• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.131.1-131.1
• /
• 2011

We present applications of clustering methods to detect variability in massive astronomical time series data. Focusing on variability of bright stars, we use clustering methods to separate possible variable sources from other time series data, which include intrinsically non-variable sources and data with common systematic patterns. We already finished the analysis of the Northern Sky Variability Survey data, which include about 16 million light curves, and present candidate variable sources with their association to other data at different wavelengths. We also apply our clustering method to the light curves of bright objects in the SuperWASP Data Release 1. For the analysis of the SuperWASP data, we exploit a elastically configurable Cloud computing environments that the KISTI Supercomputing Center is deploying. Two quite different configurations are incorporated in our Cloud computing test bed. One system uses the Hadoop distributed processing with its distributed file system, using distributed processing with data locality condition. Another one adopts the Condor and the Lustre network file system. We present test results, considering performance of processing a large number of light curves, and finding clusters of variable and non-variable objects.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.2
• /
• pp.239-247
• /
• 2003

Purpose: The purpose of this study is to examine how well patients who had hip arthroplasty comply with medical regimens given to them after the operation. Method: The subjects of the study were patients who had arthroplasty at P Hospital between April 1, 2001 and August 30, 2002. 20 patients of the subjects experienced complications after the operation and the other 20 did not. Data from a survey using the qustionnaire were statistically analyzed in terms of real number, percentage point, mean and standard deviation by using $X^2$-test, t-test and ANOVA. Result: 1) the surveyed patients were significantly different in the compliance of medical regimen among them according to their education background as one of the subjects general characteristics. 2) It was found that the group of complication was higher in the compliance of medical regimen than that of non-complication. The two groups showed statistically significant difference with each other in the degree of compliance with therapeutic instructions than the experimental group in terms of the maintenance of abduction after the operation, training instructions on step-by-step basis, urination cotrol on bed, accurate use of crutch, compliance with medication, balance among medical treatment, training, leisure, rest and nutrition, instructions by physicians, nurses and physical therapists, use of low armchairs and toilet bowels and no bending of the body forward, and use of a non-operated leg in case of go upstairs or downstairs. Conclusion: It seems necessary to develop systematic and sessional education programs for improving the compliance of medical regimen, ultimately reducing complications following hip arthroplasty.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.3
• /
• pp.137-147
• /
• 2022

This study investigated the seismic performance of reinforced concrete (RC) wall-slab frames with masonry infills. Four RC wall-slab frames with or without masonry infill were tested under cyclic loading. The RC frames were composed of in-plane and out-of-plane walls and top and bottom slabs. For masonry infill walls, cement bricks were stacked applying mortar paste only at the bed joints, and, at the top, a gap of 50 mm was intentionally left between the masonry wall and top RC slab. Both sides of the masonry walls were finished by applying ordinary or fiber-reinforced mortars. The tests showed that despite the gap on top of the masonry walls, the strength and stiffness of the infilled frames were significantly increased and were different depending on the direction of loading and the finishing mortars. During repeated loading, the masonry walls underwent horizontal and diagonal cracking and corner crushing/spalling, showing a rocking mode inside the RC wall-slab frame. Interestingly, this rocking mode delayed loss of strength, and as a result, the ductility of the infilled frames increased to the same level as the bare frame. The interaction of masonry infill and adjacent RC walls, depending on the direction of loading, was further investigated based on test observations.

• Pediatric Infection and Vaccine
• /
• v.24 no.1
• /
• pp.65-70
• /
• 2017

Cytomegalovirus (CMV) infection is one of the most common congenital infections. The first case of discordant congenital CMV infection in twins occurred in Korea. A 31-year-old woman became pregnant with twins (dichorionic-diamniotic). An elective caesarean section was performed at 37 weeks. The first baby was male, weighing 2,410 g with an Apgar score of 8/9. The second baby was female, weighing 1,380 g with an Apgar score of 5/8. She had experienced intrauterine growth retardation, and presented with microcephaly, micrognathia, and joint stiffness. During the work-up for discordant twins, the second baby's serum test was positive for CMV immunoglobulin M. Her urine, blood, and cerebrospinal fluid (CSF) were CMV polymerase chain reaction positive. The first baby's CMV tests were negative. Ophthalmologic exam and audiometry performed on the second baby showed CMV retinitis and bilateral sensorineural hearing loss. She was treated with intravenous ganciclovir. Currently, she is bed-ridden and has significant developmental delay. Although the causes of discordant congenital CMV infection in twins are unclear, this case shows that discordant congenital CMV infection should be considered in twins with significant differences in intrauterine growth or clinical symptoms after birth.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.126-135
• /
• 2020

