• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.893-900
• /
• 2021

In this study, air density in a narrow test section is measured using a laser absorption spectroscopy system that detects oxygen absorption lines. An absorption line pair at 13156.28 and 13156.62 cm^-1 are detected. A gas chamber with a height of 40 mm is used as a narrow test section. A triangular spiral-shaped laser path is applied in the gas chamber to amplify absorption strength by extending laser beam path length. A well-known logarithm amplifier and a secondary amplifier are used to electrically amplify absorption signal. An AC-coupling is applied after the logarithm amplifier for signal saturation prevention and noise suppression. Procedure of calculating spectral absorbance from output signal is introduced considering the logarithm amplifier circuit configuration. Air density is determined by fitting the theoretically calculated spectral absorbance to the measured spectral absorbance. Test conditions with room temperature and a pressure range of 10~100 kPa are made in a gas chamber using a Bourdon pressure gauge. It is confirmed that air density in a narrow test section can be measured within a 16 % error through absorption signal amplification using a triangular spiral-shaped beam path and a logarithm amplifier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.752-762
• /
• 2001

소프트웨어의 유지보수 과정에서 효율적인 복잡성 척도와 테스트 경로의 생성은 중요한 문제이다. 대부분의 경우 테스트 경로의 생성과 복잡성 척도의 측정은 독립적인 기법이 필요하다. 본 논문에서는 테스트 경로의 생성과 복잡성 척도를 통합적으로 생성하고 있다. 제안한 기법은 PUT(Program Under Test)를 확장한 페트리네트 그래프(EPG)를 이용하여 모델링하고 이것의 통합적인 분석을 통하여 테스트 경로를 생성하며, 이 과정에서 생성된 실행경로의 제어구조별 평균 발생 빈도수를 이용하여 복잡성 척도 EV(G)를 구하였다. EV(G)는 실제 프로그램의 실행경로에 기반을 두었기 때문에 프로그램의 제어구조별 차이점 외에도 프로그램의 동작 특성을 복잡도에 잘 반영할 수 있다. 본 논문에서 제안한 통합 기법에 의한 테스트 경로 생성 기법과 복잡성 척도를 소프트웨어의 유지보수에 활용한다면 노력과 비용의 절감 및 소프트웨어의 질적 향상을 가져올 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2112-2115
• /
• 2003

In this paper, we describe a SSAS (stepping stones attack simulator) that is automatic tool for testing and evaluation in TCP connection traceback system. The SSAS can pass multiple hosts that are included with hacker, middle-path hosts and victim’s system. And SSAS can also attack through commands to exploit the victim’s system. Usually, hackers do not expose their real attack positions through compromising the middle-path hosts like stepping-stones. Namely, hackers perform the stepping stones attacks in Internet. The SSAS can be utilized by developments and tests of the various countermeasure techniques of hacking. Specially, in this paper, it is used to test the performance of TCP connection traceback system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.927-932
• /
• 2007

The sophisticated mathematical model is required for the design and the database construction of the advanced flight control system of UAV. In this paper, flight test of KARI's research UAV, often called DURUMI-II, is implemented for the data acquisition from the maneuver flight. The flight path reconstruction is implemented to ensure that the measured data is consistent and error free. The nonlinear system identification for the refined mathematical modeling is implemented with the verified measurements from the flight path reconstruction. The simulation with the identified results have a good validation when the simulated responses were compared to the flight tested data.

• Journal of the Korean Home Economics Association
• /
• v.30 no.1
• /
• pp.163-178
• /
• 1992

The purpose of this study was to test system model for family resources management developed by Deacon and Firebaugh. The data were collected by means of a questionnaire destributed to a stratified sample of 600 housewives living in Seoul. The questionnaires specially developed by the researchers contained of 118 items. the coefficient alpha reliability estimate for this instrument was conducted using Cronbach' procedures. The data were analyzed using frequency, percentile, mean, step wise multiple regression and path analysis. The results of path analysis showed that the level of the elements of satisfaction with the management was correlated with demands(the household size, the age of the last child, employment status of respondents), resources(marital satisfaction, health of respondents), and throughput(standard setting, reality in planning, the existence of facilitating conditions). A system model for family resource management received considerabel empirical support. This presumed that the components of demands lead to the lower satisfaction with management. The throughput components were also important in explaining satisfaction with management some of research and methodology issues for the advanced study were suggested.

