• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.33-41
• /
• 2011

The objective of this study was to compare the shear bond strengths of five dentin adhesive systems cured with three different light curing sources. Seventy five noncarious permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). And three light curing unit systems were used: Elipar Free light 2(LED), OptiLux 501 (Halogen), Flipo (PAC). For the shear bonding test, the labial and lingual surfaces of permanent teeth were used. To obtain a flat dentin surface, the labial and lingual surfaces of the teeth were sanded on SiO2 with number 600 grit and then divided into 15 groups of 10 surfaces each. All samples were theromocycled in water $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles. The results were as follows: 1. When cured with Freelight 2, the shear bond strength of SM was significantly higher than that of PL, GB (p<0.05), whereas no significant difference was found among those of any other bonding agents. 2. When cured with Optilux 501, the shear bond strength of SM was significantly higher than those of any other bonding agents (p<0.05), whereas no singnificant difference was found among those of andy other bonding agents. 3. When cured with Flipo, the shear bond strength of SM was significantly higher than those of SB, SE, GB (p<0.05), whereas no significant differences was found among those of any other bonding agents. 4. For comparison according to three different light cure unit system, except SB and GB, each three dentin bonding agents showed no significant difference. For SB, only Freelight 2 was significantly higher than the others, with no significant difference between Optilux 501 and Flip. For GB, Statistically significant difference was found only between Freelight and Flipo.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.427-433
• /
• 2001

The purpose of this study was to investigate the effect of chitosan on the shelf-life and quality of Paeksulkis(Korea rice cake). Paeksulgis containing 0-0.5% chitosan were stored at 5$^{\circ}C$ for 4 week and 2$0^{\circ}C$ for 1 week to test the effect of extenting shelf-life of Paeksulgis by chitosan. The pH of Paeksulkis was 5.65 without chitosan and pH of those were about 7.0(6.94-7.01) with 0.05-0.5% level of chitosan. Moisture content of Paekrukis wish or without chitosan was 38-40%. In Hunter’s color values of Paeksulkis of control, the lightness (L) was 84.28, redness(a) was -1.56 and yellowness(b) was 7.68. The lightness (L), redness(a) and yellowness(b) of Paeksulkis were increased by the increasing concentration of chitosan. In mechanical characteristics, cohesiveness concentration of Paeksulkis were the highest in control while obtained the highest score in color, after swallowing and overall quality (p<0.05). The score of flavor and consistency of Paeksulkis with different levels of chitosan wre not significant while the score of moisture in Paeksulkis with 0.05-0.5% level of chitosan was significantly higher than control (p<0.05). The score of flavor and consistency of Paeksulkis with different levels of chitosan were not significant while the score of moisture in Paeksulkis with 0.05-0.5% level of chitosan was significantly higher than control (p<0.05). Total bacterial counts (TBC) of Paeksulgis immediately before storage were 4.2$\times$10$^2$CFU/g in control and those containing 0.3-0.5% of chitosan were 0.5-1.0 log cycle lower than control. TBC of Paelsulgis containing chitosan was lower than increased for 2 weeks, reached at 1.8$\times$10$^{5}$ CFU/g and decreased for 2 weeks, reached at 1.8$\times$10$^4$CFU/g during storage at 5$^{\circ}C$. TBC of Paeksulkis with more than 0.3% of chitosan were 1.9 log cycles lower than that of control during storage at 5$^{\circ}C$. TBC of Paeksulkis with more than 0.3% of chitosan were 1.9 log cycles lower than that of control during storage at 5$^{\circ}C$ for 4 weeks. TBC of Paeksulgis increased to 10$^{8}$ CFU/g in control and 10$^{6}$-10$^{7}$ CFU/g in more than 0.3% chitosan during storage at 20$^{\circ}C$ for 1 week. The shelf-life of Paeksulkis was increased with increasing concentration of chitosan both temperature at 5$^{\circ}C$ and 20$^{\circ}C$.