Recently, with the development of the 4th Industrial Revolution era and the popularization of technologies the maker movement is spreading worldwide in various ways for education, entrepreneurship, and solving social problems. This paper introduces a case of establishing and operating a maker space in Tanzania, East Africa, one of the developing countries. iTEC Tech-shop was established in the first half of 2018 at the Nelson Mandela African Institution of Science and Technology (NM-AIST) in Arusha, Tanzania by Innovative Technology and Energy Center (iTEC), and has been operating for nearly two years. With the allocation of empty warehouse space from NM-AIST, physical facilities were established through the purchase and installation of equipment and hand tools. Based on the advice from Idea Factory of Seoul National University and Fab-Lab Seoul, iTEC Tech-shop operational system were established. Through a total of 7 technical workshops, iTEC Tech-shop provided training courses for about 180 local personnel. In addition, the smart Techshop test-bed project was promoted in order to improve the operation level along with securing sustainability of the Techshop. The case of the iTEC Tech-shop could be a useful case for institutions or organizations promoting the maker movement to developing countries.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.289-298
• /
• 2014

Recently, the traditional paradigm in railroad technology is changing as more efficient and cost-effective electric vehicle (EV) technologies have emerged. The original concept of PRT (Personal Rapid Transit) proposed in the past has come to be regarded as unrealistic, but its feasibility is improving through the utilization of an EV platform. In particular, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. However, based on the inductive power transfer (IPT) technology, the fast charging of supercapacitors with high energy density can contribute to overcoming this technical challenge and promote the transition to electric-powered ground transportation by improving the appearance of cities. This study discusses the development process of a power supply system for PRT, including concept design, numerical analysis, and device manufacturing, along with performance predictions and evaluations. In terms of results, the system was found to meet the performance requirements for power supply modules on a test-bed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.67-70
• /
• 2013

Purpose: Surge in patients with hepatocellular carcinoma, hepatic artery chemical embolization is one of the effective interventional procedures. The PET/CT examination plays an important role in determining the presence of residual cancer cells and metastasis, and prognosis after embolization. The other hand, the hepatic artery chemical embolization of embolic material used lipiodol produced artifacts in the PET/CT examination, and these artifacts results in quantitative evaluation influence. This study, the radioactivity density and the percentage error was evaluated by the extent of the impact of lipiodol in the image of PET/CT. Materials and Methods: 1994 NEMA Phantom was acquired for 2 minutes and 30 seconds per bed after the Teflon, water and lipiodol filled, and these three inserts into the enough to mix the rest behind radioactive injection with $20{\pm}10MBq$. Phantom reconfigure with the iterative reconstruction method the number of iterations for two times by law, a subset of 20 errors. We set up region of interest at each area of the Teflon, water, lipiodol, insert artifact occurs between regions, and background and it was calculated and compared by the radioactivity density(kBq/ml) and the% Difference. Results: Radioactivity density of the each region of interest area with the teflon, water, lipiodol, insert artifact occurs between regions, background activity was $0.09{\pm}0.04$, $0.40{\pm}0.17$, $1.55{\pm}0.75$, $2.5{\pm}1.09$, $2.65{\pm}1.16 kBq/ml$ (P <0.05) and it was statistically significant results. Percentage error of lipiodol in each area was 118%, compared to the water compared with the background activity 52%, compared with a teflon was 180% of the difference. Conclusion: We found that the error due to under the influence of the attenuation correction when PET/CT scans after lipiodol injection performed, and the radioactivity density is higher than compared to other implants, lower than background. Applying the nonattenuation correction images, and after hepatic artery chemical embolization who underwent PET/CT imaging so that the test should be take the consideration to the extent of the impact of lipiodol be.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.117-124
• /
• 2010

