• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.280-286
• /
• 2001

10 이하의 저유전율을 갖는 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스의 미세구조와 고주파 유전특성을 조사하였다. (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 정방정(tetragonal) 구조를 가진다. 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$세라믹스는 BaWO$_4$와 $Mg_2$SiO$_4$의 상들이 공존하는 혼합상을 보였으며, $Mg_2$SiO$_4$가 이차사으로 형성된 것이 관찰되었다. 120$0^{\circ}C$~140$0^{\circ}C$에서 2시간 동안 소결된 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 $\varepsilon$$_{r}$=6.37~8.21, Q.f=15000~99422 그리고 $ au$$_{f}$=73.9~48.9 ppm/$^{\circ}C$의 고주파 유전특성을 가졌다. $\tau$$_{f}$를 보정하기 위해, CaTiO$_3$(1,5 wt%)가 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x$\geq$0.9) 세라믹스에 첨가되었다. 135$0^{\circ}C$에서 2시간 동안 소결된 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$+CaTiO$_3$(5 wt%) 세라믹스는 $\varepsilon$$_{r}$=7.3, Q.f=30532 그리고 $\tau$$_{f}$=-30 ppm/$^{\circ}C$의 고주파 유전특성을 얻었다. 얻었다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1353-1354
• /
• 2006

The dielectric properties of $Ba_{0.5}Sr_{0.5}TiO_3$(BST) and MgO-doped BST ceramics were investigated for tunable microwave applications by sol-gel method. The effects of MgO mixing with BST. It is observed that Mg substitution into BST causes a shift in the cubic-tetragonal BST Phase transition peak to a lower temperature. MgO-substituted BST and MgO-mixed phases exhibit homogeneous and broadened BST phase transition peaks. Mg substitution into BST has a significant effect on the grain sife reduction. Dielectric constant and loss is inhanced with decrease MgO dopant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.4
• /
• pp.160-165
• /
• 2015

Lead-free piezoelectric materials have been actively studied to substitute for conventional PZT based solid solution, $Pb(Zr_xTi_{1-x}O_3)$, which occurs unavoidable PbO during the sintering process. Among them, Bismuth Sodium Titanate, $Na_{0.5}Bi_{0.5}TiO_3$ (abbreviated as NBT) based solid solution is attracted for the one of excellent candidates which shows the strong ferroelectricity, Curie temperature (Tc), remnant polarization (Pr) and coercive field (Ec). Especially, the solid solution of rhombohedral phase NBT with tetragonal perovskite phase has a rhombohedral - tetragonal morphotropic phase boundary. Modified NBT with tetragonal perovskite at the region of MPB can be applied for high frequency ultrasonic application because of not only its low permittivity, high electrocoupling factor and high mechanical strength, but also effective piezoelectric activity by poling. In this study, solid state ceramic processing of NBT and modified NBT, $(Na_{0.5}Bi_{0.5})_{0.93}Ba_{0.7}TiO_3$ (abbreviated as NBT-7BT), at the region of MPB using 7 % $BaTiO_3$ as a tetragonal perovskite was introduced and the structure between NBT and NBT-7BT were analyzed using rietveld refinement. Also, the ferroelectric and piezoelectric properties of NBT-7BT such as permittivity, piezoelectric constant, polarization hysteresis and strain hysteresis loop were compared with those of pure NBT.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.4
• /
• pp.136-142
• /
• 2022

The crystal structure, grain growth behavior, and dielectric properties of BaTiO₃ have been studied with the addition of Dy₂O₃. The powders were synthesized at ratios of (100-x)BaTiO₃-xDy₂O₃ (mol%, x = 0, 0.5, 1.0, 2.0) by a conventional solid-state synthesis, and the powder compacts were sintered at 1250℃ for 2 hours in air. As the amount of added Dy₂O₃ was increased, the crystal structure of the sintered samples changed from a tetragonal to a pseudo-cubic structure, and the tetragonality decreased. In addition, a secondary phase of Ba₁₂Dy_4.67Ti₈O₃₅ appeared when Dy₂O₃ was added. The average grain size after sintering decreased and abnormal grains appeared as the amount of Dy₂O₃ increased. It can be explained that the grain growth behavior of the Dy₂O₃ added-BaTiO₃ occurs due to the two-dimensional nucleation and growth, and is governed by the interface reaction. Further, the correlation between crystal structure, microstructure, and dielectric properties was discussed.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.12
• /
• pp.1180-1184
• /
• 1995

The precursors of Ba1-xSrxTiO3(x=0.0-0.3) were prepared by the rapid addition of aqueous solution of titanyl oxalate to the mixed aqueous solution of barium and strontium at room temperature. The optimum pH was theoretically calculated from the equilibrium constants and solubility products. The chemical formula of the precursors obtained corresponded to Ba1-xSrxTiO(C2O4)2·4H2O(x=0.0-0.3) as determined by thermal gravimetric analysis. The precursors were converted to stoichiometric Ba1-xSrxTiO3(x=0.0-0.3) with a particle size of 0.01-0.04 μm. As increasing the amount of strontium substituted to barium sites, the structure of crystal changed from the tetragonal phase to the cubic and the unit cell volume was decreased.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.56-64
• /
• 1996

