• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.103-108
• /
• 2002

The viscosity effect of matrix polymer on melt exfoliation behavior of an organoclay in poly($\varepsilon$-caprolactone) (PCL) was investigated. The viscosity of matrix polymer was controlled by changing the molecular weight of poly($\varepsilon$-eaprolactone), the processing temperature, and the rotor speed of a mini-molder. Applied shear stress facilitates the diffusion of polymer chains into the gallery of silicate layers by breaking silicate agglomerates down into smaller primary particles. When the viscosity of PCL is lower, silicate agglomerates are not perfectly broken into smaller primary particles. At higher viscosity, all of silicate agglomerates are broken down into primary particles, and finally into smaller nano-scale building blocks. It was also found that the degree of exfoliation of silicate layers is dependent upon not only the viscosity of matrix but thermodynamic variables.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.12-18
• /
• 2014

This paper describes about the development of new concept's rear wheel guards for the reduction of Road Noise in the passenger vehicle using test. The new wheel guards are proposed by various frequency chamber concept and different textile layers concept. Two wheel guards were verified by small cabin resonance test and vehicle test. Through new developing process without vehicle test, Result of road noise will be expected when new concepts and materials of wheel guard is applied into automotive vehicle. As a result of the application of Aimed Helmholtz and Multi-layers concept, this paper classifies the road noise, cost and weight are reduced by new concepts and the solutions are adopted into the 2 cars.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.474-481
• /
• 2018

For this study, we developed clothing in which textile materials that were excellent weather control function for the cold environment and we performed the human subject test with developed clothing to determine the thermal comfort. We used 2 clothing samples developed (A and B, hollow yarn+moisture absorption/quick drying yarn, 3 layers, high stretchable, heat reflection film and lamination treated) and a control sample (Ctrl.) for the human subject test and 8 adult males were used as a human subjects and environmental conditions of chamber were $0{\pm}1^{\circ}C$. $50{\pm}5%RH$, 0.3m/sec. The results were as follows: The average skin temperature and hand, thigh temperature of B were higher than B and Ctrl. (p<.05). The micro-climates of B were near to thermal comfort range which is $32{\pm}1^{\circ}C$ and $50{\pm}10%\;RH$. The chest temperature of B was significantly higher than others (p<.05). The relative humidity of B was lower than others and kept stable rather than others. The thermal sensation of B was near the "neutral" and was significantly different from Ctrl. (p<.01) and the weight loss of B was lower than Ctrl. (p<.05). The counting task and hand temperature was positively related and the counting task value of B and A is bigger than Ctrl. and that of A was bigger than Ctrl. (p<.05).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.59-64
• /
• 2019

In recent years, the HP-CRTM method, which has the ability to produce carbon fiber-reinforce plastic composites at high speeds, has come into the spotlight in the automotive parts industry, which demands high productivity. Multi-axial carbon fabric, an intermediate material used in this HP-CRTM molding process, consists of layered fibers without crimp, which makes it better in terms of tensile and shear strength than the original woven fabrics. The NCF (non-crimp fabric) can form the layers of the carbon fiber, which have different longitudinal and lateral directions, and ${\pm}{\theta}$ degrees, depending on the product's properties. In this research, preforms were made with carbon fibers of ${\pm}45^{\circ}$ and $0/90^{\circ}$, which were lamination structures under seven different conditions, in order to create the optimal laminated structure for automobile reinforcement center floor tunnels. Carbon fiber composites were created using each of the seven differently laminated preforms, and polyurethane was used as the base material. The specimens were manufactured in accordance with the ASTM D3039 standards, and the effect of the NCF lamination structure on the mechanical properties was confirmed by a tensile test.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.236-241
• /
• 2008

Hair manicure is usually and widely operated in the area of hair-dyeing by the reason that acidic hair color is less damaged and more stable than other chemical color treatment. However, there is no an in-depth study to prove them. This study purposes to provide basic resources for effectively using products of hair manicure by experiments on Physical Properties of Hair. Hair of one healthy woman in mid-20's, Level 4, was sampled for experiments. For the tests, hair samples were classified by the frequency of hair manicure treatment The control group(a), once treatment(b), twice(c), three times(d), four times(e) and five times(f). The results were measured with Scanning Electron Microscopy(SEM) and Tensile Strength and Elongation test. The lower Values of Tensile Strength according to repeated hair manicure treatment. Elongation is not affected by the frequency of hair manicure treatment. There was no remarkable change of hair surface in once(b) and twice(c) treatment. The change of hair surface which was able to judge by cuticle layers looseness, tunics and the transformation of cuticle cell were observed in the hair samples operating more than three times(d) of hair manicure treatment.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.96-100
• /
• 2005

The bleaching is one of the worst factors which leads to the damage of the human hair. The cuticle of the human hair is injured by the alkali that is one of the chief ingredients of a bleaching agent. The alkali component of the bleaching solution chemically reacts with human hair, reducing the tenacity and dissolving the cuticle layer. The purpose of this study is to examine the effects of bleaching time and temperature on the physical properties and morphology. The results were as follows. 1. The stress-strain curves for human hair indicated the three distinct regions, such as Hookean region, Yield region and post-Yield region. The tenacity of hair is reduced gradually with an increase of bleaching time. Under these same conditions, elongation of the hair increased. 2. The greatest drop in tenacity for hair occured between $40^{\circ}C$ and $60^{\circ}C$ of bleaching temperature. 3. Compared with the virgin hair, bleached hair showed a slower rate of weight reduction in the TGA thermogram. The rate decreased gradually as the bleaching time and temperature increased. 4. As the bleaching conditions reached time and temperature extremes, the human hair cuticle became more damaged. The cuticle layers seemed to have dissolved, as seen in the SEM photographs.

