• 한국지반환경공학회 논문집
• /
• 제14권7호
• /
• pp.51-56
• /
• 2013

최근, 시강우량의 최대치의 기록이 매년 바뀌고 있으며 이로 인해 도로의 침수피해 사례가 증가하고 있다. 이러한 이유로 새로운 배수포장체가 개발되고 있으나 보조기층에 대해서는 별도의 고려가 없다. 본 연구에서는 보조기층의 강도와 투수성을 함께 고려한 적정입도분포 기준을 제안하며, 이때 실내실험을 통해 각각의 강도특성 및 투수성을 비교하고자 한다. 실험에 앞서 국내외 보조기층 기준에 대한 시방기준을 토대로 4가지의 대표적인 입도분포를 산정하고 이를 실험하였다. 실험에 있어서 강도특성은 회복탄성계수 산정을 비교하고, 투수특성은 수직방향의 상향 및 하향 투수계수를 비교하였다. 회복탄성계수 산정은 $M_R$ 시험을 통하였으며, 이때 본 연구에서는 진동삼축시험기기를 보완하여 이를 구현하도록 하였다. 투수시험의 경우에는 2가지 투수시험이 수행되었으며, 하향의 흐름에 대한 투수시험으로는 기존의 변수위 투수시험이 적용되었고, 상향의 경우 직경 150mm의 중형 Rowe Cell 투수시험기를 이용하여 시험을 수행하였다. 연구결과, 회복탄성계수와 투수계수의 결과들을 종합하여 포장체 보조기층의 강도특성과 투수특성을 모두 만족할 수 있는 적정입도분포를 선정하고, 이를 통해 적정입도기준 마련이 가능할 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.131-141
• /
• 2004

지반기술자는 지반의 구조 및 잠재적 거동을 예측하기 위해서 현장조사 데이터를 사용한다. 대부분의 경우 이러한 데이터들은 전체 지반 체적의 1/100,000도 되지 못한다. 이렇게 얻어진 시료에 대한 실내시험 및 현장시험을 통하여 지반의 특성치를 결정한다. 그러나 이렇게 추정된 결과치는 예측치이며 Legget(1979)의 지적과 같이 실제 흙의 상태와는 매우 다르게 평가될 가능성을 가지고 있으며, 이러한 경우는 샘플링과 예측 과정을 일반적인 규정에 따라 실시하는 경우에도 발생할 수 있다. 그동안 지반 물성치와 관련된 불확실성을 규명하고자 하는 노력이 이루어졌지만, 전체 지반 조사 계획의 정확도 및 각각의 지반 조사 위치나 잠재적 조사 위치의 상대적인 중요성을 정량적으로 평가할 수 있는 방법으로 일반적으로 받아들여지는 방법이 아직까지는 없는 실정이다. 본 논문에서는 지구 통계학적 방법인 크리깅 내삽법(kriging interpolation method) 및 역거리 내삽범(inverse distance weighted interpolation method)을 이용하여 지반 정수를 추정하고 그 정확도를 비교하였다. 또한 장기 침하량을 예측할 수 있는 새로운 방법을 제시하였다. 그리고 이 방법을 "신뢰도"(Tsai and frost, 1999)와 지구 통계학적 방법을 접목시켜서 지반 조사 계획의 조사정밀도를 평가하는 공간적 인 분석 방법을 제시하였다. 그리고 마지막으로 추가 지반조사 계획이 이루어지는 경우, 추가 지반조사위치를 결정할 수 있는 방법을 제시하였다. 아울러, 보다 정확한 해석을 위한 방법으로 시각적 도시, 해석 및 자료 관리의 기능이 뛰어난 GIS 프로그램(ARC-lnf3)을 이용하였다.

• 한국컴퓨터정보학회논문지
• /
• 제10권1호
• /
• pp.15-26
• /
• 2005

XP(Extreme Programming)는 경량소프트웨어개발방법론 중의 하나로서 의사소통, 단순함, 피드백, 용기의 네 가지 가치추구를 통해 소프트웨어의 생산성과 품질을 향상시키는 실질적인 소프트웨어개발방법론이다. 그러나 XP의 핵심실천사항 중 하나인 테스트주도개발(Test Driven Development)은 한 가지 문제점을 가지고 있다. 테스트수행시간이 오래 걸리거나 테스트케이스(Test Cases)의 독립성을 확보하지 못할 경우 테스트주도개발이 불가능하다는 문제로서 최근 이를 해결하기 위해 모크객체(Mock Objects)의 중요성이 강조되고 있다. 모크객체는 문제가 되는 실제코드를 흥내내는 객체로서 수동으로 작성할 수있을 만큼 간단함을 원칙으로 하지만, 모크객체를 수동으로 작성하는 것은 실제로는 비효율적인 작업이기때문에 자바에서는 Mockobjects, EasyMock와 같은 모크객체생성기를 사용하고 있다. 그러나 모크객체는 객체지향을 전제로 하고, C언어용 모크객체생성기도 없기 때문에 C언어에서는 모크객체를 적용하기가 곤란하다. 본 논문에서는 객체지향개념이 취약한 C언어에서 모크객체를 손쉽게 생성하기 위한 C언어용모크객체생성기 CMock를 제시하고 이의 효용성을 검증하는 연구를 수행하였다.