• Journal of Veterinary Clinics
• /
• v.20 no.1
• /
• pp.33-41
• /
• 2003

The cardiopulmonary and anesthetic effects of tiletamine/zolazepam(TZ, 10 mg/kg IV), xylazine-tiletamine /zolazepam(XTZ, X: 1.1 mg/kg IM, TZ: 10 mg/kg IV) and medetomid-ine-tiletamine/zolazepam(MTZ, M: 30$\mu\textrm{g}$/kg IM, TZ: 10 mg/kg IV) were evaluated to 15 healthy mongrel dogs (4.16$\pm$0.65 kg). These dogs were randomly assigned to the three treatment groups(Control, XTZ, MTZ) with 5 dogs in each group. All experimental animals were premedicated with atropine(0.03 mg/kg, IM). Xylazine or medetomidine were administered to dogs in XTZ group and MTZ group 10 minutes after atropine injection. TZ was administered 20 minutes after atropine injection in all groups. The loss of pain response at pedal reflex and ear pinching tests in XTZ and MTZ groups were much longer compared with those of Control group(P < 0.01). All dogs in this study showed head rocking and hypersalivation during recovery time. Body temperature decreased progressively during experimental period in all groups, but it was not significant. After TZ injection, heart beat rate significantly increased 10 and 20 minutes in Control group, and 20 and 40 minutes in XTZ group(P < 0.05). Respiratory rate significantly decreased 0,10,20 and 40 minutes after 72 injection in XTZ and MTZ groups. In Control group, systolic arterial pressure (SAP) 20 minutes. diastolic arterial pressure(DAP) 10 minutes and mean arterial pressures (MAP) 10 and 20 minutes after 72 injection significantly decreased(P < 0.05). In XTZ group, SAP, DAP and MAP significantly decreased 20 and 40 minutes after 72 injection(P < 0.05). Thus, it was considered that XTZ and MTZ were useful in a canine surgical treatment that requires long anesthetic duration and deep analgesia.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.245-250
• /
• 2014

This study developed allometry equation and estimated the aboveground-biomass of Quercus glauca, a warm-temperature, evergreen broad-leaved tree, growing in Kotzawal wetland located on Jeju Island. The allometric equations between DBH(diameter at breast height) and dry weights of stems (Ws), branches (Wb), leaves (Wl) and aboveground biomass (Wab) of Q. glauca were as follows: logWs=2.4042logDBH-1.3045, logWb=2.6436logDBH-1.6232, logWl =1.5428logDBH-1.3692 and logWab=2.3324logDBH-0.9181. The allometric equations between $D^2H$ and Ws, Wb, Wl, and Wab of Q.glauca were as follows : logWs=$0.853logD^2H-1.4252$, logWb=$0.8453logD^2H-1.5834$, logWl=$0.5328logD^2H-1.4073$ and logWab=$0.8453logD^2H-1.0327$. The $R^2$ between DBH and Ws, Wb, Wl and Wab were 0.9873, 0.9711, 0.7979 and 0.993, respectively. The $R^2$ between $D^2H$ and Ws,Wb,Wl and Wab were 0.9841, 0.9174, 0.7537 and 0.9876, respectively. There was no significant difference between observed and calculated values of the allomatric equations from DBH and $D^2H$(p>0.05, Kolmogorov-Smirnov test). Thus, to estimate the aboveground biomass of Q. glauca, use of DBH and $D^2H$ as an independent variables in the allometric equation is recommended.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.4
• /
• pp.276-283
• /
• 1997

This experiment was conducted to investigate the optimum temperature and the effects of sulfuric acid, flowing water and $GA_3$ on the germination of Bupleurum falcatum. At the same time, the effect of germination-related compounds in Bupleurum falcatum seed was tested. Among the tested temperatures $(15,\;20,\;25\;and\;30^{\circ}C)$ the highest germination rate was obtained at $15^{\circ}C$. The optimum soaking time of sulfuric acid was 5 minutes at the concentration of both 0.1 and 1.0%. At the same time, the germination rate was highest when Bupleurum falcatum seed was washed for 2 days in the flowing water before germination test. The effect of $GA_3$ on the germination was highest at 100 ppm out of 10, 50 and 100 ppm. Regardless of treatments, the germination rate of Jeongseon species was higher than that of Mishima species. SEM photographs revealed that most of germination-inhibiting substances in the seed coat were washed away by rinsing in the flowing water for 2 days thus the seed coat became more smooth. The 4, 000 ppm alcohol extract of Bupleurum falcatum seeds inhibited the germination of lettuce seeds as much as 41.7% in Jeongseon species and 58.3% in Mishima species. The higher extract concentration from seed of Bupleurum falcatum, the lower the germination of lettuce seeds was obtained. Out of phenolic acids, the contents of orchinol, pyrogallol, and p-hydroxybenzoic acid were highest in both varieties. Compared with Mishima species, Jeongseon species showed much higher content of salicylic and vanillic acid.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2010

