• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.107-117
• /
• 2023

Background: Thermophysiological comfort in a cold environment is mainly ensured by clothing. However, the thermal performance and protective abilities of textile fabrics may be sensitive to extreme environmental conditions. This article evaluated the thermal insulation properties of three technical textile assemblies and determined the influence of environmental parameters (temperature, humidity, and wind speed) on their insulation capacity. Methods: Thermal insulation capacity and air permeability of the assemblies were determined experimentally. A sweating-guarded hotplate apparatus, commonly called the "skin model," based on International Organization for Standardization (ISO) 11092 standard and simulating the heat transfer from the body surface to the environment through clothing material, was adopted for the thermal resistance measurements. Results: It was found that the assemblies lost about 85% of their thermal insulation with increasing wind speed from 0 to 16 km/h. Under certain conditions, values approaching 1 clo have been measured. On the other hand, the results showed that temperature variation in the range (-40℃, 30℃), as well as humidity ratio changes (5 g/kg, 20 g/kg), had a limited influence on the thermal insulation of the studied assemblies. Conclusion: The present study showed that the most important variable impacting the thermal performance and protective abilities of textile fabrics is the wind speed, a parameter not taken into account by ISO 11092.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.402-407
• /
• 1993

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.40-41
• /
• 1994

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.57-57
• /
• 1990

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.299-304
• /
• 1993

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.271-272
• /
• 2003

Electrospinning is a novel process for forming fibers with submicron scale diameters through the action of electrical force. In the previous study, we performed study on the ultrafine PVDF nanofiber production in the stable spinning condition. Recently it would be great interest to fabricate IP(inorganic particle) assemblies in nanofibe. since such IP/nanofiber hybrid materials might be used in a nonwoven form as nanowires, medical gauges for bums healing and cell growing, sensors, chemical and gas filteration. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.122-125
• /
• 2003

Ultrasonic wave has three classes of applications such as communication, inspection, imagination and processing. In processing, ultrasonic is used web bonding for nonwovens with applications including floppy disks, medical devices and many automotive Part. The important components of ultrasonic system are power supply, converter, booster, hem, anvil roller, pressure system and hold time controller. (omitted)

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.922-927
• /
• 2015

Checks are best considered as a (visible) sub-set of grids, and each check consists of two assemblies of parallel lines, one superimposed on the other at ninety degrees. In the conventional textile context, one assembly of parallel yarns is superimposed on another at ninety degrees. These parallel lines caused by the yarns remain visually apparent in the finished composition. Commonly, checks are considered simply as a variety of woven textile and Scottish clan tartans, or plaids (common terminology for tartans in the USA), famously display a checked feature, using differently colored yarns in woven-textile form. Often the sequence of colours and the numbers of yarns used is equal in both warp and weft directions. Where this is the case, the tartan may be considered to be 'balanced' or 'regular', with the component yarns creating square units repeating across and down the fabric. Thus in balanced tartans, lengthways components have identical ordering, colouring and measured width to those used widthways. Meanwhile an unbalanced check lacks one or more of these attributes. This paper explores further the nature of Scottish clan tartans, using data collected from collections of rare tartans held at ULITA - An Archive of International Textiles at the University of Leeds.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.873-885
• /
• 2016

It is common knowledge that a conventionally woven textile consists of two assemblies of parallel threads (warp and weft), one interlaced with the other at ninety degrees. Where each of the two assemblies is arranged in a particular colour sequence, a check design, known as a 'tartan', may be created. Although similar check-type cloths have been produced worldwide, it is the tartans of Scotland which have received most attention and it is here that a complex set of rules evolved and tartans of different types became associated traditionally with different regions, family groups or 'clans'. There is an impressive array of publications focused on the identification of tartans and their clan associations. This paper explains the nature of tartans, analyses typical surface structures, ratios and proportions, and suggests possible avenues of use for modern designers. The principal sources of data were a collection of tartans held at ULITA - An Archive of International Textiles (University of Leeds, UK) and Stewart's 1974 publication The Setts of Scottish Tartans. Based on the observation that divisions into halfs and thirds were dominant, a series of templates is presented with the intention of developing an awareness among designers that ratios and proportions used in familiar or traditional frameworks can be employed in a modern context.