• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.2
• /
• pp.35-44
• /
• 2002

The translation and the rotation of camera occur global motion which affects all over the frame in video sequence. With the video sequences containing global motion, it is practically impossible to extract exact video objects and to calculate genuine object motions. Therefore, high compression ratio cannot be achieved due to the large motion vectors. This problem can be solved when the global motion compensated frames are used. The existing camera motion estimation methods for global motion compensation have a large amount of computations in common. In this paper, we propose a simple global motion estimation algorithm that consists of linear equations without any repetition. The algorithm uses information .of symmetric points in the frame of the video sequence. The discriminant conditions to distinguish regions belonging to distant view from foreground in the frame are presented. Only for the distant view satisfying the discriminant conditions, the linear equations for the panning, tilting, and zooming parameters are applied. From the experimental results using the MPEG test sequences, we can confirm that the proposed algorithm estimates correct global motion parameters. Moreover the real-time capability of the proposed technique can be applicable to many MPEG-4 and MPEG-7 related areas.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• Korean journal of applied entomology
• /
• v.14 no.2 s.23
• /
• pp.71-76
• /
• 1975

The study has been carried to find a proper site for seed potato production in Jeon Bug Province, Korea. Two fields, one at the alpine area (700-800 m sea level) in Muju county and the other at the plain area in Jeoniu, were chose for this study. Seed potatoes for the experiment were obtained from Alpine Experiment Station and from the traditional sources in Muju area. During the growing season the virus infection (Potato virus X,S,Y, and M) was detected by serolgical method. The average percent of virus infection on the original seed potatoes, which have been used as a seed source in Korea, was $50.5\%$, and the ratio of the infection for each of potato virus, Y, M and X was 34..87, 40.33, 41.00 and $87.10\%$, respectively. Infection percentage of virus at first year in Muju area was $11.7\%$ and those in Jeonju area was $18.95\%$. In case of potato virus Y, the most prevalent virus in Korea, lower Infection percentage $(6.45\%)$ was found in Muju area than in tile Jeonju area $(26.0\%)$ when the seed from Alpine Experiment Station was planted in both areas. The percentage of infected seed potato, Alpine Experiment Station$(41.75\%)$ was almost the same as those from the traditional sources in Muju $(42.17\%)$. The production of seed potato, however, was much better by the seeds from Alpine Experiment Station.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.82-90
• /
• 2011

Because of the development of Smart phone devices, the demands of high performance FPU(Floating-point Unit) becomes increasing. Therefore, we propose the high-speed single-/double-precision FPU design that includes an elementary add/sub unit and improved multiplier and compare and convert units. The most commonly used add/sub unit is optimized by the parallel rounding unit. The matrix operation is used in complex calculation something like a graphic calculation. We designed the Multiply-Add Fused(MAF) instead of multiplier to calculate the matrix more quickly. The branch instruction that is decided by the compare operation is very frequently used in various programs. We bypassed the result of the compare operation before all the pipeline processes ended to decrease the total execution time. And we included additional convert operations that are added in IEEE754-2008 standard. To verify our RTL designs, we chose four hundred thousand test vectors by weighted random method and simulated each unit. The FPU that was synthesized by Samsung's 45-nm low-power process satisfied the 600-MHz operation frequency. And we confirm a reduction in area by comparing the improved FPU with the existing FPU.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2087-2093
• /
• 2012

Previous evidence showed ${\beta}1$, 3-N-acetylglucosaminyltransferase 8 (${\beta}3GnT8$), which can extend polylactosamine on N-glycans, to be highly expressed in some cancer cell lines and tissues, indicating roles in tumorigenesis. However, so far, the function of ${\beta}3GnT8$ in laryngeal carcinoma has not been characterized. To test any contribution, Hep-2 cells were stably transfected with sense or interference vectors to establish cell lines that overexpressed or were deficient in ${\beta}3GnT8$. Here we showed that cell proliferation was increased in ${\beta}3GnT8$ overexpressed cells but decreased in ${\beta}3GnT8$ knockdown cells using MTT. Furthermore, we demonstrated that change in ${\beta}3GnT8$ expression had significant effects on tumor growth in nude mice.We further provided data suggesting that overexpression of ${\beta}3GnT8$ enhanced the expression of matrix metalloproteinase-2 (MMP-2) and matrix metalloproteinase-9 (MMP-9) at both the mRNA and protein levels, associated with shedding of tissue inhibitors of metalloproteinase TIMP-2. In addition, it caused increased production of transforming growth factor beta 1 (TGF-${\beta}1$), whereas ${\beta}3GnT8$ gene knockdown caused the reverse effect. The results may indicate a novel mechanism by which effects of ${\beta}3GnT8$ in regulating cellular proliferation are mediated, at least in partvia targeting MMPs/TIMPs and TGF-${\beta}1$ in laryngeal carcinoma Hep-2 cells. The finding may lay a foundation for further investigations into the ${\beta}3GnT8$ as a potential target for therapy of laryngeal carcinoma.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.27-40
• /
• 1998

