• 대한물리치료과학회지
• /
• 제30권1호
• /
• pp.31-40
• /
• 2023

Hamstring flexibility is an important factor that affects muscle performance of the lower extremities and is closely associated with sports injuries. Therefore, evaluation of flexibility is important in clinical practice. Results of evaluation are determined by types of tests and cut-off values used; therefore, accurate and detailed understanding of these is necessary before examination. Although the straight leg raise and sit and reach tests are used to evaluate hamstring extensibility, structures including the nerves, fascia, and other muscles can significantly confound the results of these tests. The knee extension test is performed at 90° of hip flexion to minimize the posterior pelvic tilt that occurs during the straight leg test. The knee extension test is most recommended for selective evaluation of hamstring flexibility. The knee extension test is classified into active and passive tests. The cut-off value is usually set at 20° for the active and at 10° for the passive knee extension test. Although a strong association is observed between the two tests, the active knee extension test is preferred in clinical practice because it can be performed by a single examiner, which serves as an advantage. Age, sex, and warm-up exercise tend to affect flexibility; therefore, results should be interpreted with caution. Detailed understanding of each flexibility test is important for reliable evaluation.

• 한국도로학회논문집
• /
• 제8권3호
• /
• pp.21-28
• /
• 2006

Field or laboratory wheel tracking tests have been employed for the evaluation of the rutting potential of asphalt paving mixtures. Compared to field tests, laboratory wheel tracking tests are much less expensive and more manageable for most road projects. However, most test laboratories are not equipped to perform such tests because there does not exist any standard test procedure, and the required equipment is rather expensive. Futhermore, the size of test specimens and the relatively large quantity of test mixture required present difficulties for laboratory specimen mixing and compaction. This paper describes a project conducted to study the feasibility of replacing wheel tracking testsby a repeated-load creep test for rutting potential evaluation. Comparisons were made between the results of the two tests for different test temperatures, loading speeds and applied pressures. Three types of asphalt mixtures were studied in the test program. Favorable conclusions concerning the use of the repeated-load test for rutting potential evaluation were drawn based on the findings of the experimental test results. The correlation between the two types of tests was found to be good for all threeasphalt mixtures. Adopting the repeated-load creep test would lead to cost savings since it employs standard test equipment already available in most laboratories. It would also result in substantial time savings due to the much smaller quantity of mix needed, and the ease in specimen preparation.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.471-478
• /
• 2014

Navy forces of ROK asked for more than 90% operational availability in the requirement document of combat ship. This study proposes the evaluation methodology of operational availability with the evaluation process, calculation formula, analysis of operational test data. As the case study, the developed methodology is proved to apply for 00 batch-I naval ship using the data to be acquired during the operational test period. The operational availability by test data was 90.03%, and it was satisfied with objective value 90%. The paper will contribute not only to establish the evaluation methodology of operational availability for combat ship but also other general weapon system.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.387-394
• /
• 2024

This paper describes a progressive test and evaluation strategy for verification of Korean Fighter eXperimental (KF-X) AESA(Active Electronically Scanned Array) radar development. Three progressive stages of development test and evaluation were officially performed from simulated test conditions to actual operating conditions according to standards: radar function/performance and avionics integration. KF-X AESA radar development is repeatedly verified by progressive stages consisting of five tests: Roof-lab ground test, System Integration Laboratory(SIL) ground test, Flying Test Bed(FTB) test, KF-X ground test, and KF-X flight test. As a result, the risk factor decreases as stages and tests progress. Therefore, development test and evaluation of KF-X AESA radar are successfully performed at low development risk.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.282-291
• /
• 2010

In line with current speed-up of railroad, a slab track has been increasingly adopted in a bid to secure the safety of track structure as well as to reduce the maintenance cost, and furthermore, the need for commercialization of domestically-developed swing-nose crossing turnout on slab track has been on the rise. For commercialization of swing-nose crossing turnout on slab which was developed in Korea, a technical and systematic performance evaluation system, considering local environment, shall be established and then the performance evaluation shall be accordingly implemented. This paper was intended to summarize the performance evaluation system, referring to the data available at home and abroad and the results of performance evaluation for domestically-developed swing-nose crossing turnout on slab track carried out to date based on that system. A performance evaluation system comprises the technical requirement appropriateness evaluation(component performance evaluation and design verification), laboratory test and on-site test. For domestically-developed swing-nose crossing turnout on slab track, appropriateness evaluation and laboratory test have been completed and the on-site test of those installed on the 2nd phase of Kyung-Bu HSR is underway now.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1031-1036
• /
• 2011

