• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.2
• /
• pp.154-162
• /
• 2006

Cheese analogs using lipoxygenase-defected soymilk and ${\alpha}$-chymotrypsin modified soy protein isolate (SPI) were prepared. Color, textural properties, sensory attributes and melting spreadability of cheese analogs were evaluated and compared with mozzarella cheese, and relationships between textural properties, sensory attributes and melting spreadability of cheese analogs were analyzed. Off-flavors were not mostly discriminated. Cheese analogs containing 10% SPI untreated and containing 6% and 8% SPI treated by ${\alpha}$-chymotrypsin in ${\Delta}E$ value of color were the most similar to mozzarella cheese. Quality characteristics and melting spreadability of cheese analogs were highly affected and improved by ${\alpha}$-chymotrypsin modification. Sensory attributes and melting spreadability of cheese analogs containing 6% SPI treated by ${\alpha}$-chymotrypsin were the most similar to mozzarella cheese, while in textural properties, cheese analogs containing 10% SPI were the most similar with mozzarella cheese. Hardness in sensory attributes was highly positively correlated with hardness (r>0.65), adhesiveness (r>0.56), chewiness (r>0.77) and gumminess (r>0.76) in textural properties, while it was highly negatively correlated with melting spreadability (r>-0.68).

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1658-1664
• /
• 2006

The objective of this study was to investigate the effects of sodium alginate (SA) and pressurization levels on pH, water-binding and textural properties of pork muscle gels (PMG) containing salt. Ground lean pork with 1.0% NaCl and a given amount of SA (0.25, 0.5, 0.75 and 1.0%, respectively), was pressurized to 100, 200 or 300 MPa and subsequently gelled by heating. Results showed that addition of SA into pork muscle enhanced water-holding capacity (WHC) of PMG (p<0.05) as SA increased from 0.25% to 1.0%, with pH slightly increased (p>0.05). A decrease (p<0.05) was observed in all textural parameters (hardness, cohesiveness, springiness and chewiness). Pressurization had no effect on the tendency of WHC to increase or the decrease of the textural parameters. However, the effectiveness of pressurization to enhance textural properties of PMG was significant at some SA levels, especially ${\geq}200MPa$ and at ${\leq}0.75%$ SA levels. Different combinations of pressure and SA levels could bring about variation in textural properties of PMG while SA enhanced WHC of pork muscle. The multiformity of the texture will open up a wide range of technological possibilities for the manufacture of pork-based restructured low-fat products.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.10a
• /
• pp.218-222
• /
• 2004

Low-fat (< 3%)/salt(< 1%) sausages were manufactured with two levels (1, 2%) of milk proteins(whey protein and sodium caseinate) to compensate for the textural problems due to reduced fat and salt(%). The addition of two levels of milk proteins into these meat products did not affect the most physicochemical and textural properties. As compared to regular-fat counterpart, higher expressible moisture of low-fat/salt sausages were observed. In addition, low-fat/salt sausages containing more than 2% of milk proteins reduced the textural hardness and gumminess, resulting in significantly lower these values, as compared to regular-fat counterparts. These results indicated that the low-fat/salt sausages were successfully manufactured with the addition of these milk proteins at the lower than 1% to improve the textural difference, however further research will be performed to improve the water holding capacity in these products.

• Journal of Dairy Science and Biotechnology
• /
• v.36 no.2
• /
• pp.73-80
• /
• 2018

The textural and rheological properties of cheese are major attributes for the characterization of cheese types, ripening, and consumer preferences. The use of small amplitude oscillatory rheological testing has made it possible for cheese researchers to assess the major properties of cheese, such as melting behavior and storage modulus, without irreversible deformation. In addition, large deformation testing such as textural profile analysis can assess properties such as hardness of cheese. While the sensory properties of cheese are valued by consumers, objective and reliable measurements are paramount for researchers. Ongoing development and refinement of scientific measurement methods of cheese are vital.

• Journal of Animal Science and Technology
• /
• v.62 no.4
• /
• pp.577-586
• /
• 2020

This study was to investigate the effect of salt alone or in combination with phosphate on physicochemical and textural properties, and chemical interactions of low-fat model sausages. pH, color, expressible moisture (EM), cooking loss (CL), proximate analysis, textural profile analysis and low-vacuum scanning electron microscopy were performed. As salt content increased, color tended to decrease, as did EM and CL parameters, indicating that the ability to retain moisture was improved with increased salt levels (p < 0.05). In addition, textural hardness, gumminess and chewiness all increased with increasing salt (p < 0.05). Sausages with 0.3% salt showed the lowest cohesiveness compared to those with salt levels higher than 0.3% (p < 0.05). Addition of sodium tripolyphosphate (STPP) increased pH of sausages. Increasing salt and STPP did not affect lightness (p > 0.05), but did increase redness and yellowness (p < 0.05). The moisture content was higher when the salt and STPP contents were increased (p < 0.05), but no differences in the fat and protein contents (%) were observed (p > 0.05). EM and CL tended to decrease with increasing salt and STPP. In textural properties, the combination of 1.8% salt and 0.3% STPP was the best among other treatment (p < 0.05). Surface microstructure showed a flat and dense structure with increasing salt and STPP. Since the addition of salt and phosphate improved the functionality, textural and physicochemical properties of meat products in this study, meat products will need to be developed in line with consumer's preference.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.315-324
• /
• 2018

