• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1095-1102
• /
• 2016

본 논문에서는 20 kg급 틸트-덕트 수직이착륙 비행로봇 개발을 위한 비행체의 설계, 제작 및 시험 결과를 제시한다. 틸트-덕트 비행체는 추력발생을 위한 두 개의 메인프롭과 피치축 자세 제어를 위한 후방프롭으로 구성된다. 비행체의 추력과 자세 안정성 향상을 위해 호버와 조종성 연구에 중점을 두었다. 비행체 조종 성능 개선을 위해 메인프롭 링키지 변경에 의한 롤축 안정성 영향, 작동기 변경에 따른 자세제어 성능, 외풍에 대한 덕트 유, 무상태의 영향 및 조종면 영향을 확인할 수 있는 안전줄 시험이 수행되었다.

• 신재생에너지
• /
• 제7권2호
• /
• pp.36-42
• /
• 2011

The wind speed at the altitude around 300 m is much higher and less variable than at the altitude around 80 m which is the same height of the MW class tower turbine's hub height. The wind power density is increased 0.37 W/$m^2$ per meter at the altitude around 6 to 7 km and 0.25 W/$m^2$ per meter at the altitude around 80 to 500 m. There are two types of power generation systems using lifting bodies. The one is that The generator is installed in the ground station and stretched into the lifting body through the tether. The other is that the generator is installed in the lifting body and stretched into the ground station through the tether. Many kinds of lifting bodies are also researched in the world, called kites, wings, single or twin aerostat, and so on. This article introduced the technical development status and the market prospects of the high altitude wind power generation system all over the world in detail.

• 천문학회보
• /
• 제39권2호
• /
• pp.97.1-97.1
• /
• 2014

We clarify the dynamics connecting a solar flare and a coronal mass ejection (CME) based on the results of a magnetohydrodynamic (MHD) simulation starting from a nonlinear force-free field (NLFFF) in Inoue et al. 2014. In previous studies, many authors proposed numerous candidates for triggering processes of a solar flare and the associated CME. Among them, the tether-cutting reconnection or the torus instability has been supported by recent simulations and observations. On the other hand, our MHD simulation in accordance with more realistic situations show that highly twisted field lines are first produced through a tether-cutting reconnection between the twisted field lines in the NLFFF, and then the newly formed, strongly twisted field erupts away from the solar surface because of a loss of equilibrium. This dynamics corresponds to the onset of a solar flare. Furthermore we have found that the strongly twisted erupting field reconnect with the weakly twisted ambient field during the eruption, creating a large flux tube, and then it rises over a critical height of the torus instability to trigger a CME. From these results, we conclude that the coupled process of tether-cutting reconnection and torus instability is important in the flare-CME relationship.

• International Journal of Ocean System Engineering
• /
• 제4권1호
• /
• pp.19-28
• /
• 2014

The tension leg platform (TLP) is a vertically moored structure with excess buoyancy. The TLP is regarded as moored structure in horizontal plan, while inherit stiffness of fixed platform in vertical plane. In this paper, a numerical study using modified Morison equation was carried out in the time domain to investigate the influence of nonlinearities due to hydrodynamic forces and the coupling effect between surge, sway, heave, roll, pitch and yaw degrees of freedom on the dynamic behavior of TLP's. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables and the nonlinear equations of motion were solved utilizing Newmark's beta integration scheme. The effect of tethers length and wave characteristics such as wave period and wave height on the response of TLP's was evaluated. Only uni-directional waves in the surge direction was considered in the analysis. It was found that for short wave periods (i.e. 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on tether length, wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations about that is significantly dependent on tether length.

