• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.232-239
• /
• 2013

In this study, 25gsm melt-blown polypropylene nonwoven for dust-proof/medical masks was finished by the corona discharging treatment. The influence of corona discharging parameters on the filtration efficiency was investigated. Several parameters such as discharging voltage, discharging speed, distance to discharging wire and configuration of discharging system had an effect on filtration efficiency, while the parameters had no effect on breathing resistance. Optimum corona discharging conditions are as follows: Wires were installed on the upper part of the nonwoven and paper pipe was installed on the lower part of the nonwoven having a distance of 5cm. The sequence of wire voltages was +60 kV, +60 kV, 0, -60 kV, and -60 kV. The discharging voltage and speed were 60 kV and 30m/min respectively. The nonwoven treated by corona discharging at the optimum condition showed a filtration efficiency of 80% or more, which is suitable for dust-proof/medical masks.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.51-56
• /
• 2006

Power net fabric is one of the highly extensible two-way fabrics. Power net structure shows special characteristics in the wearing of final functional clothes. This research evaluated effects of treatment temperature on proportional extensibility and shrinkage ratio of spandex at a given wale length. As treatment temperature increased, extensibility increased proportionally to the standard length of the sample and the shrinkage ratio in the direction of course and wale increased. The pulling-out length increased proportionally to the standard length of the sample. However it was affected by the effect of treatment time and temperature due to the thermal properties of spandex filament yarn.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.161-168
• /
• 2003

An investigation of the dimensionless torque in the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by the passing yarn without a special driving device. This research is composed of the theoretical analysis of the false twisting mechanism and the experimental analysis at room temperature. The equations have been derived which shows interrelationship of the conical angle of cone drum, the wrapping angle, the drag angle, and the yam helix angle. Theoretical values of dimensionless torque were calculated and were compared with the experimental results. It is shown that, as the conical angle and the projected wrapping angle increased, the dimensionless torque also increased. But the conical angle was reached to ${30.75}^{\circ}C$, the dimensionless torque decreased.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 춘계학술발표논문집 (하)
• /
• pp.1217-1220
• /
• 2001

본 논문에서는 한국인의 3D 모델을 구성하고, 개인 체형에 따라 3D 모델을 변형하여, 3D 패션코디 방법을 제안하고 있다. 한국인에 대한 다양한 체형을 표현하기 위하여, 성별, 체형별, 나이별로 세분화하여 3D 모델 36종을 구성하고 있다. 개인 체형에 대한 3D 모델을 얻기 위해 구성된 3D 모델의 높이 12 항목, 넓이 6항목, 두께 5항목, 둘레 13항목을 변형하고 있다. 나아가서, 셔츠와 치마의 의복 3D 모델의 체형변화에 따라 의복 3D 모델을 정합하고 있다.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• 마케팅과학연구
• /
• 제17권1호
• /
• pp.51-75
• /
• 2007

본 연구의 목적은 동대문시장의 패션점포와 상품 공급자와의 관계를 이해하는 것이다. 구매자-공급자 관계에 영향을 미치는 요인을 구매자-공급자 관계 요인과 공급자 속성으로 분류하고 신뢰, 몰입, 의사소통, 장기적 전망, 파워 균형, 지리적 근접성, 디자인 능력, 품질, 낮은 가격, 납기 준수의 총 10개 변수를 추출하였다. 패션점포가 어떤 요인을 더 중요하게 인식하고 있는지 그리고 점포특성에 따라 그 중요성 인식에 차이가 있는지 살펴보았으며 공급자와의 거래지속기간에 영향을 미치는 요인을 규명하였다. 동대문 패션점포 233개로부터 수집한 자료를 분석한 결과, 공급자와의 관계에서 가장 중요하다고 응답한 변수는 납기 준수였으며 그 다음이 지리적 근접성, 디자인 능력 등으로 나타나 구매자-공급자 관계 요인보다는 공급자 속성이 더 중요한 것으로 지각되고 있었다. 점포 특성에 따라 중요도 인식에 차이가 있었는데, 신흥 소매 상권의 점포들이 다른 상권 점포들에 비해 모든 변수들의 중요도를 낮게 인식하고 있었으며 도매위주 점포가 소매위주 점포보다 고매출 점포가 저매출 점포보다 모든 변수를 더 중요하게 지각하였다. 총 영업기간에 따라서는 일부 변수에서 장기 영업점포가 단기 영업점포보다 더 높은 중요도 지각을 보였다 거래지속기간에 영향을 미치는 요인을 알아보기 위해 우선 주로 거래하는 점포를 상기 10개 변수로 평가하게 하였는데, 지리적 근접성 신뢰, 디자인 능력, 품질, 의사소통 순으로 높게 평가되었다. 회귀분석 결과 실제 거래해 온 기간에 영향을 미치는 변수는 디자인 능력, 의사소톰, 파워 균형이었으며, 향후 추가로 기대하는 거래기간에 영향을 미치는 변수는 의사소통과 신뢰로 나타났다.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.147-154
• /
• 2019