A large amount of papers about the cubic-to-tetragonal phase transition the ferroelectric domain structures of the BaTiO3 were already reported but there exist still some needs to observe the domain behaviors directly. In this study the domain structures of the tinned plates prepared from ta single crystal grown by the TSSG technique were observed using a polarizing microscope TE and X-ray topography. The spatial relation be-tween the orientation states of domains was investigated and the effects of external stresses and electric fields on the behaviors of ferroelectric and ferroelastic domains were studied. All the 90$^{\circ}$walls cut off in the crystal are the wedge shaped lamellar domains and all the straight boundaries in the observed domain patte군 can be interpreted as the head-to-tail 90$^{\circ}$walls. The irregular overlapped boundaries commonly observed by using a polarizing microscope and X-ray topography are complex combinations of well-known 90$^{\circ}$walls and are domain walls were predominant and were stabilized after surface polishing. In the paraelectric phase region the domain walls vanished but the residual surface strain patterns could be seen at the same positions of the stabilized 90$^{\circ}$a-a walls in the tetragonal phase region, These stabilized walls resulted from the surface strain had a memory effect in domain formation during the repeated phase transitions and could notr be affected by an external electtric field.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.48.2-48
• /
• 2003

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.172-172
• /
• 2009

$BaTiO_3$는 perovskite 구조를 가지는 대표적인 강유전체 재료로서 MLCC(Multi Layer Ceramic Capacitor), PTC thermistor등에 널리 사용되어지고 있다. 최근 고용량 MLCC 의 상업화와 함께 나노크기를 갖는 tetragonal phase의 $BaTiO_3$ 입자를 합성하기 위한 다양한 제조방법이 제시되고 있다. 또한 유전 특성과 온도특성 및 신뢰성을 향상시키기 위해 많은 첨가제들이 연구되어지고 있다. 따라서 이 번 연구에서는 선행 연구를 통해 얻어진 high energy mill을 이용한 고상반응법으로 제조된 $BaTiO_3$를 사용하였으며, 제조된 $BaTiO_3$ 분말에 glass frit를 첨가하여 소결온도 및 유전특성의 변화를 관찰하였다. 제조된 $BaTiO_3$ 분말은 200nm이하의 구형화와 균일한 입자크기를 보였으며, 선행연구를 통해 최적화된 glass frit의 양인 2.53wt%를 첨가하였고 1170, 1200, $1230^{\circ}C$에서 소결하여 소결온도에 따른 변화를 관찰하였다. 실험방법으로는 원료를 혼합하기 위하여 24시간 ball-mill을 이용하여 혼합하였으며, $\Phi15$로 성형하여 소결을 진행하였다. 실험진행 결과 모든 시편에서의 비유전율은 glass frit가 첨가되지 않은 조성보다 높게 나타났으며, $1200^{\circ}C$에서 소결한 시편의 비유전율($\varepsilon_r$)은 2300으로 glass frit가 첨가되지 않은 조성과 비교하여 21% 증가하여 최대치를 나타냈다. 또한 소결온도 $1200^{\circ}C$ 이상에서의 모든 시편에서는 95% 이상의 상대밀도를 나타내어, glass frit가 소결조제로써의 역할을 하는 것으로 나타났다. 따라서 본 연구를 통해 glass frit첨가로 인한 소결온도 감소 및 유전특성이 증가하는 것을 확인 하였다.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.517-524
• /
• 2005

Barium titanate ($BaTiO_3$) particles were prepared by spray pyrolysis from spray solution containing organic additives. The effects of the type and amount of organic precursors on the crystal structure and morphology of the $BaTiO_3$ particles were investigated. It was found that the morphology of $BaTiO_3$ particles before and after calcination depended on the type of organic additives such as citric acid, ethylene glycol and polyethylene glycol. Among these organic additives, citric acid was the most effective to prepare $BaTiO_3$ particles with nano-structured morphology consisting with uniform size nanometer particles after calcination. It was also found that the phase transformability of the metastable cubic phase to the tetragonal one during calcination could be improved by increasing the content of citric acid in the spray solution. As a result, $BaTiO_3$ particles prepared from spray solution containing high concentration of citric acid had good tetragonality, uniform and fine size, and high BET surface area after calcination. $BaTiO_3$ particles prepared by spray pyrolysis had nanometer size and uniform morphology after simple ball milling process.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.173-179
• /
• 2004

The $BaTiO_3$ powders and thin films were prepared by an alkoxide modified sol-gel process (polymerization-complex route) using ethylene glycol. The stable starting (Ba-Ti)-mixed metal organic sol was made by addition of acetylacetone. The $BaTiO_3$ powders, which had a particle size of 40~77 nm, were crystallized from an amorphous to a tetragonal phase on annealing at 700 and $1100^{\circ}C$ for 1 h. From FT-IR, solid-state $^{13}C$ CP/MAS NMR spectroscopy and X-ray diffractometry, the trace of the Ba-Ti-oxycarbonate phase first appeared at $400^{\circ}C$. Hydrolyzed sol was spin coated on a quartz wafer at 3500 rpm for 60 s and pyrolyzed at $1100^{\circ}C$ for 1 h. After heat treatment, the coated layer became dense and smooth.