• Restorative Dentistry and Endodontics
• /
• 제24권3호
• /
• pp.473-481
• /
• 1999

This study evaluated the shear bond properties of IPS Empress glass ceramic to enamel and dentin surfaces with three ceramic surface treatments, and three resin cements. The influence of thermocycling was also investigated. The purpose of this study was to investigate the influences of resin cements, ceramic surface treatments, and thermocycling on shear bond properties. Ninety freshly extracted, noncarious human molars were selected for this study. The surface treatments of ceramic were etching <5.0% hydrofluoric acid, application of silane coupling agents(Tokuso Ceramic Primer, Clearfil porcelain bond, Monobond-S), and the combination of the two methods. Empress cylinders were bonded to enamel and dentin surfaces with three kinds of resin cements(Bistite resin cement, Panavia 21, Variolink). The specimens were aged in $37^{\circ}C$ distilled water for 24 hours. Half of the specimens were then thermocycled 500times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 15 seconds. Each specimen was debonded in shear mode and measured shear bond properties by using the universal testing machine(Zwick 020, Germany). The data were analyzed by SPSS/PC+(one-way ANOVA, Scheffe' s test and t-test). The results were as follows : 1. Without thermocyling, there was significant difference of shear bond strength to enamel surface between Bistite Resin Cement and Panavia 21 in case of etched and silane-treatment(p<0.05). 2. Without thermocyling, the shear bond strength of a group treated with silane and etching was significantly higher than that of a group treated with silane or etching with the application of Panavia 21 and Variolink(p<0.05). 3. A group treated with etching with the application of Variolink only showed a decrease of shear bond strength after thermocycling(p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제24권3호
• /
• pp.465-472
• /
• 1999

The aim of this study was to determine the shear bond properties of four dentin bonding systems to internal cervical dentin, and to investigate the effect of the pretreatment for removing smear layer and position of dentin on shear bond strength of dentin bonding agents. The materials tested in this study were consisted of four commercially available dentin bonding systems[Allbond 2(AB), Clearfil Linerbond 2(CL), Optibond FL(OP), Scotchbond Multi-purpose(SB)], a restorative light-cured composite resin[Z100]J and a chelating agent[RC-prep(RC)]. Fifty-six freshly extracted human molars were used in this study. Dentin specimens were prepared by first cutting the root of the tooth 1mm below the cementoenamel junction with a diamond bur in a high speed handpiece under air-water coolant, and then removing occlusal part at pulp horn level by means of a second parallel section, The root canal areas were exposed by means of cutting the dent in specimens perpendicular to the root axis. Dentin specimens were randomly assigned to two groups(pretreated group, not-pretreated group) based on the pretreatment method of dentin surface. In pretreated group, RC was applied to dentin surface for 1minute and then rinsed with NaOCl. In not-pretreated group, dentin surface was rinsed with saline Each groups were subdevided into four groups according to dentin bonding systems. Four dentin bonding systems and a restorative resin were applied according to the directions of manufacturer. The dentin-resin specimens were embedded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of $1{\times}1mm$. The cut specimens were divided into three groups according to the position of internal cervical dentin. The shear bond properties of dentin-resin specimens were measured with Universal testing machine (Zwick, 020, Germany) with the cross head speed of 0.5mm/min. From this experiment. the following results were obtained : 1. In case of shear bond strength, there was no significant difference among dentin bonding systems in not-pretreated groups, whereas in pretreated groups, the shear bond strengths of AB and of SB were statistically significantly higher than those of CL and of OP. 2. The shear bond strengths of AB and of SB in pretreated groups were significantly higher than those in not-pretreated groups. 3. The shear bond strengths of radicular layer of OP were higher than those of occlusal layer of OP in not-pretreated groups, and of AB in pretreated groups. The shear bond strengths of radicular layer of AB and of CL in not-pretreated groups were higher than those in pretreated group.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권2호
• /
• pp.227-232
• /
• 2016