The objective of this study was to evaluate the efficacy of alkaline-treated sugarcane bagasse fiber on physicochemical and textural properties of meat emulsion with different fat levels. Crude sugarcane bagasse fiber (CSF) was treated with calcium hydroxide ($Ca(OH_2)$) to obtain alkaline-treated sugarcane bagasse fiber (ASF). The two types of sugarcane bagasse fiber (CSF and ASF) were incorporated at 2% levels in pork meat emulsions prepared with 5%, 10% and 20% fat levels. Alkaline-treatment markedly increased acid detergent fiber content (p=0.002), but significantly decreased protein, fat, ash and other carbohydrate contents. ASF exhibited significantly higher water-binding capacity, but lower oil-binding and emulsifying capacities than CSF. Meat emulsions formulated with 10% fat and 2% sugarcane bagasse fiber had equivalent cooking loss and textural properties to control meat emulsion (20% fat without sugarcane bagasse fiber). The two types of sugarcane bagasse fiber had similar impacts on proximate composition, cooking yield and texture of meat emulsion at the same fat level, respectively (p>0.05). Our results confirm that sugarcane bagasse fiber could be a functional food ingredient for improving physicochemical and textural properties of meat emulsion, at 2% addition level. Further, the altered functional properties of alkaline-treated sugarcane bagasse fiber had no impacts on physicochemical and textural properties of meat emulsions, regardless of fat level at 5%, 10% and 20%.

• Food Science of Animal Resources
• /
• v.33 no.2
• /
• pp.221-228
• /
• 2013

This study was performed to evaluate the effects of various levels of mungbean flour (MF) (0-2.4%) on the quality characteristics of pork model sausages (PMS) in experiment 1 and also select the optimum level of MF to enhance the water retention and gelling properties of low-salt PMS (LSPMS) with or without microbial transglutaminase (MTGase) in experiment 2. In experiment 1, the addition of MF did not affect pH, chemical compositions (fat and moisture contents), color values, and functional properties (expressible moisture, EM (%) and cooking yield, CY (%)) of PMS. However, the addition of MF increased the chewiness of PMS and hardness if the mungbean flour at the level of more than 1.2% was incorporated. Since the interaction between the microbial transglutaminase (MTGase) treatment and MF level was not significant (p>0.05), data were pooled by different factors (MTGase treatment and MF level) in experiment 2. MF improved the water binding ability and textural springiness of LSPMS. On the other hand, MTGase treatment decreased the pH and cooking yield (%) of LSPMS, but increased most textural properties. In conclusion, the addition of MF could enhance the water retention and textural properties of PMS and LSPMS, regardless of MTGase, when it was added to over 1.2%. Based on these results, mungbean protein may interact with MTGase on the low-salt comminuted meat systems. Therefore, further study might be needed to understand the mechanisms of interaction between MTGase and functional components induced from MF.

• Journal of the Korean Society of Food Culture
• /
• v.8 no.3
• /
• pp.289-293
• /
• 1993

This study was done to evaluate the effects of various gelling agents on textural properties of omija pyon. As a gelling agent, mungbean starch had been used in traditional omija pyon. In this experiment, gelatin and pectin were also tried for better texture. The results of this study were as follows; 1) One percent pectin addition showed desirable textural properties in both starch and gelatin jelly. 2) No significant effect on rheological values was found according to various sugar concentration(10, 15, 20%). 3) There was a saving effect of sugar concentration when adding 1% pectin to starch jelly, comparing textual properties as sensory scores.

• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.65-71
• /
• 1998

The changes in gel characteristics of soy protein as a result of various reagents that alter specific interactions which affect the formation and textural properties of gels, were studied. The reagents were added to 15% soy protein solutions prior to heat treatment. The gels were not formed with urea, indicating that hydrogen bonds significantly contributed to the formation and hardness of soy protein gel. Hydrophobic interactions and disulfide bonds compensated for hydrogen bonds and the contributions of electrostatic interactions to gel hardness are relatively insignificant. The farce primarily responsible for gel cohesiveness appeared to be disulfide bonds, because a significant decrease in cohesiveness was found only with the presence of N-ethylmaleimide. Adhesiveness decreased only with the addition of urea, and thus the contribution of hydrogen bonding to adhesiveness of gel could be concluded to be resent. However, adhesiveness was suggested to be interpreted not only wile molecular forces involved in gel formation but also with hydration properties of protein.

• Korean journal of food and cookery science
• /
• v.33 no.1
• /
• pp.28-36
• /
• 2017

Purpose: This study was conducted to understand the factors that affect the texture of gluten-free rice pasta prepared buckwheat, mung bean, and acorn starches and to compare textural properties of samples 100% semolina. Methods: The moisture content, weight and water absorption test investigated and texture profile analysis measured by texture analyzer. Results: 100% semolina sample's value was lower than gluten-free rice pasta moisture content, weight and water absorption test. moisture content weight was in pasta with mung bean starchin pasta with buckwheat starch. Texture profile analysis showed that increasing amount of buckwheat, mung bean, and acorn starches increased hardness, chewiness, cohesiveness and springiness, and decreased adhesiveness of gluten free rice pasta. Conclusion: This study suggested that adding buckwheat, mungbean and acorn starches could improve texture properties of gluten-free rice pasta.