92%, relative smoothness 94%, uniformity of 88%, a high disease recognition rate of entropy 84%. However, it showed a slightly lower disease recognition rate and 58% for skewness. In the analysis using ROC curve, the area under the curve for each parameter indicates 0.886 (p = 0.0001) or more, resulted in a meaningful recognition of the disease. Further, to determine the cut-off values for each parameter are determined to be the prediction of disease through the computer-aided diagnosis.

• The KIPS Transactions:PartA
• /
• v.17A no.6
• /
• pp.281-288
• /
• 2010

In this paper, we describe the development of a system for generating a 3-dimensional human face using 3D scanned facial data and photo images, and morphing animation. The system comprises a facial feature input tool, a 3-dimensional texture mapping interface, and a 3-dimensional facial morphing interface. The facial feature input tool supports texture mapping and morphing animation - facial morphing areas between two facial models are defined by inputting facial feature points interactively. The texture mapping is done first by means of three photo images - a front and two side images - of a face model. The morphing interface allows for the generation of a morphing animation between corresponding areas of two facial models after texture mapping. This system allows users to interactively generate morphing animations between two facial models, without programming, using 3D scanned facial data and photo images.

• The Korean Journal of Cytopathology
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1996

Chromatin texture, which partly reflects nuclear organization, is evolving as an important parameter indicating cell activation or transformation. In this study, chromatin pattern was evaluated by image analysis of the electron micrographs of follicular and papillary carcinoma cells of the thyroid gland and tested for discrimination of the two neoplasms. Digital grey images were converted from the electron micrographs, nuclear images, excluding nucleolus and intranuclear cytoplasmic inclusions, were obtained by segmentation; grey levels were standardized; and grey level histograms were generated. The histograms in follicular carcinoma showed Gaussian or near-Gaussian distribution and had a single peak, whereas those in papillary carcinoma had two peaks(bimodal), one at the black zone and the other at the white zone. In papillary carcinoma, the peak in the black zone represented an increased amount of heterochromatin particles and that at the white zone represented decreased electron density of euchromatin or nuclear matrix. These results indicate that the nuclei of follicular and papillary carcinoma cells differ in their chromatin pattern and the difference may be due to decondensed chromatin and/or matrix substances.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.7
• /
• pp.1029-1036
• /
• 2016

This study investigated the degree to which instrumental measurements explain the variation in pork loin tenderness as assessed by the sensory evaluation of trained panelists. Warner-Bratzler shear force (WBS) had a significant relationship with the sensory tenderness variables, such as softness, initial tenderness, chewiness, and rate of breakdown. In a regression analysis, WBS could account variations in these sensory variables, though only to a limited proportion of variation. On the other hand, three parameters from texture profile analysis (TPA)-hardness, gumminess, and chewiness-were significantly correlated with all sensory evaluation variables. In particular, from the result of stepwise regression analysis, TPA hardness alone explained over 15% of variation in all sensory evaluation variables, with the exception of perceptible residue. Based on these results, TPA analysis was found to be better than WBS measurement, with the TPA parameter hardness likely to prove particularly useful, in terms of predicting pork loin tenderness as rated by trained panelists. However, sensory evaluation should be conducted to investigate practical pork tenderness perceived by consumer, because both instrumental measurements could explain only a small portion (less than 20%) of the variability in sensory evaluation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1230-1235
• /
• 2017

We studied surface texture-etching of glass substrate by using reactive ion etching process with various working pressure (0.7~9.0 mT). With the increase in the pressure, a haze parameter, which means diffusive transmittance/total transmittance, was increased in overall wavelength regions, as measured by spectrophotometer. Also, atomic force microscopy (AFM) study also showed that the surface topography transformed from V-shaped, keen surface to U-shaped, flattened surface, which is beneficial for nanocrystalline silicon semiconductor growth with suppressing defective crack formation. The texture-etched ZnO:Al combined with textured glass exhibited pronounced haze properties that showed 60~90 % in overall spectral wavelength regions. This promising optical properties of double textured, transparent conducting substrate can be widely applied in silicon thin film photovoltaics and other optoelectronic devices.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.31-36
• /
• 2009

Micro-machining technology has been adopted for shape accuracy of micrometer and sub-micrometer scale, surface roughness of tens nanometer in industries. In micro-machining process the quality of machined surface is derived from machining condition and tooling. This paper investigates AE(acoustic emission) and cutting force signals according to machined surface quality related to machining condition. Machined surface quality was analyzed by the AE and cutting force parameter which reflect surface morphology. The characteristics of signal were extracted for process optimization by monitoring both the tool condition and the machined surface texture in micro end milling process.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.247-249
• /
• 2007

Crown parameters are important roles in tree species identification, because the canopy is the aggregate of all the crowns. However, crown measurements with spaceborne image data have remained more difficult than on aerial photographs since trees show more structural detail at higher resolutions. This recognized problem led to the initiation of the research to determine if high resolution satellite image data could be used to identify and classify single tree species. In this paper, shape parameters derived from pixel-based crown area measurements and texture features derived from GLCM parameters in QuickBird image were tested and compared for individual tree species identification. As expected, initial studies have shown that the crown parameters and the canopy texture parameters provided a differentiating method between coniferous trees and broad-leaved trees within the compartment(less than forest stand) for single extraction from spaceborne high resolution image.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.460-462
• /
• 2005

Asymmetrical rolling was performed with different working roll speeds of upper and lower rolls. In order to promote the shear deformation during asymmetrical rolling, various deformation parameters of initial sheet thickness, rolling reduction, roll speed ratio and roll radius are considered. The evolution of texture during asymmetrical rolling was shown by the calculation of orientation distribution function (ODF). The effect of deformation parameters on shea. deformation were investigated by simulations with the finite element method (FEM). Asymmetrical rolling gave rise to the development of pronounced strain gradients throughout the thickness layers which resulted in the formation of strong texture gradients in the sheet.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.75-85
• /
• 1992

The texture changes and their effect on the 0.2% yield strength of Zircaloy-4 sheet were examined after quenched from the ($\alpha$+$\beta$) phase temperature. When the prior ($\alpha$+$\beta$) gram size was slightly larger than that of the $\alpha$-annealed, the observed texture was similar to the $\alpha$-annealed texture having an ideal orientation of the (0001) basal pole at 30$^{\circ}$away from the normal direction toward the transverse direction. When the prior ($\alpha$+$\beta$) grain size was twice as large as that of the $\alpha$-annealed, the location of maximum basal pole intensity was distributed between the transverse and the rolling direction making an angle 15$^{\circ}$from the normal direction, and the observed texture became isotropic. It was found that the Kearns texture parameter, fr, in the rolling direction increased steadily, and fr in the transverse direction increased slightly, while fr in the the normal direction decreased with increasing heat treatment time. With a small increase in fr, the 0.2% yield strength increased drastically. The influence of texture was analyzed by deriving the Schmid orientation factors and the resolved shear stresses for the deformation systems. It was found that the large increase in the 0.2% yield strength was attributed mainly to the microstructural changes and partly to the texture changes by the ($\alpha$+$\beta$) heat treatment.