The LCC (Liquid Cadmium Cathode) structure to be developed for inhibiting the formation and growth of the uranium dendrite has been known as a key part in the electrowinning process for the simultaneous recovering of uranium and TRU (TRans Uranium) elements from spent fuels. A zinc-gallium (Zn-Ga) experimental system which is able to be functional in aqueous condition and normal temperature has been set up to observe the formation and growth phenomena of the metal dendrites on liquid cathode. The growth of the zinc dendrites on the gallium cathode and the performance of the existing stirrer type and pounder type cathode structure were observed. Although the mechanical strength of the dendrites appeared to be weak in the electrolyte and easily crashed by the various cathode structures, it was difficult to effectively submerge the dendrite into the bottom of the liquid cathode. Based on the results of the aqueous phase experiments, a lab-scale electrowinning experimental apparatus which are applicable to the development of LCC srtucture for the electrowinning process was established and the performance tests of the different types of LCC structure were conducted to prohibit the uranium dendrite growth on LCC surface. The experimental results of the stirrer type LCC structures have shown that they could not effectively remove the uranium dendrites growing at the inner side of the LCC crucible and the performances of the paddle and harrow type LCC structure were similar. Therefore a mesh type LCC structure was developed to push down the uranium dendrites to the bottom of the LCC crucible growing on the LCC surface and at the inner side of the crucible. From the experimental results for the performance test of the mesh type LCC structure, the uranium was recovered over 5 wt% in cadmium without the growth of uranium dendrites. After completion of the experiments, solid precipitates of the bottom of the LCC crucible were identified as an intermetallic compound (UCd11) by the chemical analysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.261-266
• /
• 2009

All of the subjects of the investigation (n=141) were schools that have food services under direct management. The number of students who get food services at the schools were $1,001{\sim}1,500$ students with 46.8% investigation. In school food services, fried foods were highly preferred and the biggest merits of fried foods were (in order of highest importance) 'improvement of food services satisfaction'> 'source of calories supply'> 'easiness of cooking process'. Service frequency of fried food were in the order of 'twice a week'> 'three times a week'> 'once a week', and for the factors to decide service frequency of fried food, 'preference leaning on fried food', and 'excessive fat intake' were the most considered. The most considered factors in the case of choosing fried food were 'preference' and 'calories and nutritional value'. For the cautious steps during the frying process, 'keeping after frying' was picked the most, and the reasons were 'lack of containers to keep in appropriate temperature and quality' and 'time consuming'. For preference and service frequency of ingredients in fried foods, 'chicken' and 'pork' were very high. As the result, it was analyzed that preference by ingredients matched service in school lunches by using a ranking test. Total cooking and processing time of fried foods required in school lunches were approximately $237{\pm}99$ minutes ${\sim}291{\pm}141$ minutes which showed total required time was about same no matter what ingredients were used. As the result of comparing and analyzing the processes, vegetables took less thawing and frying time, but the processing time for vegetables was more complicated since handling time before frying was longer compared to meat. In the important management process by the main groups of fried foods, the frying process was the most cautious cooking process in the category of meat or fish and shellfish used as ingredients. In addition, if vegetables were used as ingredients, storing it after frying was the process that needed the most care.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.4
• /
• pp.95-113
• /
• 2009