In this study, poly(ethylene terephthalate)(PET) fibres dyed with Disperse Red 167 using supercritical $CO_2$ technology. The purpose of this study was to investigate relationship between PET fibers and supercritical $CO_2$ during dyeing. The effects of temperature, pressure, dyeing time and mass ratio between the dye and PET in the dyeing chamber were considered. Thermal and mechanical properties of the fibers were investigated. Tensile strength of dyed PET fibers decreased at higher temperature and pressure conditions. DSC and DMA results indicated that the Tg and Tm values decreased significantly when compared to the pure PET fibers. However, uniformly dyed PET fibers were typically observed.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.238-249
• /
• 2021

In this study, the effect on flame retardancy and various physical properties when TiO₂ was added with a citric acid/phosphate complex acid catalyst together with Pyrovatex CP new (N-methylol dimethylphosphonopropionamide), a phosphorus-based flame retardant, was studied on cotton fibers. SEM-EDS analysis was performed to confirm the surface characteristics and surface element analysis of the flame-retardant treated cotton fibers, and a vertical carbonization test was performed to confirm the char formation capability and flame retardancy according to the phosphoric acid ratio. By comparing the LOI index before and after washing 10 times, the washing durability of the flame retardant solution containing the phosphoric acid catalyst and TiO₂ was tested by LOI index after ten washing cycles. In addition, the influence of the flame-retardant processing on the physical properties were compared including thermogravimetric analysis (TGA), tear strength and whiteness.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.148-154
• /
• 2017

Many researches have been made on the processing technology of Poly(ethylene terephthalate) (PET), which is widely used for clothing and non-clothing applications. In this study, we coated PET filaments with m-aramid resin to improve heat resistance and antimicrobial properties. In order to enhance adhesion between PET and m-aramid polymer, the adhesive polymer was coated on the PET filaments using a winding speed of 100m/min and then treated with m-aramid. Scanning electron microscopy was used to analyze the surface of the adhesive polymer and m-aramid treated PET filament. The change of initial degradation temperature according to treatment was confirmed by thermogravimetric analysis. Antimicrobial activity analysis using bacterial reduction method showed that PET filament treated with adhesive polymer and m-aramid had an increased antibacterial effect compared to untreated PET filament.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.265-273
• /
• 2020

In this study, octadecyldimethyl(3-triethoxy silylpropyl)ammonium chloride (ODDMAC) incorporated with Polyethylene terephthalate (PET) fabrics with different environmental conditions such as various temperature and time intervals. First, ODDMAC (15 weight %) was dissolved in ethanol. Then PET fabrics immersed in the ODDMAC solution at 25 ℃ for 10 minutes and dried at 80 ℃ for 5 minutes. The dried PET/PDDMAC fabrics carried out for curing process out at 110 ℃ ~ 190 ℃. The treated PET/ODDMAC has examined the surface and side coating properties through SEM analysis and elemental analysis. PET/ODDMAC fabric washed with water up to 50 times and studied the durability of the materials. It was confirmed that the treated PET fabric also exhibited good water repellency. In addition, the antimicrobial activity against the gram-positive bacteria Staphylococcus aureus and gram-negative bacteria Escherichia coli were studied by the disc diffusion method on the treated fabric.