• International Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2016

This paper presents a series of path models that were developed to test whether financial risk tolerance mediates the association between the following four variables and investing behavior: (a) male and married, (b) female and married, (c) male and single, or (d) female and single. Data for this study were obtained from a proprietary consumer survey of risk-tolerance attitudes. Four path models were developed to test relationships among the variables in 2008, 2009, 2010, and 2011. These years were chosen to represent the depth and recovery periods in the Great Recession. The total number of respondents was 29,641. Findings showed that financial risk tolerance was positively associated with risky investing behavior (i.e., equity ownership) in each of the four periods. The associations among the gender-marital status variables and investing behavior were mixed; however, findings did indicate that risk tolerance mediates these relationships by sometimes amplifying and occasionally attenuating risky behavior. Based on the findings, implications and limitation are presented.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.2
• /
• pp.142-150
• /
• 2001

Due to naturally formed copper oxides, the adhesion strength between copper and epoxy resin is often very poor. To improve the adhesion strength between copper and epoxy resin, Cu-based leadframe sheets were oxidized in a brown-oxide forming solution. Then the effect of brown-oxide formation on the adhesion strength of leadframe to epoxy molding compound (EMC) was studied using pull-out specimens. After the pull-out test, fracture surfaces were analyzed using SEM, AES and EDS to determine failure path. The results showed that the failure path lay over inside the CuO and inside the EMC irrespective of the pull strength.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.282-289
• /
• 2017

Objectives: It was aimed to compare the cyclic fatigue resistances of ProGlider (PG), One G (OG), and HyFlex EDM (HEDM) nickel titanium glide path files in single- and double-curved artificial canals. Materials and Methods: 40 PG (16/0.02), 40 OG (14/0.03), and 40 HEDM (10/0.05) single-file glide path files were used in the present study. Sixty files were subjected to cyclic fatigue test by using double-curved canals and 60 files by using single-curved canal (n = 20). The number of cycles to fracture (NCF) was calculated and the length of the fractured fragment (FL) was determined by a digital micro-caliper. Twelve pieces of fractured files were examined with scanning electron microscope to determine fracture types of the files (n = 2). The NCF and the FL data were analyzed using one-way analysis of variance and post hoc Tukey test using SPSS 21 software (p < 0.05). Results: In all of the groups, NCF values were significantly lower in double-curved canals when compared to single-curved canals (p < 0.05). For both of single- and double-curved canals, NCF values of HEDM group in apical and coronal curvatures were found to be significantly higher than NCF values of PG and OG groups (p < 0.05). In both of single- and double-curved canals, NCF value of PG group was found significantly higher than OG group (p < 0.05). Conclusions: Within the limitations of this study, HEDM glide path files were found to have the highest cyclic fatigue resistance in both of single- and double-curved canals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.243-257
• /
• 2010

Rapid developments in wireless sensor networks have extended many applications, hence, many studies have developed wireless sensor network positioning systems for indoor environments. Among those systems, the Global Position System (GPS) is unsuitable for indoor environments due to Line-Of-Sight (LOS) limitations, while the wireless sensor network is more suitable, given its advantages of low cost, easy installation, and low energy consumption. Due to the complex settings of indoor environments and the high demands for precision, the implementation of an indoor positioning system is difficult to construct. This study adopts a low-cost positioning method that does not require additional hardware, and uses the received signal strength (RSS) values from the receiver node to estimate the distance between the test objects. Since many objects in indoor environments would attenuate the radio signals and cause errors in estimation distances, knowing the path loss exponent (PLE) in an environment is crucial. However, most studies preset a fixed PLE, and then substitute it into a radio propagation loss model to estimate the distance between the test points; such method would lead to serious errors. To address this problem, this study proposes a Path Loss Exponent Estimation Algorithm, which uses only four beacon nodes to construct a radio propagation loss model for an indoor environment, and is able to provide enhanced positioning precision, accurate positioning services, low cost, and high efficiency.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.233-240
• /
• 2015

About 500 Bizcool High School will be designated by the year of 2017. The policy of designating Bizcool will promote startup club activity among Bizcool high school Student. In particular, the startup club activities will help Bizcool high school student fixing their career path after graduation by enhancing their creativity, leadership, team spirit, and problem solving ability through understanding the concept of entrepreneurship and embodying the startup process taking real startup experience. Hence, this paper set and test hypothesis of assuming the differences with respect to entrepreneurship will and maturing career path whether they have startup club activity as presenting Bizcool high school or not. The empirical test have bee done over 274 Bizcool high school students. The result have shown that significant level of differences(Determinants and Confidence) are found between the group of having startup club activity and those of not having.