To test the effectiveness of using an energy storage system for frequency regulation, the Energy New Business Laboratory at KEPCO Research Institute installed a 4 MW energy storage system (ESS) demonstration facility at the Jocheon Substation on Jeju Island. And after the successful completion of demonstration operations, a total of 52 MW ESS for frequency regulation was installed in Seo-Anseong (28 MW, governor-free control) and in Shin-Yongin (24 MW, automatic generation control). The control system used in these two sites was based on the control system developed for the 4 MW ESS demonstration facility. KEPCO recently finished the construction of 184 MW ESS for frequency regulation in 8 locations, (e.g. Shin-Gimjae substation, Shin-Gaeryong substation, etc.) and they are currently being tested for automatic operation. KEPCO plans to construct additional ESS facilities (up to a total of about 500 MW for frequency regulation by 2017), thus, various operational tests would first have to be conducted. The high-speed characteristic of ESS can negatively impact the power system in case the 500 MW ESS is not properly operated. At this stage we need to verify how effectively the 500 MW ESS can regulate frequency. In this paper, the effect of using ESS for frequency regulation on the power system of Korea was studied. Simulations were conducted to determine the effect of using a 524 MW ESS for frequency regulation. Models of the power grid and the ESS were developed to verify the performance of the operation system and its control system. When a high capacity power plant is tripped, a 24 MW ESS supplies power automatically and 4 units of 125MW ESS supply power manually. This study only focuses on transient state analysis. It was verified that 500 MW ESS can regulate system frequency faster and more effectively than conventional power plants. Also, it was verified that time-delayed high speed operations of multiple ESS facilities do not negatively impact power system operations. It is recommended that further testing be conducted for a fleet of multiple ESSs with different capacities distributed over multiple substations (e.g. 16, 24, 28, and 48 MW ESS distributed across 20 substations) because each ESS measures frequency individually. The operation of one ESS facility will differ from the other ESSs within the fleet, and may negatively impact the performance of the others. The following are also recommended: (a) studies wherein all ESSs should be operated in automatic mode; (b) studies on the improvement of individual ESS control; and (c) studies on the reapportionment of all ESS energies within the fleet.

• 대한치과기공학회지
• /
• 제37권3호
• /
• pp.121-127
• /
• 2015

Purpose: This study was intended to investigate the effect of applying liner for chemical bonding and physical surface roughness created on zirconia by using a sandpaper before sintering on the bond strength between the two materials. Methods: Zirconia blocks were cut using a low-speed cutter. Plate-shaped specimen($6mm{\times}6mm{\times}3mm$) was fabricated by sintering after giving surface roughness according to four kinds of sandpapers. Depending on whether or not to use liner, 60 specimens were divided into two groups ZN(non-liner), ZL(liner), and the two groups were subdivided into four groups respectively in accordance with sandpaper used, totaling eight groups (n=10). The surface roughness (Ra) values and shapes before sintering were observed, and shear bond strength after pressing ceramic plasticity was measured with a universal testing machine. For a test of the significance, a one-way ANOVA was performed, and Tukey's multiple comparison test was conducted. Results: The observation of the surface roughness was SB04($2.22{\pm}1.16{\mu}m$), SB08($2.98{\pm}0.33{\mu}m$), SB12($2.44{\pm}1.32{\mu}m$), SB20($2.34{\pm}0.59{\mu}m$) and SA04($2.34{\pm}0.67{\mu}m$), SA08($1.28{\pm}0.90{\mu}m$), SA12($2.03{\pm}1.60{\mu}m$), SA20($2.19{\pm}1.73{\mu}m$). In the case of ZN Group, the shear bond strength was ZN04($23.26{\pm}3.83MPa$), ZN08($21.76{\pm}2.33MPa$), ZN12($20.49{\pm}3.01MPa$), ZN20($24.98{\pm}4.22MPa$)(p<0.05). As for ZL Group, the shear bond strength was ZL04($25.09{\pm}5.67MPa$), ZL08($22.98{\pm}2.26MPa$), ZL12($21.54{\pm}5.70MPa$), ZL20($23.98{\pm}3.23MPa$)(p<0.05). Conclusion: The research results showed that the bond strength of Zirconia core and Pressing ceramic was further improved by physical surface treatment before sintering, rather than by chemical bonding through liner surface treatment.