Objectives : Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) is a hair care product which is composed of ten plant extracts used in oriental medicine. This study was carried out to investigate the effects of Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) on hair regrowth and cytokine changes in a shaving model of C57BL/6 mice. Materials and Methods : Five-week-old mice were acclimated for 1 week at a temperature between $21-23^{\circ}C$, 40-60% relative humidity, and 12h of a light/dark cycle before beginning of the experiment. There were three experimental groups including 50% ethanol (EtOH, control), a positive control of 3% Minoxidil, and 30% Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) in 50% ethanol in 18 female mice. The test compounds were topically treated once a day over 12 days. The hair regrowth was photographically and histologically determined during the experimental period of 12 days. Revelation of EGF, $TGF-{\beta}1$ and IL-6 in hair follicle were also determined using immunohistochemistry. In addition to that, IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ in skin tissue were determined using enzyme-linked immunosorbent assay(ELISA). Results : Hair regrowth in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups was promoted earlier and faster than the control group. Concentrations of hairs and thick-hair ratio in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups were promoted than the control group. EGF was moderately positive in hair follicle of 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups, but negative in the control group. $TGF-{\beta}1$ was not significantly difference between the groups. IL-6 in hair follicle of Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) group was negative, but weakly positive in 3% Minoxidil and control group. IL-6 and $IL-1{\beta}$ in skin tissue were significantly decreased in Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) group, but there was not significantly decreased in 3% Minoxidil and control group. $TNF-{\alpha}$ in skin tissue was significantly decreased in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups. Conclusions : These results suggest that Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) has hair growth promoting activity and it can be used for treatment of alopecia. And these effects relate to EGF revelation of hair follicle and a decrease IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ in skin tissue.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.231-237
• /
• 1984

Changes in available lysine and water soluble proteins were checked to obtain the desirable condition of processing for boiled Neverita didyma under the various autoclaving temperatures and times. It was also carried out to assess the affect of heat treatments upon the solubility of coagulable substances in boiled products. In order to evaluate the nutritional quality of processed Neverita didyma under the highest available lysine retention and without bacteria, it was studied the value of pepsin-pancreatin digest residue index in comparison with unprocessed (raw) material. The crude protein content of raw material was higher than that of the other mollusks, while the content of crude fat was showing lower value. It was noticed that the higher contents of coagulable substances and water soluble proteins in processed Neverita didyma were obtained under the conditions, retort temperature at $120^{\circ}C$ above, and 40-60 min. sterilization. After the pannel test, the coagulable substances were not found below the level of $0.40{\pm}0.03$ gram nitrogen/ml of juice. The remarkable retention of available lysine (FDNB-reactive lysine) was resulted in the conditions of autoclaving at $115^{\circ}C$ for 40 minutes in boiled Neverita didyma products, and that processing condition was coincide with the condition of commercial sterilization for boiled top shell. It was revealed that the boiled meat of Neverita didyma showed the higher PPDRI(65.85) than that of raw material (63.16).

• Korean journal of applied entomology
• /
• v.25 no.1 s.66
• /
• pp.41-46
• /
• 1986

Exogenous factor and nutrients affecting for conidial germination of Colletetrichum dematium f. sp. capsicum causing red pepper anthracnose were studied by slide germination test. Optimum temperature of conidial germination was at $28^{\circ}C$, ranging 15 to $35^{\circ}C$. Optimum pH was at 5.5, ranging 4.5 to 8.0, and more than 90% of relative humidity (RH) was optimum. Poor conidial germination of the fungus was observed on sterile distilled water, but potato sucrose broth (PSB), red pepper fruit broth (RPFB), green pepper fruit broth (GPFB) and pepper leaf broth (PLB) furnished a satisfactory nutrients for conidial germination. Exogenous supply of carbon and nitrogen sources were essential for conidial germination, while potassium, phosphorous and sulfur were not evident as that for carbon and nitrogen. Soluble starch was the most suitable as a carbon source for conidial germination and followed by D-glucose, D-galactose and lactose in that order. Maximum germination was attained in the $1{\times}10^4$ conidia per ml. Germination was decreased with increment of conidial concentration, and in the density of $5{\times}10^4$ conida per ml, germination was nearly supipressed. It suggested existing a self-inhibitor. Non-washed conidia germinated more than washed conidia, and conidial germination was also gradually decreased by increasing conidial density.