• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.553-561
• /
• 2008

The purpose of this research was to analyze the relationship between the ease of crotch depth and the mobility of leg movement. Ten Korean men were participated as subjects and 0. 3, 6cm of crotch ease were inserted for test clothes. To analyze objectively, range-of-motion of four selected movements was measured by Leighton flexometer and goniometer. Also. wearer acceptability rating was measured for subjectively investigation. Anova and Duncan's range tests were used for statistical analysis. According to the results, 3cm of crotch ease was most comfortable. The mobility of test clothes with 3cm crotch ease was improved largely in every test movement(16.2% and 16.6% in segittal plane, and 6.1% and 6.2% in frontal motion).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.161-165
• /
• 2004

The main goal of this work is to study the effect of glass fiber volume fraction on the result of tensile test with respect to glass fiber/polypropylene(GF/PP) composites. The tensile test and failure mechanisms of GF/PP composites were investigated in the fiber volume fraction range from 10% to 30%. The tensile strength and the fracture strength increased with the increasing of the fiber volume fraction in the tested range. Fiber pull-out and debonding of this composites increased with the fiber volume fraction in thc tested range. The major failure mechanisms were classified into the debonding, the fiber pull out, the delamination and the matrix deformation.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.69-71
• /
• 2008

We have developed a current range extension method to obtain the ratio error and phase displacement of a current transformer (CT) by using absolute evaluation method and two different CTs. The method was applied to CTs under test with the current ratios of the range of 5,000 A / 1 A - 20,000 A / 1 A. The ratio error and phase displacement of the CT under test obtained in this study are consistent with those measured at the national institute in Germany using the same CT under test within an expanded uncertainty (k = 2) in the overall current ratios.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.165-169
• /
• 2007

Qualification test range for Lox/Kerosene gas generator cyle liquid rocket engine was determined by considering engine dispersion and flight inlet conditions. With various pump characteristics, the operation range of components and system was investigated through dispersion analysis. The variation of engine performance shows opposite trends in calibration and dispersion.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.332-338
• /
• 1999

Surface hardening of plain carbon steel (SM$%C) by Laser are usually much finer and stronger than those of the base metals. The present study was undertaken to investigate the wear resistance and a processing parameters such as, power density, pulse width, defocusing distance, and molten depth for surface modification of plain carbon steel. The wear test was carried out under experimental condition using the wear test device, and in which the annular surfaces of wear test specimens as well as mating specimen of alumina ceramics(Al2O3) was rubbed in dry sliding condition. It is shown that molten depth and width depend on defocusing distance. The wear loss on variation of sliding speed was much in lower speed range below 0.2m/sec and in higher speed range above 0.7m/sec, but wear loss was little in intermediate speed range. It depends on oxidation speed and wear speed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.63-70
• /
• 1999

Surface hardening of plain carbon steel (SM45C) by Laser are usually much finer and stronger than those of the base metals. The present study was under taken to investigate the wear resistance and a processing parameters such as, power density, pulse width, defocusing distance, and molten depth for surface modification of plain carbon steel. The wear test was carried out under experimental condition using the wear test device, and in which the annular surfaces of wear test specimens as well as mating specimen of alumina ceramics($Al_2O_3$) was rubbed in dry sliding condition. It is shown that molten depth and width depend on defocusing distance. The wear loss on variation of sliding speed was much in lower speed range below 0.2m/sec and in higher speed range above 0.7m/sec, but wear loss was little in intermediate speed range. It depends on oxidation speed and wear speed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1139-1146
• /
• 2010

Simulated target generators are used to evaluate the various radar performance. Using the radar parameters such as target range(time delay), doppler frequency, target RCS, simulated target generator can be developed. Especially moving targets are simulated by control time delay and update target signal intensive for target range. Base on this concepts, in this paper, simulated target generators are designed and developed for X-band Radar performance test. Developed equipment is evaluated its performance and then tested with X-band Radar. This paper presents these design, development, and test results of developed target generator.

• The Journal of Korean Physical Therapy
• /
• v.34 no.4
• /
• pp.140-148
• /
• 2022

Purpose: The purpose of this study was to investigate the effects of the scapulothoracic mobilization on subject with lateral epicondylalgia. This was done through lateral slide scapular test, grip strength, visual analogue scale, glenohumeral joint external rotation range of motion. Methods: Before the experiment, Lateral slide scapular test, grip strength, visual analogue scale, glenohumeral joint external rotation range of motion were measured. Scapulothoracic joint mobilization was applied and then measurements were taken again to compared the changes. Results: After applying the scapulothoracic joint mobilization, lateral slide scapular test, grip strength, visual analogue scale, glenohumeral joint external rotation range of motion significantly improved. Conclusion: This study found that the scapulothoracic mobilization was effective in improving functional aspects and pain on subject with lateral epicondylalgia. The results suggest that the scapulothoracic joint mobilization is a significant considered intervention method that could be used for subject with lateral epicondylalgia.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.135-141
• /
• 1997

Low velocity impact test and compressive residual strength test after impact were performed by using Hercules AS4/3501-6[45/0/-45/90]$_{2s}$ laminated plate to investigate the low velocity impact damage behavior and the post-impact strength degradation on orthotropic composite laminate plate. Due to the lateral impact losd, the load path showed "" shape according to the laminate central deflection. Damage in a laminate occurs by inclined matrix crack at the damage initiation load stage and vertical matrix crack, occurs on the outer surface. Evaluating the compressive residual strength after the low velocty impact test, it could be found that there is a transient range where the compressive residual strength drop suddenly in the initial damage which is in the matrix crack range and the initial delamination area. is in the matrix crack range and the initial delamination area.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.568-573
• /
• 2023

Range resolution is the ability to distinguish different targets placed in same angular direction but at different distances from the radar. Normally, Range resolution requirement is defined as the width of transmitting pulse. The width of transmitting pulse does not mean the ability to distinguish two different targets. Range resolution performance to detect and track targets separately depends on the signal processing and tracking algorithm not only the width of transmitting pulse. This paper analyzes the processing steps in algorithms to affect the range resolution performance and verifies the results by roof-lab ground test using beacon signal. As a result, to track targets with the same angular position separately, it is desirable to have larger range difference than plot-track association test gate.