• Imaging Science in Dentistry
• /
• 제39권3호
• /
• pp.149-156
• /
• 2009

Purpose : The purpose of this study was to develop a stent-based image guided surgery system and to apply it to oral and maxillofacial surgeries for anatomically complex sites. Materials and Methods : We devised a patient-specific stent for patient-to-image registration and navigation. Three-dimensional positions of the reference probe and the tool probe were tracked by an optical camera system and the relative position of the handpiece drill tip to the reference probe was monitored continuously on the monitor of a PC. Using 8 landmarks for measuring accuracy, the spatial discrepancy between CT image coordinate and physical coordinate was calculated for testing the normality. Results : The accuracy over 8 anatomical landmarks showed an overall mean of $0.56{\pm}0.16\;mm$. The developed system was applied to a surgery for a vertical alveolar bone augmentation in right mandibular posterior area and possible interior alveolar nerve injury case of an impacted third molar. The developed system provided continuous monitoring of invisible anatomical structures during operation and 3D information for operation sites. The clinical challenge showed sufficient accuracy and availability of anatomically complex operation sites. Conclusion : The developed system showed sufficient accuracy and availability in oral and maxillofacial surgeries for anatomically complex sites.

• 한국조리학회지
• /
• 제19권3호
• /
• pp.87-104
• /
• 2013

본 연구는 특급호텔 뷔페레스토랑 주방 조직의 서비스지향성이 종업원의 직무만족과 조직성과에 미치는 영향관계를 실증적으로 검증하여 주방종사자의 효과적인 관리에 대한 시사점을 제공하고자 하였다. 이를 위해 조직의 서비스지향성(서비스리더십, 서비스시스템, 인적자원관리, 서비스 접점)과 종업원의 직무만족 및 영업장의 조직성과에 대한 개념과 이론적 배경을 중심으로 각각의 구성개념에 대한 요인을 도출하여 영향관계를 분석하였다. 분석결과, 서비스지향성의 서비스리더십과 서비스시스템이 종업원의 직무만족에 미치나 영업장의 조직성과에는 직접적이지 않고, 대신 인적자원관리가 조직성과에 직접적이라고 할 수 있다. 또한 종업원의 만족이 조직성과에 직접적인 관계에 있기 때문에 서비스지향성을 향상시키면서 종업원의 직무만족을 향상시키기 위해서는 서비스리더십과 서비스시스템이 우선되어야 한다고 할 수 있다. 그리고 서비스지향성을 향상시키면서 직접적인 레스토랑의 조직성과를 도출하기 위해서는 인적자원관리에 의한 서비스훈련과 서비스보상이 효과적이라고 할 수 있다. 본 연구 결과는 조직의 서비스 지향성이 서비스기업의 우수한 고객가치를 창조하는 요소로 인식되고 있는 가운데, 서비스지향성의 관리적 방향성을 제안하였다는데 의의가 있다.

• 생물정신의학
• /
• 제3권1호
• /
• pp.57-65
• /
• 1996

The Evaluation of patients complaining of psychiatric symptoms following head injury is much affected by the results of various tests. The objecive of this paper is to investigate the effectiveness of each lest by comparing the structual and fuctional brain studies. The subjects were 93 organic menial disorder in and out patients at the Dept. of Neuropsychiatry of the Kyung Hee University Hospital. After carrying out MRI, CT, SPECT, EEG, the results of each were analysed for the sesitivity and ability to detect focal lesion. The degree of inter-test correlations of lest results were also investigated. Furthermore, the characteristic features of psychological tests were studied and the relationship between each of above mentioned tests and psychological test was examined. As for the test sensitivity to diagnosis, the SPECT was the most superior followed by MRI, CT, EEG in thai order. In the case of abnormality, SPECT ranked 1st in detection of focal lesion, followed by MRI, CT in that order. In the inter-test result correlation, the correlation of SPECT-MRI was statistically significant. When mare than moderate abnormality EEG finding was reported, it correlated significantly with that of MRI findings. In the MMPI, the average scores on F, Hs, D, Hy, Pa, Pt, Sc subscales were above 60. Abnormal SPECT group scored significantly high on the F, Pd, Pa, Sc, Ma scales and therefore in comparison ot the SPECT normal group, displayed more psychotic features. In K-WAIS, the mean full scale IQ was down to 77. 23(Verbal IQ : 78.76, Performance IQ : 77.44) but there was no characterogic significant relationship between the lowered to and abnormal SPECT, MRI, CT and EEG results. In conclusion, 1) The SPECT was mast superior in sensitivity and detection of focal lesions. In comparision with other tests, the results of SPECT correlated well with MRI had thus is thought to be very usefull testing method in the evaluation of organic mental disorder patients. 2) The MRI had relatively high sensitivity, ability to detect focal lesion and superior correlation with other test. 3) Although EEG fared less an sensitivity in comparison to other tests, the results of above moderate abnormal grade group and that of MRI correlated significantly. 4) In the MMPI highly scored in F, Hs, D, Hy, Pa, Pt, Sc subscales and abnormal SPECT patients were shown to display more sever psychotic features. There was no significant character relationship between the lowered IQ(in K-WAIS) and abnormal findings on MRI, CT, SPECT, EEG.