In this paper, we have proposed a methodology which can test and evaluate on system level in development phase of command guided missile system. Test and evaluation play a significant role in the development of weapon system, providing the means for determining to what extent the weapon system satisfies its requirements, whether it functions normally in the operational environment. In case of command guided missile having seeker, the missile communications link provides data to allow the missile to fly an efficient trajectory toward target. Therefore, it is very important to test and evaluate for data link between missile and radar on whole system aspect. we introduce the concept and devices for system level test and evaluation of command guided missile system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1736-1740
• /
• 2003

There have been various studies to find out the correlation between subjective and objective evaluation ride comfort in vehicle. To be proper, subjective evaluation considers the signal pattern of vibration generated by vehicle. In this study, driving test is carried out to extract the correlation between subjective evaluation by subjects and vibration signals measured on the seat when a test vehicle is passing over test bumpers, which have two sorts of width change and height change respectively. A unique reference bumper is used to be compared with the relative comfort of test bumpers.

• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.114-121
• /
• 2003

In this paper, a new evaluation system was developed for ride comfort test and vibration level test on railway vehicles. These tests are carried out by applying different equipments and test procedures before now. But this developed system is capable of ride comfort test and vibration test by a single integrated system. Also, the evaluation algorithm for the ride comfort was compared and verified by simulation results with VAMPIRE software. With this developed system, the comfort in a passenger coach and the vibration in a freight car were verified by the results in field test.

• 대한통합의학회지
• /
• 제11권1호
• /
• pp.31-41
• /
• 2023

Purpose : This study was conducted to identify the common characteristics of older persons with sarcopenia and to explore the relationship between gait, balance, and stress using an integrated assessment tool. Methods : In this study, 95 people aged 65 years or older were screened using the sarcopenia diagnostic evaluation algorithm presented by the Asian Working Group for Sarcopenia in 2019. Skeletal muscle index, grip strength, and short physical performance battery were used as sarcopenia evaluation measurements. Based on the results of this evaluation, participants were grouped into the 'non-sarcopenia group' (41 participants) or the 'sarcopenia group' (54 participants). Participants underwent further assessment using an integrated evaluation tool capable of measuring gait, balance, and stress. Gait ability was evaluated using the timed up and go test, and balance ability was evaluated using the berg balance scale. And the stress of the last month was measured by modifying the stress index developed by a Korean researcher. Collected data were statistically analyzed using the independent t-test and Mann Whitney-U test. Results : The sarcopenia group and the non-sarcopenia group showed significant differences in all elements of the sarcopenia diagnostic evaluation. There were significant differences in all three integrated evaluation tools. For the evaluation of walking ability, the time measured in the timed up and go test was longer in the sarcopenia group, the berg balance scale score for the evaluation of balance ability was lower in the sarcopenia group, and the stress index was higher in the sarcopenia group. Conclusion : Through sarcopenia analysis using an integrated evaluation tool, it was confirmed that sarcopenia is closely related to decreased walking ability, poor balance, and increased stress. We recommend using this tool to reduce the risk of sarcopenia progression and stress exposure through the planning and implementation of an exercise program for sarcopenia prevention.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.477-484
• /
• 2001

In this paper shows the evaluation of the liquefaction potential of soils using in situ test. There are different types of in situ test used in the evaluation the liquefaction potential. In the particular study the Standard penetration test(SPT), Cone penetration test(CPT), ad Seismic cone penetration test (SCPT) were used. The SPT N value has been used all over for a very long time. The evaluation of the liquefaction of soil was preformed using the worldwide renowned CPT and SCPT. Shake 91 program was used to evaluate the results obtained by different in situ test and were later analyzed.