• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.30-39
• /
• 2006

Iris recognition is that identifies a user based on the unique iris texture patterns which has the functionalities of dilating or contracting pupil region. Iris recognition systems extract the iris pattern in iris image captured by iris recognition camera. Therefore performance of iris recognition is affected by the quality of iris image which includes iris pattern. If iris image is blurred, iris pattern is transformed. It causes FRR(False Rejection Error) to be increased. Optical defocusing is the main factor to make blurred iris images. In conventional iris recognition camera, they use two kinds of focusing methods such as lilted and auto-focusing method. In case of fixed focusing method, the users should repeatedly align their eyes in DOF(Depth of Field), while the iris recognition system acquires good focused is image. Therefore it can give much inconvenience to the users. In case of auto-focusing method, the iris recognition camera moves focus lens with auto-focusing algorithm for capturing the best focused image. However, that needs additional H/W equipment such as distance measuring sensor between users and camera lens, and motor to move focus lens. Therefore the size and cost of iris recognition camera are increased and this kind of camera cannot be used for small sized mobile device. To overcome those problems, we propose method to increase DOF by iris image restoration algorithm based on focus value of iris image. When we tested our proposed algorithm with BM-ET100 made by Panasonic, we could increase operation range from 48-53cm to 46-56cm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.389-395
• /
• 2017

A study was carried out to improve the field implementation of asphalt surface reinforcement method which is a preventive maintenance. Mean Texture Depth (MTD) was measured to quantify the surface condition and used to determine the optimum application rate. Determining the application rate using MTD can reduce the material loss from 30% to 15%. In order to reduce the curing time to 30 minutes, the heat capacity of $317kcal/m^2$ is required. Therefore, the design capacity of the heating curing device requires more than 380,000 kcal/hr. The asphalt surface reinforcement method is preferably applied at a time when slight cracking occurs before the permanent deformation becomes serious. Through the analysis of the pavement survey data, it was decided to apply the surface reinforcement method at the crack rate of 3~4%. Heating the surface reinforcement agent to $50^{\circ}C$ improves workability and ensures sufficient penetration depth even at a crack width of 1 mm. The results will be utilized as basic data for the development of automated construction equipment for efficiency improvement.

• Korean Journal of Weed Science
• /
• v.7 no.3
• /
• pp.321-328
• /
• 1987

In order to examine the factors affecting herbicidal injury of pepper, crop injury and growth response of 2 red pepper cultivars and 2 sweet pepper cultivars to napropamide and pendimethalin were evaluated under defferent conditions of soil texture, organic matter, soil temperature and seeding depth in the greenhouse. Growth response of 4 pepper cultivars was also examined by roos dipping to napropamide and pendimethalin. More inhibition of top leaf growth by root dipping to napropamide was occurred in red pepper cultivars than in sweet pepper cultivars. However, sweet pepper cultivars showed more severe inhibition of top leaf growth by root dipping to pendimethalin compared to red pepper cultivars. Crop injury due to napropamide and pendimethalin was more severe in sandy soil than in loam soil and this trend was more remarkably shown in sweet pepper cultivars. Crop injury due to napropamide and pendimethalin was reduced with the increase in organic matter especially in cv. Walgeykwan and cv. Orient al Pimento. As seeding depth of pepper cultivars became deeper, crop injury due to napropamide and pendimethalin was reduced in cv. Walgyekwan and cv. Oriental Pimento.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.567-579
• /
• 2011

Scirpus planiculmis is one of the most dominant species found in the Nakdong River estuary. In order to understand the recent changes in S. planiculmis and the environmental characteristics of the estuary, from 2005 to 2010, an analysis of the density, total dry biomass, tuber biomass, and distribution pattern of S. planiculmis as well as an analysis of the temperature, salinity, precipitation, barrage discharge, and soil texture of the estuary were conducted. In 2006, the density ranged from 10.1 to $87.6no./m^2$, but in 2009, it ranged from 0.4 to $2.2no./m^2$ in 2009 and drastic reductions were observed throughout the sampled areas in the Nakdong river estuary. In 2010, S. planiculmis was observed on the tidal flats of Myungji and Mangummerydeung, at a density of $18.3{\pm}7.7no./m^2$ and $17.5{\pm}20.7no./m^2$, respectively. Hence, S. planiculmis is considered to be in a recovery phase. The aboveground/belowground ratio reduced from $4.54{\pm}0.70$ in 2005 to $1.91{\pm}0.35$ in 2009, clearly showing a large decrease in the biomass amount of the aboveground than of the belowground. Tubers were distributed in the soil, with only 36.0% at the 0~15 cm depth but 64.0% at the 15~30 cm depth. Apparently, tubers were more likely to be found at 15~30 cm below the soil in the Nakdong River estuary. A drastic reduction in the S. planiculmis biomass in 2009 is possibly due to the high salinity in S. planiculmis habitats.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.163-163
• /
• 2003

