• Archives of Plastic Surgery
• /
• 제34권3호
• /
• pp.377-382
• /
• 2007

Purpose: Hook nail deformity is caused by inadequately supported nail bed due to loss of distal phalanx or lack of soft tissue, resulting in a claw-like nail form. A composite graft from the foot bencath the nail bed gives adequate restoration of tip pulp. Methods: From September of 1999 to March of 2004, six patients were treated for hook nail deformity and monitored for long term follow up. Donor sites were the lateral side of the big toe or instep area of the foot. We examined cosmetic appearance and nail hooking and sensory test. The curved nail was measured by the picture of before and after surgery. Results: In all cases, composite grafts were well taken, and hook nail deformities were corrected. The curved nail of the 4 patients after surgery were improved to average $28.7^{\circ}$ from average $55.2^{\circ}$ before surgery. The static two point discrimination average was 6.5mm and the moving two point discrimination average was 5.8mm in the sensory test. Conclusion: Composite graft taken from foot supports the nail bed with the tissue closely resembling the fingertip tissue, making it possible for anatomical and histological rebuilding of fingertip.

• 터널과지하공간
• /
• 제17권2호
• /
• pp.102-108
• /
• 2007

일반적으로 암판정을 수행하기 인해 가장 널리 사용되는 방법은 암석의 강도와 절리의 발달빈도를 고려하는 것이다. 하지만 미세균열과 연장성이 긴 절리들이 암반에 존재하고 있는 경우에는 이러한 방법이 합리적이지 않다. 그러므로 복잡한 지질조건을 가지고 있는 암반에서의 굴착난이도 결정은 절리빈도와 실내시험(일축압축강도, 점하중강도, 실내탄성파속도 등)과 현장탄성파속도와의 상관관계를 종합하여 암판정을 수행하는 것이 더욱 더 합리적이라고 판단된다.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.32-45
• /
• 1979

The major objective of this study was to develope a computer simulation model to analyze drying process in a deep bed with natural air. The approach used to describe the continuous drying process in a deep bed was to divide the process into many small processes and simulate them by consecutively calculating the changes of grain and air conditions that occurred during short increment of time. Success criterion of the drying system was based on grain deterioration estimated by drymatter decomposition during drying. The results of the experimental test showed that the model satisfactory.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.325-335
• /
• 2010

A new geothermal energy source obtained from a tunnel structure has been studied in this paper. The geothermal energy is extracted through a textile-type ground heat exchanger named "Energy Textile" that is installed between a shotcrete layer and a guided drainage geotexitle. A test bed was constructed in an abandoned railway tunnel to verify the geothermal heat exchanger system performed by the energy textile. To evaluate the applicability of the energy textile, we measured the thermal conductivity of shotcrete and lining samples which were prepared in accordance with a common mixture design. An overall performance of the energy textile installed in the test bed was evaluated by carrying out a series of in-situ thermal response test. In addition, a 3-D finite volume analysis (FLUENT) was adopted to simulate the operation of the ground heat exchanger being encased in the energy textile with the consideration of the effect of the shotcrete and lining thermal conductivity.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.259-270
• /
• 1998

An automatic seedling transplanter, employed an innovative plug-seedling feeder was developed by improving the problems of conversational feeding and transplanting mechanisms. With conventional methods, missing and damage rates of seedling were high for long seedlings over 20cm and also breaking seed-bed was frequently observed. Thus, a pushout-bucket slide-hopper type trandsplanter was devised and tested. Test results of picking and transferring accuracies of the developed transplanter are as follows : A prototype transplanter performed with 1.5% of missing rate. The deviations of horizontal feed ranged from -0.3mm to 2.8mm and averaged 0.673mm for the 128-hoe test tray : and ranged from -lmm to ＋3mm and averaged 0.785mm for the 200-hole test tray. The deviations could decrease with precise manufacturing and lightening the mechanism. The maximum and deviations of vertical feed were -2.3mm and + 1mm, respectively, for the 128-hole test tray ; and were ＋3mm and ＋2.5mm, respectively, for the 200-hole test tray. The missing rate, seeding bruise rate and seed-bed damage rate were esitmate to be 1.3％, 0.4% and 3.5％, respectively, with the developed automatic transplanter.

• Nuclear Engineering and Technology
• /
• 제50권4호
• /
• pp.570-581
• /
• 2018

Recently, a software program has been used in nuclear power plants (NPPs) to digitalize many instrumentation and control systems. To guarantee NPP safety, the reliability of the software used in safetycritical instrumentation and control systems must be quantified and verified with proper test cases and test environment. In this study, a software testing method using a simulation-based software test bed is proposed. The test bed is developed by emulating the microprocessor architecture of the programmable logic controller used in NPP safety-critical applications and capturing its behavior at each machine instruction. The effectiveness of the proposed method is demonstrated via a case study. To represent the possible states of software input and the internal variables that contribute to generating a dedicated safety signal, the software test cases are developed in consideration of the digital characteristics of the target system and the plant dynamics. The method provides a practical way to conduct exhaustive software testing, which can prove the software to be error free and minimize the uncertainty in software reliability quantification. Compared with existing testing methods, it can effectively reduce the software testing effort by emulating the programmable logic controller behavior at the machine level.

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.141-150
• /
• 2013

시뮬레이션은 애드혹 네트워크 프로토콜 검증에 유용한 기법이지만 네트워킹 및 통신 환경에 대한 가정과 간소화로 인하여 실제 환경에서도 제안된 프로토콜이 요구 성능을 획득할 수 있는지 보여주기 어렵다. 따라서, 애드혹 네트워크가 현실적으로 획득할 수 있는 성능에 대한 이해를 위해서는 실제 시험 환경을 이용한 실험이 필요하며 이를 위해서는 많은 시스템 구성요소의 상호 작용을 이해하여야 한다. 본 논문에서는 건물 안에서 고속 영상 데이터 전송을 위한 실제 애드혹 네트워크 테스트베드를 구현하여 실제 네트워크 성능을 측정한다. AODV-UU를 이용하여 구축된 멀티홉 애드혹 네트워크는 Throughput, PDR, 종단간 지연 측면에서 저용량 영상데이터 전송을 위하여 요구되는 성능을 제공할 수 있음을 보인다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.92-92
• /
• 2010

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3187-3190
• /
• 2007

Elastin-Like polypeptide (ELP) composed of elastin-based repeating units is an artificial biomaterial which is biocompatible and non-immunogenic. ELP shows a characteristic inverse phase transition between hydrophobic and hydrophilic phase by external stimuli such as salt, pH and temperature. In this study, ELP coated PS (polystyrene) beads are packed in tubing and the thermo -responsive flow characteristics of the packed bed are investigated. Preliminary test results show that the control of the fluid flow can be achieved by using the temperature driven phase transition effect of the ELP coated beads in a microchannel.

• 재활복지공학회논문지
• /
• 제3권1호
• /
• pp.35-40
• /
• 2009

전동 조절식 의료용 침대나 수술대는 병원에서 환자의 요양시 또는 진료시 자세유지에 사용되는 유용한 기기이지만, 다양한 기능과 복잡한 기구 메커니즘으로 인해 사용상의 안전사고가 빈번하게 발생하는 의료기기의 하나이다. 본 논문에서는 의료기기로서 승인이 필요한 의료용 침대와 수술대의 안전성과 성능에 관한 일반 요구사항 및 시험방법을 제시한다. 각 항목은 관련 국제규격을 바탕으로 구성한다. 연구의 결과는 식품의약품안전청의 의료기기 인허가시 적용되는 기준규격의 개발에 사용될 수 있다.