Most of the rivers which exist in nature are not a single river but the network that is composed of several branches and mainstreams. The river network are more complicated than other sigle rivers and streams. Therefore the hydraulic characteristics are sensitively changed by reduction and expansion of the width in the confluence or the variation of the flux. In this paper, the hydraulic characteristics were calculated by the change of the width and length in the confluence and the hydraulic model test. The deposit of confluence emerged at the left bank, right bank and the stagnation sector. As the total flow in the branch have increased, stagnation of the left bank and right bank have decreased. When the width of the downstream have been get smaller from 3 m to 2 m, the deposit of the left bank and right bank and stagnation sector have decreased. But as the eddy flow in the center of the confluence is occurred, the erosion has been increased. The result of this paper can be used as a basic data of water management around the junction and for maintenance on the ground of development of the river.

• Korea Journal of Hospital Management
• /
• v.25 no.2
• /
• pp.45-56
• /
• 2020

Purpose: The purpose of this study is to investigate medical care behaviors influencing accuracy of the payment based New diagnosis-related groups (DRG) compared to fee for service (FFS) in hospitalized patients with medical illness. Methodology: In order to estimate the difference in medical costs between New DRG and FFS depending on medical care behaviors, medical records and hospital claims data (n=4,232) were utilized, which were collected from a single public hospital during the first-half of 2018. Data were analyzed by descriptive statistics, t-test, chi-square test, and multivariate binary logistic regression. Findings: The average difference in medical costs between New DRG and FFS were KRW 506,711±13,945 with incentives and KRW -51,506±12,979 without incentives, respectively. Forty-four point two percent (44.2%, n=1,872) of total subjects were shown to have negative compensation in overall medical costs with New DRG compared to the costs with FFS. Medical care behaviors that affected on the negative compensation were the presence of severe bed sores on admission, medical consultations, death, operations, medications and laboratory or imaging tests with unit price over KRW 100,000, hospital-acquired complications or underlying comorbidities, elderly patients (≧65 years), and hospitalized for more than average inpatient days defined by New DRG (p<0.001). The difference in average medical cost between New DRG and FFS for a group with mild illness was KRW -11,900±10,544, whereas it was KRW -196,800±46,364 for a group with severe illness (p<0.0001). Practical Implications: These findings suggest that New DRG payment model without incentives may incompletely cover the variation of medical costs in real clinical practice. Therefore, policy makers need to consider that the current New DRG reimbursement should be focused and refined to improve accuracy of payment on medical care resources utilized in severe and complex medical conditions.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.8-14
• /
• 2023

This study was conducted to develop a precision automatic irrigation system in a nursery by considering the problems and improvements of manual and the conventional automatic irrigation system. The amount of irrigated water between the conventional automatic irrigation system and manual irrigation was 28.7 ± 4.4 g and 14.2 ± 4.3 g, respectively, and the coefficient of variation was less than 30%. However, the coefficient of variation of the conventional automatic irrigation system of 15%, was higher than that of manual irrigation of 30%. The irrigation test using the developed uniform irrigation system attached with the nozzle of a spray angle 80° and most highest uniformity was at height 600 mm. And coefficient of variation of the irrigation uniformity at the center part was within 20%, but irrigation amount of the edge part was lower 50% and over compared to the center part. As a result of a tomato grafting seedling cultivation test using the developed uniform irrigation system, the average plant height of seedling at the edge part was 28 mm but plant height at the center part was higher as 72 mm. Therefore, it was necessary to apply additional irrigation device at the edge part. The irrigation uniformity of the edge concentrated irrigation system was investigated that the irrigation amount of the edge part was irrigated by more than 50% compared with the center part, and coefficient of variation of the irrigation amount at the center part was less than 30%. As a result of a cucumber grafting seedling cultivation test using the edge concentrated irrigation system, the plant height of seedlings in the edge and central part of cultivation bed were 24% and 26%, respectively, so irrigation uniformity was higher then the uniform irrigation system. In order to improve the uniformity of seedlings, it is necessary to adjust the height of boom according to the growth of the seedling by installing a distance sensor in the overhead watering and boom irrigation system.