• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.238-243
• /
• 1998

Measurement technique using only one sensor for complex modal testing of the asymmetric rotor is proposed. The reverse directional frequency response function of asymmetric rotor, which is known to be indicative of the degree of asymmetry in a symmetric rotor, is also shown to be identified with simplest technique requiring only one sensor and one excitor. It lessens the testing efforts and its practicality is verified by numerical simulation. The measurement and excitation techniques for complex modal testing are also summarized so that the efficient complex modal testing can be possible according to the kind of rotor system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.271-281
• /
• 2010

Brazing fitting which is one of the aircraft hydraulic power system components is widely used for saving weight and achieving higher reliability. Any inherent defects or damage of fitting can cause system failure and/or physical damage of human body due to highly pressurized fluid. Radiographic testing(RT) technique and additional micro-structure investigation on cut-away surfaces have been accomplished to find out some defect-like-inhomogeneity in the fittings. The radiography results showed that some defect-like-inhomogeneity existed inside body. Additional micro-structure investigation on cut-away surface reveals that the inhomogeneity is due to internal voids. In this study, it can be is said that RT technique can be a useful tool for field acceptance test of hydraulic brazing fitting in short time.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.691-698
• /
• 2001

Component-based development methods are regarded as one of the most important tools for us to cope with ever-increasing software complexity and, at the same time, to improve productivity in software development. This paper presents how to generate test-cases for integrated software from those of member components and how to validate composition of components, by the analysis of domain relations of components. This paper shows the applicability of the proposed technique by the real experiment. This study is based on the dataflow systems architecture and process components, and the technique developed here is an application of domain testing technique.

• Journal of KIISE:Software and Applications
• /
• v.31 no.6
• /
• pp.741-749
• /
• 2004

Component users must customize components they obtain from providers, in order to fit them to their own purposes. Normally, a component consists of black-box parts and white-box parts. Component users customize a component by modifying white-box parts of a component, and the customization faults appear through the interaction between black-box parts and white-box parts. Customization testing could be an integration testing of these two parts of a component. Also, customization testing in CBSD should select effective test data to reduce the testing cost, since CBSD aims to reduce the development cost. Therefore, this paper proposes a customization testing technique based on COM architecture through analyzing many COM components, and the technique selects effective test data. This paper evaluates the effectiveness of the test data selected by the proposed technique through an empirical study. It applies the techlique to a large-scale component-based system, Chamois, and it shows that the technique enables us to test customized COM components that run in a real component-based system

• Journal of the Korean Society for Nondestructive Testing
• /
• v.1 no.1
• /
• pp.6-12
• /
• 1981

Sizing of artificial flaws is accomplished by ultrasonic Satellite- Pulse Technigue(SPT). Negligible error is found.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.785-792
• /
• 2008

In spite of the various techniques on the testing of embedded software, operation failures of embedded systems such as robot or satellite applications, are occurred frequently. The critical reason of these failures is due to the fact that software is embedded into a target system with inherent faults. Therefore, in order to prevent the failure owing to such faults, it needs a technique to test the embedded software which operates in real environment. In this paper, we propose a testing technique, aspect-based On-the-Fly testing that is to test the functionality and performance at real operation time. Our proposed technique gives some benefits of real test of unexpected input conditions, prevention of software malfunction, and reusability of aspect components for the testing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.388-393
• /
• 2013

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.715-724
• /
• 1999

The purpose of this study was to approve the possibility of clinical application of selftesting technique to confirm the cleanness status of the tooth surface after mechanical toothbrushing. Thirty-two periodontal patients who did not compromise any other systemic diseases were divided into two groups. Control group was instructed only the Bass method for toothbrushing, and then experimental group was demonstrated the Bass method and self-testing technique respectively for plaque control during this experiment. Selftesting technique is composed the comparison of roughness of the labial surface of maxillary central incisor and other toothsurface with touch sense using the tip of tongue. Plaque score and Gingival index were measured as clinical parameters at baseline and 1, 2 and 4 weeks after scaling and root planing. The results were as follows ; 1. Plaque scores and gingival index of 1, 2, and 4 weeks of two groups were statistically significant differences when compared with baseline value (p<0.05). 2. Plaque scores and gingival index of baseline and 1 week between two groups were not significant differences (p<0.05). 3. Plaque scores and gingival index of 2 and 4 weeks of test group were statistically significant difference when compared with control group (p<0.05). From the above results, self-testing technique which decides necessity of additional toothbrushing when tongue tip of subjects touch the maxillary molar buccal surfaces and mandibular molar lingual surfaces nd compares with maxillary anterior labial surfaces after toothbrushing appeared to effect the motivation of subjects. This study suggests that self-testing technique for cleanness after toothbrushing should be effect on the maintenance of oral hygiene when it is applied to clinical practice.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.6
• /
• pp.609-620
• /
• 2002

It is well known that during tensile testing, a part of the mechanical work done on the specimen is transformed into heat energy. However, the ultimate temperature rise and the rate of temperature rise is related to the nature of the material, conditions of the test and also to the deformation behaviour of the material during loading. The recent advances in infrared sensors and image/data processing techniques enable observation and quantitative analysis of the heat energy dissipated during such tensile tests. In this study, infrared imaging technique has been used to characterise the tensile deformation in AISI type 316 nuclear grade stainless steel. Apart from identifying the different stages during tensile deformation, the technique provided an accurate full-field temperature image by which the point and time of strain localization could be identified. The technique makes it possible to visualise the region of deformation and failure and also predict the exact region of fracture in advance. The effect of thermal gradients on plastic flow in the case of interrupted straining revealed that the interruption of strain and restraining at a lower strain rate not only delays the growth of the temperature gradient, but the temperature rise per unit strain decreases. The technique is a potential NDE tool that can be used for on-line detection of thermal gradients developed during extrusion and metal forming process which can be used for ensuring uniform distribution of plastic strain.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.11-18
• /
• 2016

Due to open source policy, Android systems are exposed to a variety of security problems. In particular, app reuse attacks are detrimental threat to the Android system security. This is because attacker can create core malign components and quickly generate a bunch of malicious apps by reusing these components. Hence, it is very imperative to discern whether Android apps contain reused components. To meet this need, we propose an Android app reuse analysis technique based on the Sequential Hypothesis Testing. This technique quickly makes a decision with a few number of samples whether a set of Android apps is made through app reuse. We performed experimental study with 6 malicious app groups, 1 google and 1 third-party app group such that each group consists of 100 Android apps. Experimental results demonstrate that our proposed analysis technique efficiently judges Android app groups with reused components.