• Earthquakes and Structures
• /
• v.22 no.4
• /
• pp.355-372
• /
• 2022

The study is part of an experimental program on full-scale Un-Reinforced Masonry (URM) wall panels strengthened with Textile reinforced mortars (TRM). Eight brick walls (two with and five without central opening), were tested under the diagonal tension (shear) test method in order to investigate the strengthening system effectiveness on the in-plane behaviour of the walls. All the URM panels consist of the innovative components, named "Orthoblock K300 bricks" with vertical holes and a thin layer mortar. Both of them have great capacity and easy application and can be constructed much more rapidly than the traditional bricks and mortars, increasing productivity, as well as the compressive strength of the masonry walls. Several parameters pertaining to the in-plane shear behaviour of the retrofitted panels were investigated, including shear capacity, failure modes, the number of layers of the external TRM jacket, and the existence of the central opening of the wall. For both the control and retrofitted panels, the experimental shear capacity and failure mode were compared with the predictions of existing prediction models (ACI 2013, TA 2000, Triantafillou 1998, Triantafillou 2016, CNR 2018, CNR 2013, Eurocode 6, Eurocode 8, Thomoglou et al. 2020). The experimental work allowed an evaluation of the shear performance in the case of the bidirectional textile (TRM) system applied on the URM walls. The results have shown that some analytical models present a better accuracy in predicting the shear resistance of all the strengthened masonry walls with TRM systems which can be used in design guidelines for reliable predictions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.36-44
• /
• 2013

This study is focused on the debarking and xylem separation yield of Paper Mulberry. We investigated the most efficient manual on the automatic debarking and xylem separator machine. The bast tissues of Paper Mulberry were separated in three layers including black outer layer, green inner layer, and white inner layer. A target is to save the white inner layer of these three layers as much as possible. The experimental machine most characterize xylem separation and debarking by frictional force between the bulges and Paper Mulberry by the drum rotation. It is possible automatically to operate the machine by controlling the temperature sensor and the time. Debarking process can be know that removed black outer layer has beem accumulate and measured the weight. The content of the extract, holocellulose, lignin and ashes of the white inner layer was analyzed. It is result that conditions of optimum process of the experimental machine is 45 RPM, temperature at $60^{\circ}C$(60 min.) and $80^{\circ}C$(60 min.), mixing bulge of 10 mm(120ea) and 30 mm(120ea) and capacity of Paper Mulberry 10 kg.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.4 s.10
• /
• pp.87-99
• /
• 2006

This research has the purpose to examine the images sought for, makeup Consciousness, and behavioral aspects during makeup by the college girls in their 20s in the region of Daeieon and Chungnam that have strong interest in appearance and start color makeup in full scale, who form the main consumer layers in cosmetics market, and to analyze their preference on colors and feelings by the kinds of cosmetics, and their cosmetics purchase behavior. A questionnaire survey on the college girls in Daejeon and Chungnam region has shown the following results. The biggest reason college girls do the makeup was for a refined and pure image as well as protection of skin and covering defects. Their greatest concern was skin protection, and as for color selection, harmonizations of skin color and hair color were the largest consideration. In addition, the type of makeup they do most was foundation makeup, while pink was the most frequent lipstick color, and lip glow was mostly normal colors. However, they mostly answered that they do not use eye shadow, eye runner, and foundation. It was shown that their cosmetics purchase p]aces were specialized discount stores for about 47% nearly half of them, and they consider colors the most for lipsticks and eye shadows, and affinity to skin for foundations and basic cosmetics.

• Journal of the Korean Society of Costume
• /
• v.55 no.3 s.93
• /
• pp.59-68
• /
• 2005

The purpose of this study is to examine the changing process of hairstyle and the fashion trend of hairstyle in the environment where it is possible to change one's hairstyle easily arid .display oneself in various ways and the interest in hairstyle is increasing. To examine the change of real university girls' hairstyle, I selected commencement pictures of Chungnam University as material. As a method of analysis, I compared and anaylized each time period's fashion trend and the change of real university girls' hairstyle after abstracting formative element of hairstyle on the basis of preceding studies on hairstyle and measuring frequency by element of each time period. Analyzing university girls' pictures showed that many of them had curls when various perms appeared and majority of them had straight style when straight perm and magic iron appeared. When products of hairstyling were on the market and globalization changed sense of beauty, it was highly popular to set up forelock with hairstyling products. In a pluralistic social environment, desire for color aspect other than formative aspect increased. As various hairdyes were developed, hairdyeing was generalized and university girls came to accept it as natural. Fashion trend of each time period and university girls' hairstyle showed generally similar trend. In mid 1980s, curl was popular, and, in late 1980s, straight style and setting up forelock with hairstyling products were on the increase. In early 1990s, the emergence of coating perm which combined perm and hairdyeing increased hairdyeing. In late 1990s, straight style was popular and layers expressed naturalness. In early 2000s, university girls showed off their long hair in various ways and hairdyeing drastically increased.