The study area, Kwangneung Experiment Forest (KEF) is located on the west-central portion of Korean peninsula and belongs to a cool-temperate broadleaved forest zone. At the old-growth deciduous forest near Soribong-peak (533.1m) in KEF, we have established a permanent plot and a flux tower, and the site was registered as a KLTER site and also a KoFlux site. In this study, we aimed to present basic ecological characteristics and synthetic data of carbon budgets and flows, and some monitoring data which are essential for providing important parameters and validation data for the forest dynamics models or biogeochemical dynamics models to predict or interpolate spatially the changes in forest ecosystem structure and function. We made a stemmap of trees in 1 ha plot and analyzed forest stand structure and physical and chemical soil characteristics, and estimated carbon budgets by forest components (tree biomass, soils, litter and so on). Dominant tree species were Quercus serrata and Carpinus laxiflora, and accompanied by Q. aliena, Carpinus cordata, and so on. As a result of a field survey of the plot, density of the trees larger than 2cm in DBH was 1,473 trees per ha, total biomass 261.2 tons/ha, and basal area 28.0 m2/ha. Parent rock type is granite gneiss. Soil type is brown forest soil (alfisols in USDA system), and the depth is from 38 to 66cm. Soil texture is loam or sandy loam, and its pH was from 4.2 to 5.0 in the surface layer, and from 4.8 to 5.2 in the subsurface layer. Seasonal changes in LAI were measured by hemispherical photography at the l.2m height, and the maximum was 3.65. And the spatial distributions of volumetric soil moisture contents and LAIs of the plot were measured. Litterfall was collected in circular littertraps (collecting area： 0.25m2) and mass loss rates and nutrient release patterns in decomposing litter were estimated using the litterbag technique employing 30cm30cm nylon bags with l.5mm mesh size. Total annual litterfall was 5,627 kg/ha/year and leaf litter accounted for 61% of the litterfall. The leaf litter quantity was highest in Quercus serrata, followed by Carpinus laxiflora and C. cordata, etc. Mass loss from decomposing leaf litter was more rapid in C. laxiflora and C. cordata than in Q. serrata litter. About 77% of C. laxiflora and 84% of C. cordata litter disappeared, while about 48% in Q. serrata litter lost over two years. The carbon pool in living tree biomass including below ground biomass was 136 tons C/ha, and 5.6 tons C/ha is stored in the litter layer, and about 92.0 tons C/ha in the soil to the 30cm in depth. Totally more than about 233.6 tons C/ha was stored in DK site. And then we have drawn a schematic diagram of carbon budgets and flows in each compartment of the KEF site.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.101-109
• /
• 2001

We created an environmental forest on the basis of ecological design around the incineration plant of Jindo Engineering and Construction Co., Ltd., which is located in Jeongwang-dong, Siheung-si, Kyunggi-do. To get ecological information of this site, physico-chemical properties of soil on salt marsh, which is located close to the syudy site and of forest soil transported from other sites for ecological restoration were analyzed. Texture of salt marsh and transported soils were loam and sandy loam, respectively. pH, organic matter, T-N, available P, and exchangeable K and Na contents of salt marsh and transported forest soils were 6.7 and 5.4, 4.1 and 0.4%, 1.0 and 0.3mg/g, 46.7 and 6.8ppm, 521 and 207ppm, and 3.8 and 0.5mg/g, respectively. Introduced plants were selected among the dominant species of forests and the species composing the potential natural vegetation around the present study site. Those plants were selected again by considering the tolerances to air pollution and to salt, and their availability. Selected trees were Pinus thunbergii, Sophora japonica, Celtis sinensis, Quercus aliena, Q. serrata, Q. dentata, and Q. acutissima. Selected sub-trees were Albizzia julibrissin, Koelreuteria poniculata, and Styrax japonica and shrubs were Rhododendron yedoense var. poukhanense, R. mucronulatum, Callicarpa japonica, Euonymus alatus, E. japonica, and R. schlippenbachii. On the other hand, introduction of herbs was not considered except for Liriope platyphylla, which was ornamentally planted in one site. Planting bed of mound type was adopted to provide the fine drainage system. Mound was designed to furnish litter, A, B, and C layers simuating the profile of forest soil. Slope of mound was mulched by rice straw of 2cm in thickness to prevent for sliding of litter and soil in cases of strong wind or heavy rain. Height of mound was designed to secure more than 1 m by combining A and B layers. Narrow zones, in which mound with stable slope degree cannot be prepared, was designed to equip the standard soil depth with the introduction of stone for supporting. On the other hand, plants with shallow root system were arranged in some zones, in which satisfactory soil depth cannot be ensured. Plants were arranged in the order of tree, sub-tree, and shrub from center to edge on the mound to make a mature forest of a dome shape in the future. Dispersion of plants was designed to be random pattern rather than clumped one. Problems on creation of the environmental forest by such ecological design were found to be management or inspection by non-specialized project operators and inspecting officers, and regulations for construction without ecological background. Alternative plans to solve such problems were suggested.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.338-338
• /
• 2017