• Ocean Systems Engineering
• /
• 제8권3호
• /
• pp.345-360
• /
• 2018

Increasing demand for large-sized Floating, Storage and Regasification Units (FSRUs) for oil and gas industries led to the development of novel geometric form of Buoyant Leg Storage and Regasification Platform (BLSRP). Six buoyant legs support the deck and are placed symmetric with respect to wave direction. Circular deck is connected to buoyant legs using hinged joints, which restrain transfer of rotation from the legs to deck and vice-versa. Buoyant legs are connected to seabed using taut-moored system with high initial pretension, enabling rigid body motion in vertical plane. Encountered environmental loads induce dynamic tether tension variations, which in turn affect stability of the platform. Postulated failure cases, created by placing eccentric loads at different locations resulted in dynamic tether tension variation; chaotic nature of tension variation is also observed in few cases. A detailed numerical analysis is carried out for BLSRP using Mathieu equation of stability. Increase in the magnitude of eccentric load and its position influences fatigue life of tethers significantly. Fatigue life decreases with the increase in the amplitude of tension variation in tethers. Very low fatigue life of tethers under Mathieu instability proves the severity of instability.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.259-264
• /
• 2002

인장계류된 원통형실린더의 동적 거동해석에 관한 일련의 연구수행 결과는 다음과 같다. 1) 실린더형 부유체의 중심점을 인장계류시킨 새로운 개념의 부유식 구조물의 동적거동특성을 파악하였다. 2) 규칙파에서도 부유체와 테더(tether), 입사파의 상호간섭으로 인한 운동특성을 해석하였다. 3) 비선형유체력(2w, 3w)으로 인한 비선형 운동 응답 특성을 분석하였다. 4) 테더강성(tether stiffness)의 결정에 있어서 부유체와의 상호간섭 효과 뿐만 아니라 고주파수 영역에서의 공진을 충분히 고려하여 결정해야 한다. 5) 구조물의 설계시 Surge mode에서는 장주기 표류운동을 발생시키므로 Set down 등의 현상을 고려해야 한다.

• Molecules and Cells
• /
• 제45권1호
• /
• pp.26-32
• /
• 2022

Living cells generate, sense, and respond to mechanical forces through their interaction with neighboring cells or extracellular matrix, thereby regulating diverse cellular processes such as growth, motility, differentiation, and immune responses. Dysregulation of mechanosensitive signaling pathways is found associated with the development and progression of various diseases such as cancer. Yet, little is known about the mechanisms behind mechano-regulation, largely due to the limited availability of tools to study it at the molecular level. The recent development of molecular tension probes allows measurement of cellular forces exerted by single ligand-receptor interaction, which has helped in revealing the hitherto unknown mechanistic details of various mechanosensitive processes in living cells. Here, we provide an introductory overview of two methods based on molecular tension probes, tension gauge tether (TGT), and molecular tension fluorescence microscopy (MTFM). TGT utilizes the irreversible rupture of double-stranded DNA tether upon application of force in the piconewton (pN) range, whereas MTFM utilizes the reversible extension of molecular springs such as polymer or single-stranded DNA hairpin under applied pN forces. Specifically, the underlying principle of how molecular tension probes measure cell-generated mechanical forces and their applications to mechanosensitive biological processes are described.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1841-1842
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제17권5호
• /
• pp.409-412
• /
• 1996

• 한국해양공학회지
• /
• 제8권1호
• /
• pp.50-61
• /
• 1994

A 300 meter class ROV(CROV300) is composed of three parts : a surface unit, a tether cable and an underwater vehicle. The vehicle controller is based on two processors : an Intel 8097-16-bit one chip micro-processor and a Texas Instruments TMS320E25 digital signal processor. In this paper, the surface controller, the vehicle controller and peripheral devices interfaced with the processors are described. These controllers transmit/receive measured status data and control commands through RS422 serial communication. Depth, heading, trimming, camera tilting, and leakage signals are acquired through the embedded AD converters of the 8097. On the other hand, altitude of ROV and lbstacle avoidance signals are processed by the DSP processor and periodically fetched by the 8097. The processor is interfaced with a 4-channel 12-bit D/A converter to generate control signals for DC motors an dseveral transistors to handle the relays for on/off switching of external devices.