This paper addresses the suitability of GPS positioning technology to monitoring deformation and movement of structures. The first part of the study is an empirical quantitative study of the repeatability of GPS observations and the second part is a performance evaluation of kinematic GPS, which requires only a few minutes per a point, for monitoring deformation of an engineering structure. On the test network for monitoring of a earth am, four observations have been conducted repeatedly on different seasons and water levels. The reference network was observed in static mode, and monitoring points were observed respectively in rapid-static mode as well as in kinematic mode in each epoch and then the results were compared with those obtained by conventional surveying techniques. The repeatability of baseline vectors to better than average 7 mm in three dimensions was achieved in base line observations between reference points and also the unclosure of reference networks showed the range of 4 ppm to 27 ppm. Compared with conventional surveying techniques, the kinematic approach showed the differences of 3∼4 m in slope distances which were observed from reference points to monitoring points, and showed the differences of 4∼8 m in height. It was ascertained that the kinematic GPS technology provides an efficient alternative to deformation monitoring by conventional means which are capable of detecting movements in the order of 5 mm.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.28-41
• /
• 2017

In this paper, the fast encoding algorithm in High Efficiency Video Coding (HEVC) encoder was studied. For the encoding efficiency, the current HEVC reference software is divided the input image into Coding Tree Unit (CTU). then, it should be re-divided into CU up to maximum depth in form of quad-tree for RDO (Rate-Distortion Optimization) in encoding precess. But, it is one of the reason why complexity is high in the encoding precess. In this paper, to reduce the high complexity in the encoding process, it proposed the method by determining the maximum depth of the CU using a hierarchical clustering at the pre-processing. The hierarchical clustering results represented an average combination of motion vectors (MV) on neighboring blocks. Experimental results showed that the proposed method could achieve an average of 16% time saving with minimal BD-rate loss at 1080p video resolution. When combined the previous fast algorithm, the proposed method could achieve an average 45.13% time saving with 1.84% BD-rate loss.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.48-56
• /
• 2002

The flow characteristics around KRISO 3600TEU container ship model have been experimentally investigated in a circulating water channel. The instantaneous velocity vectors were measured using 2-frame PIV measurement system. The mean velocity fields and turbulent statistics including turbulent kinetic energy and vorticity were obtained by ensemble-averaging 400 instantaneous velocity fields. The free stream velocity was fixed at 0.6m/s and the corresponding Reynolds number was $9{\times}10^5$. The test sections were divided into two regions, three transverse sections of the wake region(Station -0.5767, -1, -3) and five longitudinal sections of the wake((Z/(B/2)=0, 0.1, 0.2, 0.4, 0.6). In the wake region, large-scale longitudinal vortices of nearly same strength are symmetric with respect to the wake centerline and a relatively weak secondary vortex is formed near the waterline. With going downstream, the strength of longitudinal vortex is decreased and the wake region expands.

• Korean journal of applied entomology
• /
• v.28 no.3
• /
• pp.167-174
• /
• 1989

A confined field assessment on the integrated control of vector mosquitoes (Anopheles sinen- sis and Culex tritaent'orhynchus) was conducted by timely treatment of Bacillus thuringiensis(H-14) formulation in the presence of larvivorous fish (Aplocheilus lalipes) in natural rice fields of $30,000M^2$ at Yongam, South Korea Cholla Province from July through October in 1988. In presence of larvivorous fish (Aplocheilus) at lower density of 0.6 fish per $M^2$ water surface, mosquito vector control rates ranged 55. 0~57. 6% from July through August, and when the mosquio density started to increase with over 10 larvae on the average per sample, B.t.(H-14) formulation treatment at the rate of 1. 0 Kg/ha made 100% vectors reduc¬tion in 24 hours, the control sustained above 98% until the test was terminated on October 11th. In the fish introduced rice paddies with Aphyocypris chinensis at the density of above 1. 5 fish per $M^2$, a satisfactory degree of vector control was obtained by 88. 2~96. 7% in 2 week period until September 21st. In the absence of larvivorous fishes, B.t. (H-14) treatment made 100% control in 24 hours, however, vector population rebound appeared in day 7, required to make additional treatment to suppress population down.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.102-111
• /
• 2009

In this paper, we propose a de-interlacing algorithm that combines a motion compensation (MC) method and the vertical-temporal filter with motion compensation (MC V-T filter) according to motion compensation reliability. The MC method represent one of the best ways of improving the resolution of de-interlaced frames, but it may introduce motion compensation artifacts in regions with incorrect motion information. In these regions, the MC V-T filter that is very robust to motion vector errors can be used to correct motion compensation artifacts. The combination between two methods is controlled by the motion compensation reliability that is measured by analyzing the estimated motion vectors and the results of MC. The motion compensation reliability contains information about motion compensation artifacts of MC results and determines the combination weight according to this information. Therefore, the combination rule of the proposed method is more accurate than those of the conventional methods and it enables the proposed method to provide high quality video sequences without producing any visible artifacts. Experimental results with various test sequences show that the proposed algorithm outperforms conventional algorithms in terms of both visual and numerical criteria.