One of the problems in increasing rice production is getting lines or varieties that have high adaptability so that able to produce maximum production in a variety of environmental conditions. One strategy that can be done to get adaptive varieties is through the improvement of native varieties. This research was conducted in rain fed paddy field, Aceh province, Indonesia from June to September 2014. The texture of the soil was clay-loam with the soil pH ranged from 6.5-6.7. Five potential progenies of rice from crossing between native Indonesian rice with introduced rice varieties consist of C3, C4, S3, S5, S6 were used in this study. Besides that, one national rice variety Ciherang also used as a comparison. The plants were growth in the plot with the size of $2m{\times}1.4m$ with plant distance was $20cm{\times}20cm$. The fertilizers used in this study were Urea, NPK, and KCl. Randomized block design with 6 rice progenies/variety and 3 replications were used in this study. There were 18 experimental units and each experimental unit had 10 samples for the sources of data. The variables that were observed in this study including plant height at harvesting time, number of productive tiller, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per hectare. Analyzed were also conducted for the depth of root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio and its correlation with the weight of filled grain per hill. The research results show that there was significant difference on plant height at harvesting time, number of productive tillers, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per ha (p>0.01) among the treatments. In addition, depth root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio also had significant difference (p>0.01) among the treatment. The highest plant at harvesting time was found in S6, reaching 129.8 cm and the shortest plants was found in C3 reaching 107.5 cm. The largest number of productive tillers and the highest percentage of filled grains per panicle were found in Ciherang reaching 10.5 tillers and 80.7% respectively. Ciherang also had the heaviest weight of filled grains per hill and per plot reaching 21.1 g and 2.18 kg respectively. Whereas, S6 had the lowest number of tillers and the lowest percentage of filled grain per panicle.. The highest yield potential per ha was found in Ciherang reaching 7.79 tons. Among the progenies, S5 had the highest yield potential reaching 5 tons/Ha. The result also showed significant relationship between shoot-root weight ratio with weight of filled grains per hill. The highest value of shoot-root weight ratio (1.57) in Ciherang is thought had closed relationship with its yield potential.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.380-390
• /
• 1994

This study was conducted to investigate the effects of the topographical factors (16 items), physico-chemical properties of soil (13 items) and meteorological factors(9 items) on the height growth of Pinus thunbergii stands along the coastal area in Korea. According to the coefficients by partial correlation analysis in total area, it was found that tree height growth was considerably affected by local topography, soil hardness, soil B-horizental depth, effective soil depth, soil moisture, parent rock, soil texture, and etc.. And the soil factors were available $P_2O_5$, total nitrogen, base saturation, exchangeable $Ca^{{+}+}$, and etc.. In partial correlation analysis, annual relative humidity, annual precipitation, index of aridity, and etc. were found to be the most important factors influencing on tree height growth of Pinus thunbergii stands. In conlusion, the topographical, soil and meteorological factors have multiplex influence on the tree height growth in the Pinus thunbergii stands. They promise to provide the basis of improving not only the selection of suitable sites and the management of soil fertilizer but also the estimation of growth and yield. Hence these results would be used successfully for the design in the scientific forest working plan.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.214-227
• /
• 1998

This study was carried out to investigate the composition and diagenesis of the carbonate rocks from the seamounts in the Federated States of Micronesia, Central Pacific. Most of the samples were dredged from the water depth of about 1000-3000 m mainly in Chuuk Island, Hunter Bank, Caroline Ridge and Yap Trench. The carbonate rocks are either pelagic sediment mainly of planktonic foraminifera or shallow-marine sediment of corals, calcareous algae, mollusks and echinoderms. The rocks are altered texturally and chemically, except for those from the Hunter Bank and Yap A. The presence of shallow-marine cements suggests that the carbonate sediment has been subsided or reworked to the present water depth after deposition in shallow-marine environments. The texture of the carbonate sediment is reminiscent of meteoric diagenesis; however, the stable carbon isotopic composition of the altered rock samples shows affinity with that of sea water and the oxygen isotopic values are slightly enriched or same as compared to those of unaltered samples. These stable isotopic data suggest that the carbonate sediment of the study area has been diagenetically altered in the present deep-marine environment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.205-208
• /
• 1987

This study was conducted to find out the optimum ranges of soil physical properties for red pepper growth by characterizing the relationship of soil physical properties and plant growth. Various environmental factors and soil physico-chemical properties and red pepper growth were investigated at 94 farmers fields in red pepper-growing area. Soil texture of the red pepper fields were mainly coarse loamy covering 72% of surveyed fields. Available soil depth, plowing layer and root zone were deeper, but bulk density and hardness of soils were lower in the area where red pepper grew well. The optimum ranges of soil three phases were identified as the solid phase below 50%, liquid phase above 10% and sir phase above 20%. The various soil physical properties were closely related with plant growth of red pepper which were highly influenced in order of available depth>bulk density>plowing layer>hardness>slope.